Search
195 articles for “Crystal”
-
Characterization of Polyurethane at Multiple Scales for Erosion Mechanisms Under Sand Particle Impact
Abstract: Thin polyurethane layers have been widely used as erosion-resistant coatings on helicopter rotor blades such as UH-60 Black Hawk and Eurocopter SA 315. Published research has mainly focused on empirical studies that relate the mechanical properties such as rebound resilience and hardness of polyurethane to solid particle erosion resistance. However, polyurethane possesses phase mixing at multiple scales and thus sand particle erosion resistance depends also on the microstructure and the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 1–13 Read article
-
Combustion Synthesis and Comprehensive Characterization of Pure and Ni-Doped CuFe₂O₄ Nanoparticles for Functional Composite Applications
Abstract: The CuFe2-xNixO4 (x = 0, 0.1, 0.3, and 0.5) nanoparticles were synthesized using a combustion method and comprehensively characterized to understand their suitability for polymer-based composite applications. X-ray diffraction confirmed the formation of a single-phase spinel ferrite structure with crystallite sizes of 20–30 nm. Energy-dispersive X-ray spectroscopy verified the successful incorporation of Ni ions into the CuFe₂O₄ lattice, while FE-SEM analysis revealed uniformly dispersed nanoscale particles desirable for composite reinforcement. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Activated Carbon Materials as Ideal Adsorbents for the Desulfurization of Fossil Fuels
Abstract: Removal of organosulfur compounds from diesel is of interest from scientific, social, economic, and environmental viewpoints. Production of clean fuel remains a primary goal of the petroleum refining industry. The reduction of sulfur content below stringent ppm levels in diesel fuels becomesincreasingly challenging due to the presence of sterically hindered sulfur compounds, such as 4,6- dialkyldibenzothiophenes, which are resistant to removal over conventional supported mixed sulfide hydrodesulfurization catalysts. Consequently, alternative …
Published in International Journal of Pollution: Prevention & Control · Vol. 4, Issue 1, 2026 · pp. 28–34 Read article
-
Turning the Properties of Wastes Paper-Derived Cellulose Nanocrystals for Enhanced Erythromycin Adsorption
Abstract: This study explores the modification, characterization, and adsorption performance of waste paper-derived cellulose nanocrystals (CNCs) for the removal of erythromycin from aqueous solutions. CNCs were modified using organic acid, inorganic acid, and base treatments, and their structural changes were evaluated using FTIR, XRD, and BET analysis. FTIR confirmed the introduction of carboxyl and hydroxyl groups in acid-treated CNCs and deprotonation effects in base-treated CNCs. XRD analysis revealed that organic acid …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 1–24 Read article
-
Synthesis of Graphene-CeO2 Nanocomposite with Enhanced Electrochemical Properties
Abstract: For the fabrication of graphene–cerium oxide (CeO₂G) composites, 99 mg of cerium oxide (CeO₂, 99.9%) was uniformly dispersed in 100 mL of deionized water via ultra-sonication (40 kHz) to achieve a stable suspension, followed by the incorporation of 1 mg of synthesized graphene. The resulting mixture was maintained at ambient temperature (25 ± 2 °C) under continuous magnetic stirring at 500 rpm for 2 h to promote effective interfacial interaction …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1355–1373 Read article
-
Design and Simulation of Solar Powered Semi-Automatic Grass Cutter
Abstract: The maintenance of large area of grass lawns has always been a tedious task considering continuous human labour and long hours of work. Inorder to reduce the fatigue human work a novel design of automated grass cutting machine powered with a solar panel is designed and simulated for remote operated functioning. The mechanism works with the skeletal frame of a normal grass cutting machine face lifted with ultrasonic sensor for …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 17–24 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
Implement Explainable Machine Learning to Improve Conductivity in Polymer-CNT Nanocomposites: Supporting Adaptive, Flexible, and Long-Lasting IoT Wrap-Around Electronics Applications
Abstract: The rapid growth of Internet of Things (IoT) technologies requires electronic components that are adaptable, lightweight, and durable, and that can continue to function well in diverse contexts and circumstances. Polymer–carbon nanotube (CNT) nanocomposites have become interesting choices for these kinds of uses because they are more flexible, conduct electricity better, and can be made to fit specific needs. However, improving conductivity in these heterogeneous systems remains a major challenge …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 238–254 Read article
-
Analysis of Ageing and Degradation Behavior of Polyamide-12 for Sustainable Additive Manufacturing
Abstract: Additive Manufacturing (AM), particularly High-Speed Sintering (HSS), has emerged as a transformative technology capable of producing complex thermoplastic parts with high efficiency and minimal material waste. The HSS process involves selective deposition of radiation-absorbing ink followed by infrared heating to consolidate polymer powders-most commonly polyamide-12 (PA12). While PA12 is widely used due to its excellent thermal stability and mechanical properties, the sustainability of HSS strongly depends on the reuse of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 136–154 Read article
-
Influence of SlS Parameters on Strength and Fatigue Durability of Polyamide-12
Abstract: Selective Laser Sintering (SLS), a laser-based polymer powder bed fusion process, has gained prominence in the fabrication of high-performance thermoplastics such as Polyamide-12 (PA12). This paper provides an extensive review of how key SLS process parameters—such as laser power, scan speed, hatch spacing, and energy density—affect the mechanical properties of PA12 components, with a specific focus on tensile strength and fatigue resistance. Studies demonstrate that increasing energy input enhances particle …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 178–191 Read article
-
Green Synthesis and Functional Evaluation of Ag–Polypyrrole/TeO2 Nanocomposites for Advanced Electronic Applications
