Search
16 articles for “Batch Adsorption”
-
Performance Evaluation of H 2 SO 4 -Rice Husk-Moss Adsorbent for the Removal of Zn (II) Ion from the Effluent of Science Equipment Development Institute (SEDI)
Abstract: This research was carried out to investigate the potential of green algae (moss) with the support of H 2 SO 4 treated rice husk activated carbon using batch adsorption process for the removal of Zn (II) ions from SEDI industrial effluent. The rice husk- moss algae was activated using H 2 SO 4 . The effluent was characterized using atomic absorption spectrophotometer with initial concentration values of 12.3 mg/l for …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 1, 2022 · pp. 6–15 Read article
-
Synthesis and Characterization of Bamboo-Supported Nano Zerovalent Iron (NZVI-AB) for Cr(VI) Sequestration
Abstract: Remediation of chromium contaminated sites present both technological and economic challenges, as conventional methods are often too expensive and difficult to operate. In this study, bamboo supported Zero-valent iron (Fe0) nanoparticles were synthesized, characterized, and were tested for removal of Cr(VI). Fe0 nanoparticles were synthesized by the reduction of ferric chloride with avocado polyphenols and characterized by FTIR (Fourier transform infrared) spectroscopy and XRD (X-ray diffraction). Batch experiments were performed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 1–7 Read article
-
A Parametric Study of Methylene Blue Adsorption Using Low-cost Adsorbent
Abstract: This research focused on the adsorptive capacity of activated carbonaceous substance made from the peel of Spanish cherries to remove methylene blue dye from wastewater. Through batch adsorption tests, the impact of several variables on the percentage of dye removal was examined. These variables included adsorbent preparation temperature, adsorbent dosages, initial concentration of dye solution, process time, pH of dye solution, and operation temperature. It was found that using 1 …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 3, 2023 · pp. 10–16 Read article
-
Polymer Composite-Supported Jackfruit Peel Adsorbent for Enhanced Copper (II) Removal from Wastewater: Batch Equilibrium and Isotherm Analysis
Abstract: The increasing concern of disposal of copper-containing effluents into the environment has led to heightened interest in designing cost-effective, eco-friendly and scalable adsorbent systems. Traditional metals and synthetically engineered sorbents prove to be effective; however, these systems are energy intensive. Agricultural residues entrapped in polymer composite systems constitute an economically feasible solution to this environmental challenge. This work reports on the design, characterization and performance evaluation of an economical adsorbent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 375–390 Read article
-
Study of Adsorption of Nickel on Soil in Rural Area of Hadoti Region: An Ethical Approach to Reduce Soil Pollution
Abstract: Nickel (Ni), one of the toxic heavy metals, is widely distributed in soil and aquatic ecosystems. The chemical nature of the soil has a significant impact on the environment. The adsorption reaction of nickel in alkaline soils is the main topic of this research. The removal of Ni (II) from aqueous solutions uses soil as an adsorbent. Batch adsorption studies were used to study the effects of various factors, including …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 1, 2023 · pp. 25–30 Read article
-
Lead Ion Removal from Water Using Fava Beans Pod-Derived Phytoadsorbents: A Green Approach
Abstract: The contamination of natural ecosystems—particularly water bodies—with harmful chemical substances poses a serious environmental threat on a global scale. Among these contaminants, toxic heavy metals such as lead, arsenic, cadmium, and mercury are especially concerning due to their non-biodegradable nature and ability to accumulate in living organisms. These metals can enter the human body through the food chain, even at trace levels, leading to various severe health issues, including neurological, …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 53–58 Read article
-
Green Fabrication of Glutaraldehyde-Crosslinked Chitosan/PVA Biocomposite for Heavy Metal Removal from Wastewater
Abstract: Chitosan (CS) and Polyvinyl alcohol (PVA) are polymers that possess biodegradable, biocompatible, and non-toxic properties, making them suitable for wastewater treatment applications. The primary objective of this research is to chemically modify chitosan in a novel manner to enhance its ability to remove hexavalent chromium Cr(VI) from aqueous solutions. In this study, a composite material was synthesized by crosslinking PVA and CS with glutaraldehyde (GA), resulting in the formation of …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 59–83 Read article
-
Colour Removal from Effluents Using Micromaterials
