Search
381 articles for “flexural”
-
Development of Chilli Pedicle Powder Fiber Reinforced with Palmyra Sprouts for Sustainable Biodegradable Composites and Its Mechanical Characterization
Abstract: The current research study aimed to present the development and mechanical characterization of a novel biodegradable composite material, Chilli Pedicle Powder fiber reinforced with Palmyra sprouts, which might be of significant importance to replace conventionally used synthetic fibers from nature in an eco-friendly way. With rising global needs in sustainable materials in multiple industries, like automotive, construction, and packaging industries, it was required to find an alternative biodegradable source that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 433–441 Read article
-
Soil Stabilized Road
Abstract: This research examines the suitability of soil-stabilized roadways for light vehicular movement, offering an economical and practical alternative for areas with limited infrastructure development. Stabilizing soil involves improving its engineering properties by incorporating additives such as cement, lime, or other binding materials. Through stabilization, the treated soil can achieve a compressive strength of approximately 5 N/mm², or 500 tonnes per square meter (t/m²), which is sufficient to support loads imposed …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 38–42 Read article
-
Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance
Abstract: This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products. In this research, standard …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 73–84 Read article
-
Mechanical Analysis and Advanced Manufacturing of Eco-Friendly Groundnut Shell Powder Reinforced Epoxy Composites
Abstract: Polymer composites reinforced with natural materials are gaining significant attention because of their eco-friendly nature, cost-effectiveness, and favorable mechanical properties. This research explores the creation and mechanical analysis of epoxy composites strengthened with groundnut shell powder (GSP), exploring both untreated and benzoyl chloride-treated GSP variations. The research emphasizes utilizing agricultural waste material while achieving enhanced mechanical properties through surface modification and advanced fabrication techniques. The composites were manufactured using the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 174–185 Read article
-
Investigation of Mechanical Properties of Hollow Bricks Incorporating Aerated Aggregates: A Polymer-Cement Composite Approach
Abstract: The rapid advancement of construction technologies has necessitated the development of lightweight, thermally efficient, and sustainable building materials. Hollow bricks, due to their inherent voids, offer substantial reductions in dead load and enhanced insulation properties. However, their mechanical performance often falls short when compared to conventional solid bricks. To address this limitation, this study explores the synergistic integration of aerated aggregates and polymer-cement composites (PCCs) in hollow brick production. Aerated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 92–105 Read article
-
Mechanical Characteristic Analysis of Five-Layer Carbon-Carbon Composite Material
Abstract: The current study investigates the fabrication and mechanical strength of five-layer carbon-carbon composite. The strong five-layer carbon-carbon composite material with high strength and modulus is made of a raw material called precursors. The polyacrylonitrile (PAN) method is used in the fabrication of carbon fiber. The characteristics of the resulting carbon material depend on the composition and structure of the precursor. A sheet of 50 x 40 cm five-layer carbon-carbon composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 405–417 Read article
-
Evaluation of Mechanical Properties of Terminalia Chebula and Teak Wood Sawdust Reinforced Polymer Hybrid Composites
Abstract: This study examines the mechanical characteristics of polymer hybrid composites augmented with sawdust from teak wood and Terminalia chebula (Kadukkai). To examine their effects on mechanical performance, the composites were made with different percentages of biofiller (10%, 20%, 30%, 40%, and 50%) while keeping the proportions of the two reinforcements same. Tensile, flexural, and impact tests were performed to assess their strength properties. The findings showed that flexural strength varied …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 469–476 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
An Experimental Investigation of Polyethylene Terephthalate Fibers in the Properties of Concrete
Abstract: In India near about every year 45 million tons of solid waste is generated. The solid waste rate is increasing of 1.5 to 2% every year. In that total solid waste, Plastics contains 12.3% waste generated in which most common are the water bottles. Now the present worldwide situation, the production of PET (Polyethylene Terephthalate) exceeds 6.9 million tons per year. So that it is necessary to reusing of PET …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1063–1072 Read article
-
Optimizing Mechanical Properties of Polypropylene Fibre-Reinforced Coconut Shell Concrete
Abstract: This study investigates the impact of polypropylene (PP) fibre reinforcement on the mechanical properties of coconut shell (CS) concrete. The compressive strength of CS concrete is primarily governed by the strength of CS aggregates, with early-age failure attributed to poor bonding and later-stage failure influenced by aggregate strength. The incorporation of PP fibres significantly enhanced compressive, tensile, and flexural strength. At 28 days, compressive strength increased by 1.2–3.45% in CSF …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 6–12 Read article
-
Strength Enhancement of Concrete with Nano-Based Admixtures
Abstract: The integration of advanced nanomaterials such as nano-silica and nano-clay has emerged as a highly promising and innovative technique to significantly enhance the mechanical characteristics and long-term durability of conventional concrete. In this comprehensive study, the effects of nano-modification on various concrete properties, including workability, compressive strength, split tensile strength, and flexural behavior, were thoroughly evaluated through a systematic experimental program. A series of concrete mix designs incorporating varying proportions …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Enhancement of Mechanical Properties in Hemp Fiber-Reinforced Epoxy Composites Using Graphene Nanoplatelets
Abstract: This study investigates how incorporating graphene nanoplatelets (GNPs) influences the mechanical performance of hemp fiber–reinforced epoxy composites. Hemp fibers were chemically treated by alkali treatment to improve fiber–matrix adhesion owing to their high specific strength, stiffness, renewability, and environmental friendliness. Graphene nanoplatelets were dispersed in acetone by probe sonication and added to acetone epoxy matrix at a concentration of 0.5 wt% and 1.0 wt%, respectively. Composite laminates were prepared by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 98–109 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Mechanical and Sustainable Enhancement of Epoxy Composites using Tamarind Seed Powder
Abstract: The investigation examines how tamarind seed powder affects epoxy-based materials for the development of waste-based useful products. The research examines the mechanical behavior of epoxy resin composites which contain tamarind seed powder in increasing percentages spanning from 10% to 40%. The team utilized the hand layup method to produce the composites which then fulfilled the ASTM guidelines for specimen fabrication for mechanical tests. The study examined fundamental mechanical parameters by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 797–806 Read article
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article
-
Performance Evaluation of PET Strip Fiber Reinforced Concrete
Abstract: Polyethylene Terephthalate, commonly known as PET, is a petroleum-based plastic polymer that is widely used in the packaging of various commodities due to its durability, and poses a major threat to the environment. To tackle this scenario, the construction industry is researching all possibilities to incorporate this waste into concrete and enhance the properties of concrete. The present study evaluates the performance characteristics of M 30 grade concrete when reinforced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1076–1088 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Evaluation of Mechanical Properties of Arecanut Fiber Reinforced Epoxy Composite
Abstract: This study investigates the mechanical performance of arecanut fiber-reinforced epoxy composites, aiming to evaluate their potential for sustainable industrial applications. Arecanut husk fibers, an agricultural waste product, were selected for their natural abundance and biodegradability. To enhance fiber-matrix bonding, the fibers were chemically treated with sodium hydroxide (NaOH), which effectively removes lignin, hemicellulose, and other impurities, improving surface roughness and interfacial adhesion. The treated fibers were then incorporated into an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 389–400 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article