Abstract: Ag–PPy/TeO₂ nanocomposites with TeO₂ loadings ranging from 2% to 10% were synthesized using an in-situ chemical polymerization method. Green tea extract, rich in phytochemicals, acted as both a reducing and stabilizing agent to facilitate the formation of metal oxide nanoparticles. The structural and morphological characteristics of the nanocomposites were analyzed using FTIR, PXRD, and SEM techniques. FTIR confirmed the successful integration of Ag, TeO₂, and PPy functional groups. PXRD patterns …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 64–76 Read article
-
Gamma Irradiation Effects on Structural and Optical Properties of PVA/Al₂O₃/TiC Polymer Nanocomposites for Optoelectronic Applications
Abstract: PVA/TiC/Al2O3 nanocomposite (PTA) films were successfully prepared via the solution casting method. The impact of high-dose gamma (γ) irradiation (30 kGy) on the structural and optical properties of PVA/TiC/Al2O3 nanocomposites was systematically explored using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and UV–Visible spectroscopy. XRD analysis confirmed the semi-crystalline nature of the nanocomposites, which was found to decrease upon incorporation of Al₂O₃ nanoparticles and exposure to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 717–729 Read article
-
High-Performance Carbon Nanotube-Reinforced Biodegradable Polymer Composites for Packaging
Abstract: The growing issues concerning the properties of petroleum-based plastics on the environment increased the demand for biodegradable alternatives and polylactic acid (PLA) is one of the most promising options available. However, its poor toughness, thermal resistance, and barrier properties limit broader applications in sustainable packaging. This study reports the fabrication and characterization of PLA-based nanocomposites reinforced with carbon nanotubes (CNTs) at varying loadings (0.1-2 wt.%). Structural analysis (FTIR, XRD) confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 183–194 Read article
-
Applications of Nanomaterials in Membrane Separation for Effluent Treatment in the Textile Industry
Abstract: The textile industry makes a significant contribution to economic growth. As the global population continues to increase exponentially, production rates are also on the rise to meet this growing demand. Unfortunately, this surge in production often leads to noncompliance with environmental regulations. While the textile industry supports economic development, it also contributes to serious pollution. Various dyes, such as azo dyes, Congo Red (CR), Crystal Violet, methylene blue, and methyl …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 1–8 Read article
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article
-
Water Chestnut Stem-Derived Biochar Supported AgNPs/AC-CTS-PVA Composite Gel for Wastewater Treatment and Potent Antibacterial Performance
Abstract: In the present study, green and efficient Ag-NPs functionalized activated carbon/chitosan-polyvinyl alcohol (AgNPs/AC-CTS-PVA) composite gel was successfully synthesized using water chestnut stem-derived biochar for wastewater treatment and antibacterial applications. The composite was characterized by FTIR, XRD, SEM-EDX, and TGA analyses, confirming the successful incorporation of crystalline Ag nanoparticles within the polymeric matrix and improved thermal stability. The material was tested regarding the removal of the dye of methylene blue (MB) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1129–1144 Read article
-
Review on Severe Plastic Deformation Techniques for Bulk Materials: Deformation Behavior and Properties
Abstract: This paper presents a detailed review of the efficient application of Severe Plastic Deformation for the fabrication of ultra-fine-grained and nanostructured crystalline bulk materials. Severe Plastic Deformation allows substantial grain refinement while largely preserving the original dimensions of the workpiece, making it especially suitable for ductile materials capable of sustaining very high strains under elevated hydrostatic pressure prior to failure. The study investigates the grain refinement mechanisms involved in Severe …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 40–72 Read article
-
Petrographic and Geochemical Characteristics of Deccan Trap Basalts from Belagavi, Karnataka, India
Abstract: The Deccan Trap volcanic province represents one of the largest continental flood basalt provinces in the world and provides significant insights into magma generation and evolution processes. The present study focuses on the petrography and geochemistry of basalts from the Belagavi region, which forms part of the southern extension of the Deccan volcanic province. Petrographic analysis of thin sections reveals that the basalts are mainly composed of plagioclase feldspar and …
Published in International Journal of Minerals · Vol. 3, Issue 1, 2026 · pp. 52–61 Read article
-
Development and Characterization of a Solid Dispersion of an Anti-Diabetic Drug Using Pectin as a Natural Polymer
Abstract: Aim: The current study sought to improve the solubility and oral bioavailability of gliclazide by creating solid dispersions and oral dispersible tablets (ODTs) with enhanced physicochemical characteristics and maintained antidiabetic action. Methods: Preformulation studies were conducted to evaluate the physicochemical properties of gliclazide, including physical appearance, melting point, solubility, and partition coefficient. Solid dispersions were prepared using hydrophilic carriers-pectin and PVP K30, and subsequently characterized by Fourier Transform Infrared Spectroscopy …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 17, Issue 2, 2026 Read article
-
Valorization of Human and Cattle Dental Waste into Functional Composite Biomaterials: A Detailed Comparative Analysis
Abstract: This study investigates the conversion of human and cattle (goat and cow) teeth into bioactive hydroxyapatite-based composites and presents a detailed comparative evaluation of these biogenic materials with laboratory-synthesised (synthetic) hydroxyapatite (HAp). In this work, hydroxyapatite was extracted from human and bovine teeth through controlled calcination and milling, while synthetic HAp was prepared using a standard wet chemical precipitation route. All materials were subsequently sintered at 900 °C and fabricated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 340–354 Read article