Abstract: In this study, the ability of Micromaterials to adsorb color from an aqueous solution was investigated by using flocculants and activated carbon prepared from Rice Bran, an agricultural by-product, and batch mode adsorption experiments were conducted. The influence of various factors such as initial concentration (20, 40, 60, 80 mg/L), contact time, pH (4.0-9.0), and dosage on the adsorption capacity was investigated and optimal experimental conditions were ascertained. Adsorption data …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 2, Issue 1-3, 2012 · pp. 1–8 Read article
-
Adsorption of Congo Red Dye in Aqueous Solution using Moringa oleifera Seed Powder
Abstract: The feasibility of using Moringa oleifera seed for the Congo red adsorption from aqueous solution has been investigated as a low cost and an eco-friendly adsorbent. Adsorption studies were conducted on a batch process, to study the effects of contact time, initial dye concentration and adsorbent dosage. Maximum colour removal was observed at higher adsorbent dosage. The present dye removal decreased from 95% to 81% as the dye concentration has …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 1, 2021 · pp. 8–18 Read article
-
Biosorption of Fluoride from Aqueous Solution Using Ulva fasciata sp.: A Marine Green Algae
Abstract: Water is a useful and vital natural resource for sustaining life and environment that we have always thought to be available in abundance and free gift of nature. Enhanced industrial activity during recent decades has led to the discharge of unprecedented volumes of industrial waste water, which is a serious cause of environmental degradation. Excessive fluoride concentrations have been reported in ground waters of more than 20 developed and developing …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 2, 2017 · pp. 45–53 Read article
-
Soil Adsorption Study of Thiram on Four Indian Soils by Extractive Spectrophotometry
Abstract: Concern about the environmental impact of an extensive use of pesticides has prompted research into the environmental fate of these agents which is strongly influenced by the interactions between the pesticides and soil. With a view to studying the fate of thiram fungicide in soil and the extent of surface and groundwater contamination, the soil-adsorption of thiram on four Indian soils of different soil characteristics has been studied by an …
Published in Research and Reviews: A Journal of Toxicology · Vol. 1, Issue 1-3, 2011 · pp. 56–62 Read article
-
Removal and Recovery of Zn (II) from Electroplating Rinse Waters Using Cation-Exchange Resins in a Packed Column
Abstract: In the present study, adsorption of Zn (II) ion from rinse water of electroplating Zinc has been attempted by Indion 225 and Dueolite C20 cation exchange resins through batch and column mode. Based on isotherm analysis more efficient adsorbent is chosen for column mode adsorption studies. Indion 225 and Dueolite C20 cation exchange resins showed a remarkable increase in sorption capacity as 49.3mg/g and 13.9mg/g for Zn (II) ions respectively …
Published in Emerging Trends in Chemical Engineering · Vol. 1, Issue 2, 2014 · pp. 35–46 Read article
-
Evaluation of AGO Adsorption Rate Isotherms Using Adsorbent Formulation of Plantain Agbagba1 and Clay of Different Mix Ratio in Pollutant Remediation in Salt Water
Abstract: The application of some agro-based materials in combination with day soil, for the production of adsorbents were investigated in relationship to their performance in AGO (Diesel) treatment in a batch process unit. The research allows the model concept of Langmuir isotherm, Frundlich isotherm and Temkin Isotherm for the determination of the adsorption rate of the various isotherms with respect to the effect of the particle size and the mixed ratios …
Published in International Journal of Pollution: Prevention & Control · Vol. 2, Issue 2, 2024 · pp. 31–42 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article
-
Synthesis and Characterization of Green Synthesized Iron Nano Particle (GInP) Using Eucalyptus globulus for Lead Removal
Abstract: The application of green synthesized iron nanoparticle for the removal of lead is researched in this study. The FT-IR and XRD results reveal that a nanoparticle with 80 nm size could be synthesized using Eucalyptus globulus leaf extract. The specific surface area of the nanoparticle was found to be 59 m2/g. The lead removal capability of the green synthesized iron nanoparticle (GInP) was investigated for lead concentration ranging from 50–250 …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 20–25 Read article
-
Particle Size Effect on the Physicochemical Parameters of Water Media in Treatment of Contaminants of AGO and PMS
Abstract: Some of the physicochemical properties of contaminated water media with AGO and PMS was monitored upon the particle size effect and mix ratio. The physiochemical parameters monitored are potassium ammonia, iron and manganese concentration upon the performance of the formulated adsorbent immersed in the salt water and fresh water medium. The investigation demonstrates the occurrence of leaching in the process, which shows that some of the parameters adsorbed by the …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 27–36 Read article