Search
1901 articles for “pro/engineer”
-
Analysis and Design for Homogeneous Earth Slopes
Abstract: In an aspect of geotechnical engineering problems, slope stability is a condition of inclined soil, waste heaps to withstand or undergo movement. The slope is an unprotected ground surface that can be situated at an angle of horizontal. Slopes are necessitated in the construction of railway embankments and highways, levees, bridges, earth dams, reservoirs and canals, etc., and are generally less expansive. Failures of natural and man-made slopes have demise …
Published in Journal of Geotechnical Engineering · Vol. 6, Issue 3, 2019 · pp. 41–46 Read article
-
Role of Cement and Fly Ash in Soil Stabilization
Abstract: Soil stabilization changes the engineering properties of soil and produces strength and stability. Use of industrial wastes and manufactured materials in soil stabilization can be cost effective and environmental friendly. As there is a growth of habitations surrounding the PSIT campus, therefore, soil samples collected from this area were analyzed for its plasticity index properties. It was found that soils of this area come under low plastic category. Hence, the …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 3, 2020 · pp. 1–8 Read article
-
Experimental Investigation of Self-Compacting Concrete Using Coir Fiber
Abstract: Concrete is the construction material widely used throughout the world. Construction materials used in the industry should be friendly with the environment during their usage. Self-compacting concrete (SCC) is an innovative concrete that does not require vibration for placing and compaction. It is able to flow under its own weight, completely filling formwork and achieving full compaction, even in the presence of congested reinforcement. The hardened concrete is dense, homogenous …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 6–12 Read article
-
Effect of pH on Shear Strength Behavior of Granular Soil
Abstract: In this research, the performances of pH value on shear strength behavior of granular soil have been studied. The shear strength of soil is an important term in most of the foundation engineering problems such as the bearing capacity of shallow foundation, slope stability of dam/embankment and lateral earth pressure on retaining walls. A series of direct shear tests were conducted on two types of dry granular soils (taken from …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 8–11 Read article
-
Experimental Investigation of EAFS Aggregate Concrete by Partially Replacing Cement with Single Blended SCMs Fly Ash, GGBS and UGGBS for Sustainable Concrete
Abstract: This study represents research work on the effect of electric arc furnace slag (EAFS) aggregate containing concrete with the utilization of different secondary cementitious materials (SCMs) in single blending, which is the extension of our previous work to optimize EAFS aggregate in concrete. We found 50% EAFS aggregate replacement performance comparatively better as compared to natural aggregate. A total of 12 concrete mixes were cast in different single blended SCMs …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 28–35 Read article
-
EVALUATING THE EFFECT OF SNAIL SHELL ASH AS A FILLER IN HOT MIX ASPHALT
Abstract: Filler play an important role in engineering properties of bituminous paving mixes. Conventional, cement, lime and stone done are used as fillers. In this study, an attempt has been made to access the effect of a non-conventional filler (snail shell ash) experimental procedure was adopted using Marshall Stability method to analyze the following parameter. Stability, flow, void in mineral aggregate, void in mix and void filled with bitumen. The filler …
Published in Trends in Transport Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 1–11 Read article
-
Screening of Cold-Active Lipase from Psychotropic Fungi
Abstract: Lipase is a class of enzymes that catalyze as, hydrolysis of long-chain tri-glycoside and comprise the large significant group of bio-catalysts for biotechnological applications. Currently, the cold-active lipases (CLPS) are the enzyme of choice for pharmacists, organic chemists, biochemical, biophysicists and engineering processes, bio-technologists and micro-biologists as well as biochemists. The production of CLPs is mostly existed from psychrophilic microorganisms. Psychrophiles and psychrotrophs extracellular colds-active enzymes at low temperature (cold) …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 8, Issue 3, 2018 · pp. 1–5 Read article
-
Risk Management in Civil Engineering by FTA, FMEA and Risk Matrix
Abstract: Infrastructure projects, particularly in civil engineering, are fraught with uncertainties that manifest as both physical and financial risks. The project report, titled Quantifying and Managing Financial and Physical Risks in Infrastructure Projects, aims to bridge the existing gap between managing these two critical categories of risks. By integrating advanced statistical methodologies such as Failure Mode and Effects Analysis (FMEA), Fault Tree Analysis (FTA), Risk Matrix, and Regression Analysis, this study …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 34–46 Read article
-
RCCI Engine: Performance and Emission Testing Using Biodiesel
Abstract: With dwindling fossil fuel reserves and rising energy demands, the need for renewable alternatives is more critical than ever. This study explores the potential of Karanja biodiesel, a fuel derived from Karanja oil, as a sustainable replacement for diesel in RCCI engines. Karanja biodiesel offers several advantages. It's renewable, reduces dependence on fossil fuels, and produces lower emissions compared to traditional diesel. This research investigates how Karanja biodiesel blends impact …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 30–41 Read article
-
Effects of Oil Extraction Methods on Bio-diesel Production from Wild Grape Seeds: A Case Study of Soxhlet Extraction and Mechanical Press Engine Driven Expeller Methods
Abstract: In this research, two samples of wild grape seeds (Lannea Microcarpa) were used to produce biodiesel. The first sample was washed; dried and powdered, oil was extracted from the sample using soxhlet extraction method with n-hexane as solvent. The second sample was washed and dried, oil was extracted from the sample using mechanical press engine driven expeller. The oil yield from the first method was 33.3% while the oil yield …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 6, Issue 1, 2015 · pp. 35–40 Read article
-
Emission Analysis Of Butanol and Waste Cooking Oil in VCR Diesel Engine
