Search
71 articles for “ANOVA”
-
A Study on Fracture Sem Analysis by Optimization of FSW When a Composite Material Al 6061 Mixed with Fly Ash is Done with Cooper Using Anova Method
Abstract: The current study aims to examine how different parameters in friction stir spot welding influence hardness and tensile strength, while identifying the most suitable parameter combinations to enhance the overall quality of the fabricated components. The experimental work involves joining dissimilar materials, where one specimen consists of Aluminum alloy 6061 reinforced with 10% fly ash, and the other is a copper alloy. Various process conditions are altered during testing to …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 1–5 Read article
-
An Approach on Optimization of Thermo Physical Properties of Teak Wood Dust Filled Polymeric Composites
Abstract: The aim of the present work was to prepare the specimens with the help of hand-lay-up technique to measure the thermal properties of TWDPC. The density & voids of TWDPC were measured to determine its physical property & significantly affected some of its mechanical properties. Taguchi experimental method was applied to optimize its thermal properties. The optimal factor combinations were determined with the help of ANOM & the analysis of …
Published in Journal of Polymer & Composites Read article
-
Experimental Investigation on Mechanical Characterization of Electrodeposited Shot Peened Copper Coated and Un-Coated Mild Steel
Abstract: The fatigue strength of fabricated copper coating on mild steel specimens under repeated loading and the overall number of cycles to failure has been investigated. The specimens of copper coating on mild steel substrate are fabricated by using an electro deposition shot peening method. The hardness behaviour of fabricated specimens studied and the experimental work has been carried out by using Vickers Micro Hardness under the load of 20N force. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 279–288 Read article
-
Optimization of Machining Parameters of EN-27 Material Using Wire Electric Discharge Machining (WEDM)
Abstract: The optimization of Wire Electrical Discharge Machining (WEDM) parameters for EN-27 alloy steel, a high-strength material widely utilized in mechanical and structural applications, is the subject of this study's methodical analysis. Due to its hardness and poor machinability by conventional methods, WEDM is preferred for achieving precise dimensional accuracy and surface integrity. The primary objective of this work is to enhance machining performance by identifying optimal process parameters influencing Material …
Published in Journal of Production Research & Management · Vol. 16, Issue 1, 2026 · pp. 32–36 Read article
-
Structure–Property Correlation of Infill Topology and Density on Tensile and Flexural Performance of FDM-Printed PLA and ABS
Abstract: Additive Manufacturing (AM), particularly Fused Deposition Modeling (FDM), has become a widely adopted manufacturing technology due to its design flexibility, low cost, and capability for rapid prototyping. However, the mechanical performance of FDM-printed components is strongly influenced by internal structural parameters such as infill pattern and infill density, in addition to the intrinsic material behaviour. This study investigates the structure–property relationship between infill topology, density, and mechanical performance of PLA …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 26–37 Read article
-
Parametric optimization of residual stress of TiO2 composite coating
Abstract: The primary objective was to develop a composite coating by utilizing the HVOF thermal spray technique and including TiO2. The substrate was covered with a high-quality composite layer utilizing the HVOF coating process. The TiO2-based powder and carbon powder were initially combined in the mixer for deposition. The composite powders were applied via an HVOF torch, namely the PT F4 model. The firearm frequently produces a high-speed flow of extremely …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 295–301 Read article
-
An Experimental Investigation on Surface Roughness of Laser Beam Machining of Aluminium Alloy
Abstract: Laser beam machining (LBM) is a cutting-edge technique widely utilized for precision machining of advanced materials. This experimental investigation focuses on the surface roughness of aluminum alloy (Al 6061) during LBM. The study systematically examines the impact of process parameters such as laser power, cutting speed, and gas pressure on surface roughness (Ra). The significance of surface roughness in determining the quality and functionality of machined components is emphasized. The …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 82–104 Read article
-
Effect of Drilling Process Parameters on Surface Roughness of LM6/B4C/Fly Ash Hybrid Composites
Abstract: This research seeks to assess the effect of process variables such as feed rate (FR), spindle speed (SS), drill material (DM) and reinforcement (R%) on surface roughness (SR) when drilling LM6/B4C/Fly ash hybrid composites. The stir casting process was used to fabricate the LM6/B4C/Flyash hybrid composites utilizing LM6 aluminum alloy as the matrix material and B4C/Fly ash as strengthening materials. Experiments were carried out using an L18 orthogonal array (OA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 898–906 Read article
-
Drilling Parameters Optimization in LM6/B4C/Fly ash Hybrid Composites by Taguchi Technique
Abstract: Aluminium matrix composites (AMCs) are challenging to machine due to its abrasive characteristics. Because of the broad adoption of MMCs, it is vital to create sufficient equipment to facilitate efficient manufacturing. The current study utilizes signal-to-noise ratio (S/N) analysis to determine the ideal machining parameters for drilling AMC’s. The goal with this study is to investigate the effect of feed rate (FR), drill type (D), speed (SS), reinforcing material R …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 890–897 Read article
-
A Review on Parametric Optimization of WEDM Technique for OHNS Steel
Abstract: In this study, the Wire Electrical Discharge Machining (WEDM) process for OHNS (Oil Hardened Non-Shrinking) steel, a high-performance material frequently used in the production of dies, punches, and precision tooling components, is optimized parametrically and validated experimentally. A continuously moving wire electrode and a sequence of electrical discharges are used in WEDM, a non-traditional machining method, to erode material and produce intricate and precise profiles, particularly in materials that are …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 29–35 Read article
