Search
242 articles for “SEM analysis”
-
Wettability and Physiothermal Analysis of Silver-Reinforced Eggshell-Derived Hydroxyapatite Based Biocomposite
Abstract: Hydroxyapatite (HAp), a biocompatible ceramic material, has garnered significant interest in medical applications due to its natural bone type replica. The current study investigates the physical, wettability, and thermal properties of a novel HAp derived from eggshell waste and reinforced with silver nanoparticles at 0.0, 0.1, 0.2 and 0.5 weight % concentration using chemical precipitation method and termed as HAP0.0Ag, HAP0.1Ag, HAP0.2Ag and HAP0.5Ag respectively. As observed, the Fourier transform …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 300–314 Read article
-
Experimental and Polynomial Regression Modelling of Tensile Characteristics of Hybrid Jute/Hemp Fiber Composites
Abstract: The present study aims to develop hybrid jute-hemp fiber/epoxy composites by the hand lay-up process with 60% of fiber reinforcement and 40 % of matrix ratio. To measure the change of tensile properties, prepared hybrid composites were tested for normal tensile strength and edge notch tensile (ENT) test as per the ASTM standards. Findings show that, developed composites with reported tensile strength followed by comparing it with fracture toughness. Experimentally, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 47–58 Read article
-
Synthesis of YSZ nanopowders by using PVA-metallic nitrate combustion method
Abstract: Yttria-stabilized zirconia (8YSZ) powder is widely used as a thermal barrier coatings material for various aeronautical gas turbine engine components and structures operating in high temperature environment as well as for the nozzle of solid rocket engine due to its relatively high thermal expansion coefficient, thermal reflectivity, low thermal and good corrosion resistance. The synthesis of single or composite metal oxides by combustion of metal-polyvinyl alcohol gel precursors (Me-PVA) has …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 24–32 Read article
-
Next-Generation Conductive Polymer Composites for Flexible and Wearable Electronics
Abstract: The rising demand for flexible and wearable electronics has accelerated research into conductive polymer composites (CPCs) due to their lightweight nature, electrical conductivity, and mechanical flexibility. Despite significant advancements, challenges such as reduced conductivity under mechanical deformation and limited durability persist. This study aims to develop next-generation CPCs with enhanced conductivity, flexibility, and self-healing capabilities. Hybrid nanofillers—graphene, carbon nanotubes (CNTs), and silver nanowires (AgNWs)—were incorporated into bio-based conductive polymers through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 550–566 Read article
-
Synergistic Integration of MEMS and Spintronics for Precision Data Analytics in Cheminformatics
Abstract: The transformational potential of merging spintronics and Micro-Electromechanical Systems (MEMS) technologies in cheminformatics is investigated in this work. Recent advancements in MEMS, particularly through the use of microbeam sensors and accelerometers, enhance the precision of data collection and processing, especially in biomedical applications such as drug delivery systems and chemical sensing. The synchronization of oscillations in MEMS devices leads to improved reliability and data accuracy, enabling the development of sophisticated …
Published in International Journal of Cheminformatics · Vol. 2, Issue 1, 2024 · pp. 20–26 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
India’s Traditional Medicine Trade (2015–2024): Trends, Regulatory Landscape, and Policy Directions for Sustainable Growth
Abstract: India is a major global supplier of traditional medicine products – including Ayurvedic, Unani, Siddha, homeopathic, and other herbal and plant-based formulations – yet exports continue to face challenges arising from regulatory divergence, heterogeneous quality-control requirements across markets, and raw-material supply constraints linked to biodiversity pressure and fragmented value chains. This paper systematically analyzes India’s import-export patterns for traditional medicine between 2015 and 2024, maps the regulatory landscape (DGFT, Drugs, …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 13, Issue 1, 2026 · pp. 13–18 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
Quantum Mechanics: Revolutionizing Pharmaceutical Sciences
Abstract: Quantum physics and pharmacy have generally been regarded as distinct areas—one investigates the microlevel behavior of non-living matter while the other concentrates on intricate biological systems. Nevertheless, progress in life sciences has increasingly depended on molecular-level insights, whereas quantum physics has advanced beyond basic principles to impact real-world uses. This intersection provides new opportunities for, pharmacy. Quantum entanglement, which allows for instantaneous relationships between particles, can be utilized for secure …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 12, Issue 1, 2025 · pp. 72–77 Read article
-
Self-Healing Polymeric Composites Reinforced with Green Synthesized Nanoparticles
Abstract: The development of sustainable self-healing polymeric materials is critical for enhancing durability and service life in advanced engineering applications. In this study, zinc oxide (ZnO), magnesium oxide (MgO), and ferric oxide (Fe₂O₃) nanoparticles were green-synthesized using Allium cepa extract and incorporated into epoxy-based polymeric composites to improve mechanical, thermal, and self-healing properties. This bio-based synthesis is eco-friendly and safe alternative to harsh chemical techniques, utilizing natural antioxidants to stabilize the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 305–314 Read article
-
Multifunctional and Photocatalytic Properties of DyFeO₃/Dy₃Fe₅O₁₂ Biphasic Nanoparticles
Abstract: Rare-earth orthoferrites constitute a class of compounds that exhibit remarkable magnetic, optical, and electronic properties across a wide temperature range. In the present study, a dysprosium-based orthoferrite containing dual phases of DyFeO₃ perovskite and Dy₃Fe₅O₁₂ garnet was successfully synthesized via the co-precipitation technique. X-ray diffraction (XRD) analysis was employed to investigate the structural configuration of the synthesized material. The diffraction pattern confirmed the formation of a biphasic composite comprising orthorhombic …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 41–54 Read article