Abstract: Environmental pollution and depleting energy resources are two major reasons to find a suitable alternative fuel. The experimental study is carried out on a variable compression ratio engine to compare the emissions produced by the engine using the blends of waste cooking oil and that of butanol, separately with the emissions produced by the same engine using neat diesel on the different compression ratio and loads. The blends were prepared …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 86–90 Read article
-
Review in Friction Stud Welding Of Aluminium to Steel
Abstract: The demand for friction stud welded aluminum/steel joints has increased in many significant applications including cryogenics, structural engineering, spacecraft, rocket fuel tanks and high vacuum chambers owing to their superior properties. In automobile engineering, there is a requirement to join a mild steel earthing pin which is in the shape of a stud to an aluminum car body. Aluminum and steel was considered to join using friction stud welding. This …
Published in Journal of Thermal Engineering and Applications · Vol. 8, Issue 3, 2021 · pp. 19–24 Read article
-
Evaluation of Building Foundations: A Structural Engineering Perspective
Abstract: This study focuses on the comprehensive assessment and design of building foundations, emphasizing the critical relationship between structural loads and soil properties. The depth of the foundation is determined by analyzing the load exerted on the column and the soil's bearing capacity, both of which play a pivotal role in ensuring stability. Similarly, the foundation base size is calculated based on these parameters to ensure it effectively transfers the load …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 6–18 Read article
-
Implementation of Laplace Transform in Various Science and Engineering Field and Relation of Laplace Transform with Z-Transform
Abstract: In this paper, applications of Laplace Transform and Z-transform in different science and engineering fields have been analyzed. The applications of Laplace Transform are useful in various areas of electrical engineering, control engineering, physics, signal processing, automation engineering. Z-transform is used to convert discrete time domain signal into discrete frequency domain signal. It has wide range of applications in mathematics and digital signal processing. It is mainly used to analyze …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 36–40 Read article
-
Stabilization of Reinforced Earth Wall Backfill Using Steel Slag and Recycled PET Fiber: A Composite Material Approach
Abstract: Reinforced Earth (RE) walls are widely used in infrastructure due to their structural efficiency and ease of construction. However, they typically require high-quality granular backfill, which may not be readily available or cost-effective in many regions. This study investigates the potential of utilizing locally available sandy clay soil stabilized with industrial and plastic waste materials specifically 20% steel slag and 0.75% shredded polyethylene terephthalate (PET) fibers, as an alternative backfill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 110–127 Read article
-
A Study and Performance Evaluation of Evolutionary Optimization Techniques for Multi-objective Master Production Scheduling Problems
Abstract: Master production schedule (MPS) can effectively and efficiently synchronize the operations in any organization. MPS, which is posed as one of the multi-objective parameter optimization problems, is a plan that determines optimal values of products to be produced. For many engineering optimization problems, more competitive and optimal solutions can be obtained by using Heuristic evolutionary optimization algorithms. Among these, two main algorithms considered here are the differential evolution (DE) whose …
Published in Journal of Production Research & Management · Vol. 3, Issue 2, 2013 · pp. 12–22 Read article
-
Evaluation of Mechanical Properties of Hybrid Fibers in Concrete
Abstract: Engineering Cementitious Composites (ECC) is an advanced growing method to increase the longevity of the structure in all behaviour aspects. ECC consist of cement, fine aggregate, fiber and water.High performance, ductility and durability of cementitious matrix can be achieved by addition of fiber. Nowadays, the member of fibers play a vital role to increase the overall structural behaviour of concrete matrix. In that, synthetic-based fibers are used in various applications. …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 1–5 Read article
-
Assessment of Approval Process and Government Policies: Special Approach for Combating Building Collapse in Nigeria
Abstract: Adequate synergy among clients, government agencies, structural engineers, regulatory bodies, stakeholders, and allied professionals in building industry is imperative for combating incidence of building collapse in Nigeria. This study examined the supervision responsibilities of professionals, construction management and challenges of building inspectors in selected local governments in south western Nigeria. Literatures, media, systematic sampling technique and structured interview guide were used for collection of data. Data gathered were analyzed and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 11, Issue 2, 2021 · pp. 29–36 Read article
-
Engineered Polymer Composites for Non-Surgical Lip Posture Correction in Facial Paralysis
Abstract: Facial paralysis presents significant functional and aesthetic challenges, particularly through lip posture deficits such as drooping and drooling, often inadequately addressed by traditional surgical or drug-based interventions, especially in debilitated patients. This study explores the application of engineered polymer composites in a novel, non-surgical lip posture corrector designed to statically suspend and correct lip position without requiring surgical or dental support. The device utilizes a precisely formulated blend of polymethylmethacrylate …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 Read article
-
Sustainable Water Management in Engineering: Identifying Causes and Implementing Solutions
Abstract: Water is a vital resource in engineering applications, underpinning processes in manufacturing, construction, power generation, and environmental systems. Unsustainable water consumption and waste, however, present serious problems, such as resource depletion, environmental damage, and higher operating expenses. This paper explores the causes of water waste in the engineering sector, such as inefficient processes, aging infrastructure, and inadequate wastewater management, alongside the impacts on economic performance and ecological balance. To address …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 9–26 Read article