Search
245 articles for “Fractures”
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
An AI-Driven IoT Framework for Autonomous Quality Assurance in Optical Lens Manufacturing
Abstract: The evolution of high-precision optics—ranging from smartphone micro-lenses to high-end astronomical glass—demands unprecedented accuracy in manufacturing. Traditional inspection methods, reliant on manual sampling or static automated optical inspection (AOI), often fail to bridge the gap between high-speed production and the detection of microscopic surface aberrations. This paper introduces an integrated architecture combining the Internet of Things (IoT) and Deep Learning-based decision-making systems to revolutionize lens quality control. By deploying an …
Published in International Journal of Optical Innovations & Research · Vol. 4, Issue 1, 2026 · pp. 36–41 Read article
-
Interfacial Performance and Structural Stability of Repaired vs. Replaced Polymer-Based Composites: A 3-Year Retrospective Analysis of 'Patch-up' Restorative Engineering
Abstract: Objective: This retrospective study aimed to evaluate the clinical longevity and interfacial success of repairing aged polymer-based composites versus complete replacement, focusing on the integration between the existing polymer matrix and the new restorative material. Materials and Methods: A retrospective clinical audit was conducted on 50 cases (n = 50) of posterior restorations with localized defects. The sample was categorized into: Group A (n = 25), where defective sites were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 180–187 Read article
-
Structure–Property Correlation of Infill Topology and Density on Tensile and Flexural Performance of FDM-Printed PLA and ABS
Abstract: Additive Manufacturing (AM), particularly Fused Deposition Modeling (FDM), has become a widely adopted manufacturing technology due to its design flexibility, low cost, and capability for rapid prototyping. However, the mechanical performance of FDM-printed components is strongly influenced by internal structural parameters such as infill pattern and infill density, in addition to the intrinsic material behaviour. This study investigates the structure–property relationship between infill topology, density, and mechanical performance of PLA …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 26–37 Read article
-
Comprehensive Review of the Fundamental and Functional Properties of Crystalline Materials
Abstract: Crystalline materials, characterized by their highly ordered atomic arrangements, serve as the backbone of modern engineering and technology. This review provides a detailed examination of their diverse properties, categorized into mechanical, thermal, electrical, and optical domains. We analyze fundamental mechanical parameters such as the elastic modulus, yield strength, and fracture toughness, alongside functional behaviors like fatigue and creep. The discussion extends to thermal transport and expansion, electrical conductivity and resistivity, …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 1, 2026 · pp. 20–24 Read article
-
Enhanced Mechanical Properties of AZ31 Magnesium Alloy Composite Reinforced with Carbon Nanotubes and Nano hydroxyapatite
Abstract: Magnesium alloys represent a novel category of biodegradable materials, offering numerous advantages in addressing the limitations associated with conventional biomedical materials. Magnesium-based metallic biomaterials offer a promising solution for fixing fractures, ensuring effective treatment without the inconvenience of subsequent implant removal procedures. In the present work, AZ31 Mg-alloy was chosen as the base material. Five specimens were meticulously fabricated, each varying in weight percentages of reinforcement materials: 0wt%, 0.5wt%, 1wt%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 206–217 Read article
-
Effect of Silicon Carbide Filler on Mechanical and Damping Behavior of Basalt/Stainless Steel Hybrid Laminated Composites
Abstract: This study consolidates three experimental investigations on hybrid laminated composites reinforced with basalt fibre, stainless steel (SS) wire mesh, and silicon carbide (SiC) filler using vacuum infusion moulding. Three laminates were fabricated with filler variations of 0%, 1.5%, and 3% by weight of matrix material, maintaining a stacking sequence of [0B/0W/45B/0W/0B/45W]s with a thickness of 4–5 mm. The first investigation focused on impact strength. Drop-weight impact testing revealed a steady …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 367–385 Read article
-
Managed Pressure Drilling for Improved Well Control: A Cross-Case Comparative Study (2015–2025)
Abstract: Managed Pressure Drilling (MPD) has matured over the past decade from a specialist technique applied to challenging wells into a mainstream drilling capability spanning ultra-HPHT exploration, deepwater development, unconventional tight-gas multi-well campaigns, and naturally fractured sour-gas reservoirs. Despite this maturation, the operational question of which MPD variant should be applied to a given well has been addressed in the literature case-by-case rather than through structured comparative synthesis. This paper presents …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 07–12 Read article
-
Self-Healing Structural Polymer Composites Incorporating Bio-Inspired Nanofillers
Abstract: Self-healing polymer composites become an attractive family of intelligent materials that are capable of autonomously repairing damage, which will enhance their durability, reliability and service life in extreme engineering applications. The materials are based on the principles of nature, using the nanofillers that are derived from biological systems to improve mechanical properties and self-healing capabilities by utilizing hierarchical structures and multifunctional interface interactions. The recent developments on the formulation of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Ultrasonic Dispersion of Halloysite Nanotubes for Enhanced Mechanical, Thermal, and Morphological Performance of Epoxy Composites
Abstract: Halloysite nanotube (HNT)-reinforced epoxy nanocomposites were prepared by mixing HNT with bisphenol-A epoxy (LY 556) using ultrasonication, followed by compression molding. HNT contents of 0–5 wt.% were used. The composites were evaluated for tensile strength, flexural strength, Shore D hardness, Izod impact strength, and thermal stability using thermogravimetric analysis (TGA). The fractured tensile surfaces were also examined to understand the failure mechanism and interaction between HNT and the epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 212–226 Read article