-
Effect of 3D Printing Process Parameters on the Tensile Strength of Polylactic Acid (PLA)
Abstract: This study employs the Taguchi approach to systematically analyze and optimize critical Fused Deposition Modeling (FDM) parameters, focusing on their effect on the tensile strength of 3D-printed Polylactic Acid (PLA) components. The study explores three levels of layer thickness (0.15 mm, 0.25 mm, and 0.3 mm), infill densities (25%, 50%, and 75%), and nozzle temperatures (200°C, 205°C, and 210°C) across three infill patterns: Triangular, Gyroid, and Zig-zag. A total of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 128–140 Read article
-
Integrated Optimization of Solar Photovoltaic Systems Using Taguchi Method and Computational Fluid Dynamics for Enhanced Efficiency
Abstract: The transition to renewable energy demands efficient and reliable photovoltaic (PV) systems to meet rising global energy needs. This study presents an integrated optimization framework combining the Taguchi method and Computational Fluid Dynamics (CFD) to improve the thermal and electrical performance of solar PV systems. A structured experimental design using an L9 orthogonal array evaluates the influence of three key parameters—material type, panel thickness, and cooling mechanism—on system efficiency. Analysis …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 3, 2025 · pp. 10–25 Read article
-
Exploring Gelatin Film an Eco-Friendly Biomaterial: Synthesis, Characterization, and Environmental Applications
Abstract: This study explores the synthesis, characterization, and application of eco-friendly gelatin films, a sustainable and biodegradable biopolymer alternative to synthetic plastics. Synthesized via solution casting and characterized by UV-Vis spectroscopy, FTIR, and TGA, these films demonstrated excellent molecular integrity and thickness-dependent properties, with higher gelatin concentrations leading to thicker films and delayed solubility. The research highlights their significant potential in removing diverse environmental pollutants, including dyes (methylene blue, methyl orange), …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 1–16 Read article
-
Design and Simulation of Forging Die Towards Improving Life of Closed Die
Abstract: Forging is the metal forming process which is used for forming complex shaped component with geometrical accuracy. More than fifty percent of the forgings are processed through this way. Forged components required in many engineering sectors, most of them in the automotive sector. The majority of the safety critical component and load bearing structural components are process through it. By using forging process production of complex component is faster with …
Published in Journal of VLSI Design Tools and Technology Read article
-
Optimizing Manufacturing Processes with Taguchi Method in Production Engineering
Abstract: The Taguchi Method, pioneered by Genichi Taguchi, stands as a powerful optimization tool within the realm of production engineering. This paper delves into the principles, applications, and significance of the Taguchi Method in enhancing manufacturing processes. With a focus on minimizing variation and improving performance, this methodology plays a crucial role in addressing challenges faced by industries in their pursuit of operational excellence. The core components of the Taguchi Method, …
Published in International Journal of Robotics and Automation in Mechanics · Vol. 1, Issue 2, 2023 · pp. 1–8 Read article
-
Application of Artificial intelligence in Single Point Incremental Forming for Surface Roughness Prediction
Abstract: The sheet metal forming industries always try to find an emerging trend to form sheet-metal in a cost-effective manner. In this regard, a forming technique is trending termed as single point incremental forming (SPIF) in which a simple forming tool having hemispherical end rod is moving and simultaneously deforming the clamped metal sheet according to predetermined toolpath command and forms a complete shape. The achievement of required surface quality is …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 237–246 Read article
-
Experimental Findings of the EDM Process Parameters for Metal Matrix Composites
Abstract: The process of electrical discharge machining (EDM) shapes hard metals and creates intricately formed, deep holes in a variety of electro-conductive materials by arc erosion. With regard to material removal rate (MRR) in metal matrix composite EDM, this study intends to examine the impacts of operational factors. The material removal rate generated is used to assess the efficacy of the metal matrix composite EDM process. It has been noted that …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 14–18 Read article
-
An Experimental Investigation of Machining Parameters on Aluminum Composites
Abstract: The need for a material with good mechanical, thermal, and wear resistant properties is satisfied by aluminum composite. However, the biggest obstacle to substituting it with alternative materials is the machining challenges. For this kind of hard-to-cut material, electric discharge machining is a very efficient method. Thus, using a Taguchi-based method, an attempt has been made to determine the most advantageous amount of input parameters for EDM of Al composite. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 8–13 Read article
-
Experimental Study of Roughness Analysis of AISI 316L Material using Fiber and CO2 LBM
Abstract: Laser beam machines have gained significant attention as a precise and versatile method for cutting and shaping materials in various industries. This study investigates the surface roughness characteristics of SS 316L, a commonly used stainless steel, when subjected to laser beam machining using both fiber and CO2 laser sources. The aim of this research is to compare the effects of these two laser types on the final surface finish of …
Published in International Journal of Solid State Innovations & Research · Vol. 2, Issue 2, 2024 · pp. 12–21 Read article
-
Development and evaluation of multigrain pasta
Abstract: Pasta is one of the most consumed food among the food products prepared from cereals due to low cost, ease in preparation along with pleasant textural and sensory characteristics. This study was performed to prepare multigrain pasta by utilising the numerous health benefits of wheat, chickpea, kodo and ragi flour. Each ingredient was selected according to unique nutritional attributes which will be incorporated in pasta to make it more nutritious …
Published in International Journal of Nutritions · Vol. 2, Issue 2, 2025 · pp. 34–47 Read article