-
Mechanical & Tribological Characterization of Al2024-Alumina-Graphite Reinforced Monolithic and Hybrid Composites
Abstract: This work investigates the mechanical characteristics of Al2024-Al2O3-Graphite reinforced monolithic and hybrid composites fabricated by the stir casting method. Exploratory work involved the fabrication of monolithic composites with varying Al2O3 contents (5-8 wt%) and hybrid composites with the ratios of Al2O3 (2-6 wt%) and Graphite (1-3 wt%) in matrix Al2024. For improving their dispersion, preheated reinforcement particles were introduced in matrix alloy at controlled stirring rates. A homogeneous particle distribution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 823–836 Read article
-
Parametric Study of Laser Drilling Process Using Multi Variable Regression Analysis
Abstract: The laser drilling process is an advanced manufacturing technique extensively employed for intricate and high-value components in aerospace, automotive, and electronics industries. Laser drilling technology offers opportunities to meet the contemporary demands of industries using a broad spectrum of engineering materials. However, this process encounters several engineering challenges such as thermal damage, dimensional inaccuracies, and the formation of a recast layer in the drilled components. This study focuses on examining …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1000–1015 Read article
-
Influence of Gd Doping in Structural, Morphological and Optical Properties of Zno Nanostructures Synthesised Via Sol-Gel Processes
Abstract: In this study, nanocrystalline Zn1-xGdx (x=0.0 and 0.03) samples were synthesised via the Sol-gel combustion process. An array of analytical techniques was employed to examine the prepared samples to determine their different physical features. For both pristine and Gd-doped samples, the crystal symmetry is hexagonal with the P63mc space group which is verified via the Rietveld refinement analysis of X-ray diffraction (XRD) data. The atoms' bond length Zn-O and bond …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 219–225 Read article
-
Microstructural and Mechanical characterization of Brass and Bronze alloys
Abstract: Brass, a copper and zinc alloy, is renowned for its malleability and resistance to corrosion, which makes it perfect for musical instruments and plumbing. Aluminium bronze, containing copper and aluminium, offers superior strength and wear resistance, commonly used in marine and industrial applications for its durability and corrosion resistance. This study aimed to compare the micro and macro structural characteristics of brass and aluminium bronze alloys. The microstructures of these …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 2, 2024 · pp. 28–37 Read article
-
Mechanical and Morphological Analysis of Jute/Manila Hemp Hybrid Composites for Enhanced Structural Performance
Abstract: Natural fiber composites are renowned for their lightweight, strength, corrosion resistance, and high strength-to-weight ratio, often surpassing traditional metals. Despite challenges such as poor fiber-matrix adhesion and moisture susceptibility, hybridizing composites present a viable solution by enabling tailored properties for optimal performance. This study investigates hand-lay-up processed natural fiber composites, specifically woven jute/epoxy, non-woven manila hemp/epoxy, and their hybrid variants. Extensive testing was conducted on mechanical properties including hardness, flexural …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 1–11 Read article
-
Generative AI for VR: Creating Physically Realistic Models
Abstract: Virtual Reality has revolutionized the traditional learning system by creating and interactive and engaging environment. However, its ability to show precise real-world experiences is limited due to lack of physical realism. This study investigates the potential of Generative Adversarial Network (GAN) in creating physically realistic 3D models. Proposed system incorporates deep learning techniques along with physics-based constraints to enhance model’s accuracy and usability. To achieve this, experiments were conducted on …
Published in Journal of Advancements in Robotics · Vol. 12, Issue 3, 2025 · pp. 14–22 Read article
-
Integration of Semi-Interpenetrating Polymer Networks and Quantum Dot–Polymer Nanocomposites for Low-Cost, Flexible OLED Display
Abstract: Flexible OLED displays need advanced material systems to integrate capabilities for mechanical flexibility as well as thermal stability and environmental durability at low costs. Semi-interpenetrating polymer networks (SIPNs) combined with quantum dot (QD)-polymer nanocomposites serve to improve OLED performance capabilities. They combine a stable structural design along with a flexible matrix through the matrix capabilities of SIPNs which result in efficient luminescence and pure color output courtesy of CdSe/ZnS QDs …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 919–932 Read article
-
Hybrid Polymer Nanocomposites with Enhanced Dielectric and Optical Properties for Wireless Communication Systems
Abstract: The incorporation of nanofillers into polymer matrices offers a promising approach to enhancing the multifunctional properties of composite materials. This study examines the effect of nanofiller concentration on the dielectric performance, mechanical strength, thermal stability, optical absorbance, and electromagnetic interference (EMI) shielding effectiveness of polyvinylidene fluoride (PVDF)-based nanocomposites. Titanium dioxide (TiO₂) and zinc oxide (ZnO) nanofillers were incorporated at varying concentrations to assess their influence on material properties. EMI shielding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 518–549 Read article
-
Material Characterization Analysis of Fiber Reinforced Composites
Abstract: The study investigates the physical characteristics of PAN carbon fabric/epoxy composite which is a material commonly utilized in aerospace, defense, and automotive sectors. The material has exceptional mechanical properties like high specific strength and hardness. The materials utilized in this experiment are T-300 PAN carbon fabric, LY556 Epoxy resin, and HY5200 hardener to create pre-preg materials. Then the laminate was pre- pregged in a die mold of identical shape matched, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 230–243 Read article