-
Numerical and Experimental Investigation on I-type Damage Evolution in Glass Fiber Reinforced Laminates Subjected to Quasi Static Loading
Abstract: Glass fiber reinforced polymer composites has become more popular material used in aerospace and marine structural applications due to their specific strength and anti-corrosion properties. The present work discusses the numerical and experimental investigation on I-type damage evaluation in glass fiber reinforced laminates under quasi-static loading is presented. Three volume fraction of glass and resin (40/60, 50/50 and 60/40) plies were selected for both numerical and experimental damage analysis. The …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 3, 2017 · pp. 27–33 Read article
-
A Review study on Deep Drawing Analysis of Sheet Metal with Different Materials
Abstract: Deep drawing is one of the maximum vital processes for forming metal steel components.It is widely used for mass manufacturing of cup shapes in car, aerospace and packaging industries. In deep drawing metallic sheet is subjected to high punch stress which causes deformation of material, throughout deformation stresses are generated in numerous zones, which leads to numerous defects. The most important failure modes in sheet metallic elements are wrinkling and …
Published in Journal of Automobile Engineering and Applications · Vol. 5, Issue 2, 2018 · pp. 47–53 Read article
-
Experimental Investigation on Hybrid Laminated Composites Reinforced with Basalt-Pineapple-Bamboo Fibers
Abstract: In the majority of technological applications, particularly in automotive and building materials, natural fibre-reinforced composites are now more common. Natural fibre developments have seen a tremendous rise in demand recently. As a filler material, Snail Shell Powder was utilized in the current work to evaluate the mechanical and thermal characteristics of hybrid reinforced composites constructed from natural fibres such as basalt, pineapple, and bamboo. Snail shell powder weighed six grams …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 3, 2023 · pp. 9–15 Read article
-
Impact of water-cement ratio and cement content on pore area percentage and chloride diffusion – A molecular dynamics study
Abstract: The exposure of a reinforced structure to water-based settings leads to the occurrence of chloride-induced corrosion, resulting in a reduction in both the durability and performance of the structure. The entry of chloride ions into concrete and the pore area percentage is influenced by several elements, including the degree of humidity, the presence of fractures, environmental conditions, water-to-cement ratio (w/c ratio), and cement content. This research focuses on the utilization …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 3, 2023 · pp. 37–45 Read article
-
Crack Initiation, Propagation and Stress Intensity Factor of Rectangular Plate with Circular Hole by FEA Approach
Abstract: The study of crack behavior in a plate with hole is a considerable importance in the design to avoid the failure. This situation has a look at offers with investigation of stress intensity factor, von-mises stress (ϭ von-mises) at the finite center cracked plate subjected to uniform tensile loading depends at the assumptions of linear elastic fracture mechanics (LEFM) and plane strain problem. The stress intensity factors mode I (KI) …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 3, 2020 · pp. 13–36 Read article
-
Study on the Mechanical Properties of Additively Manufactured Metallic Structures
Abstract: A revolutionary technology that has made it possible to produce intricate metallic structures with customized mechanical properties is additive manufacturing, or AM. An extensive analysis of the mechanical properties of metallic components made using additive manufacturing processesis presented in this paper. The study explores how material choice, post-processing techniques, and process parameters affect the mechanical behavior of AM metallic structures. By examining tensile strength, fatigue characteristics, hardness, ductility, impact resistance, …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 3, 2023 · pp. 1–6 Read article
-
Geotechnical and Geophysical investigations for a foundation underpinning solution in a residential building with differential settlements, in Asti Province (central Piedmont), NW Italy
Abstract: Foundation differential settlements are a recurrent topic for antique and no so antique buildings, for this particular case, an integrated approach of geotechnical and geophysical investigation was developed to provide information and support to the engineering design for the restoration of a building.Given the presence of widespread and pervasive wall fractures, compromising the static nature of the building, investigating the nature of the subsoil in depth was a need, in …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 3, 2023 · pp. 1–12 Read article
-
Probable Causes of Cracks on selected Buildings at Akrowa in Afigya Kwabre District, Ghana
Abstract: This work evaluated the nature of the foundation soils and cracks on twelve representative buildings at Akrowa, in the Afigya Kwabre District near Kumasi in Ghana. Age, material used whether clay/concrete, dimensions of cracks on the buildings and tests for geotechnical parameters of foundation soils such as moisture content, bulk density, specific gravity, particle size distribution, Atterberg limit and direct shear were carried out on soils from four pits dug …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 3, 2023 · pp. 29–39 Read article
-
A Review on Current Status of Biodegradable Surgical Implant Materials
Abstract: Since many years, inert metals such as stainless steel, cobalt-chromium and titanium alloys have been the primary biomaterials used for load bearing applications. In order to these metallic implants such as pins, screws and plates for repairing the defects have to be removed by secondary surgery once the bone tissue is healed, which will increase the morbidity, pain and cost. Hence conventional metallic biomaterials are biocompatible but not biodegradable. At …
Published in Journal of Instrumentation Technology & Innovations · Vol. 10, Issue 3, 2020 · pp. 5–15 Read article