Search
228 articles for “chlorides”
-
Performance Evaluation of Green Walnut Husk Waste Extract for Inhibiting Aluminium 8088 Corrosion in Acidic Solution
Abstract: The cumulative call for environmental and supportable corrosion inhibitors has obsessed curiosity in exploiting plant-based agronomic surplus resources. Presented research work discovers the corrosion inhibition probable of green walnut husk extract(GWH)—a normal and plentiful agro-waste—on Aluminium 8088 alloy in an acidic medium. Aluminium 8088, however identified for its corrosion resistance, is vulnerable to squalor in highly acidic settings, affectation trials in several industrial claims. GWH extract act as an ecologically …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 45–59 Read article
-
Experimental and Numerical Investigation of Corrosion-Induced Failures in Copper-Tin Alloy (Cu-Sn) and Aluminum-Magnesium Alloy (Al-Mg) Connectors: A Stress–Corrosion Coupling Analysis
Abstract: The utilization of an integrated experimental and finite element modelling (FEM) methodology, this study investigates the degradation and failure mechanisms in polymer composite electrical connectors exposed to aggressive environmental conditions. Epoxy- and polyamide-based composites, reinforced with carbon and glass fibers, were subjected to accelerated salt spray and humidity–temperature cycles to simulate prolonged outdoor exposure. Electrochemical and environmental aging experiments revealed that chloride ions and moisture ingress were responsible for matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 366–379 Read article
-
Investigating the Influence of Process Parameters on Photochemical Machining of Phosphor Bronze Alloy Microchannels
Abstract: Microchannels are widely employed in microfluidic devices, biomedical systems, and compact heat exchangers, where their functional efficiency depends strongly on surface finish, dimensional control, and edge quality. Traditional machining techniques often face limitations in producing such features with the required precision, prompting the use of advanced micromachining methods. In the present work, photochemical machining (PCM) has been applied to fabricate serpentine-shaped microchannels in phosphor bronze. The study systematically investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 837–846 Read article
-
Synthesis and Spectral Characterization of Complexes Tin(II) With 4-Nitrophenol
Abstract: Tin(II)4-nitrophenoxide complexes with the formulas SnCl(OC₆H₄NO₂-4) and Sn(OC₆H₄NO₂-4)₂ were prepared through the reaction of stannous chloride (SnCl₂) with 4-nitrophenol (HOC₆H₄NO₂-4) in 1:1 and 1:2 molar ratios, respectively. The reaction was performed in tetrahydrofuran (THF) with diethylamine serving as the base. The resulting compounds were characterized through elemental analysis, determination of molecular weight, molar conductance measurements, and spectroscopic methods including IR and ¹H NMR spectroscopy. Current investigations are directed toward assessing …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 22–26 Read article
-
Nitrosamine Accumulation, Processing Variables, and Indigenous Plant Inhibitors in Nigerian Traditionally Processed Meats
Abstract: N-nitrosamines are classified as probable or possible human carcinogens by the International Agency for Research on Cancer. Carcinogenic N-nitrosamines — principally N-nitrosodimethylamine (NDMA) and N-nitrosodiethylamine (NDEA) — are formed in abundance during the preparation of widely consumed Nigerian traditional processed meats including suya, kilishi, and balangu. This original investigation combined a six geopolitical zone of Nigerian market survey with laboratory-controlled model system experiments, effects of processing parameters on N-Nitrosamine formation …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 61–72 Read article
-
Influence of Agricultural Waste Materials in Concrete: A Sustainable Approach
Abstract: Urbanization and resource depletion have intensified the need for sustainable alternatives to traditional construction materials. The concrete industry, a major contributor to environmental issues due to cement production, is turning to waste materials to mitigate its impact. This review paper focuses on the use of agricultural waste as a partial replacement for cement and aggregates in high-strength concrete (HSC), with an emphasis on its influence on both fresh and hardened …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 26–32 Read article
-
Sustainable Polymer-Based Cementitious Composites with Granite Dust as Fine Aggregate: Strength and Durability Evaluation
Abstract: This study investigates the potential for creating a new kind of cementitious composites that is obtained through the different compositions of rocks and chemicals in which granite dust that is helpful in resistance of chloride penetration and heat of hydration as a substitution with sand in composite. The primary goal of this study focuses on the effect of the stone waste like polymer matrix on evidence bases of researches for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 325–339 Read article
-
Review on the Effects of Chemical Compounds Toxicity on Workers in Chemical Laboratories.
Abstract: Chemical laboratories are considered high-risk work environments due to the wide range of chemicals that workers handle, which may be toxic, corrosive, or flammable. Improper handling of these substances can lead to serious health problems, ranging from mild irritation to death in cases of exposure to chemical compounds such as phenols and amines, which cause various types of lung and laryngeal cancers and respiratory diseases in laboratory workers who are …
Published in International Journal of Toxins and Toxics · Vol. 3, Issue 2, 2026 · pp. 17–26 Read article
-
pH-Responsive Smart Polymer Nanocomposites for Anti-Corrosive Coatings
Abstract: Metallic corrosion under adverse marine and industrial conditions imposes gigantic financial burdens and risks worldwide. Conventional waterproofing waterborne epoxy has passive barrier protection, but is also inherently microporous, lacking intrinsic repair ability against mechanical damage and thus rapidly decays. This is a critical gap that this work tries to bridge by designing a new pH-responsive hybrid polymer nanocomposite by using polyethyleneimine-tannic acid-cerium functionalized boron nitrate nanosheets with chitosan-capped mesoporous silica …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 201–213 Read article
-
Effect of Surface Modification on Properties of Kevlar/Epoxy Polymer Composites
Abstract: In this study, a high-performance Kevlar/epoxy polymer composite was prepared using a hand lay-up technique. The Kevlar fiber was treated with calcium chloride/ethanol solution (CaCl2/EtOH) to enhance the interfacial interaction between the fiber and the epoxy matrix. The optimization of fiber surface treatment and fiber content for the best tensile strength (TS) of Kevlar/epoxy polymer composite was achieved using Box-Behnken design (BBD) through response surface methodology (RSM). Three parameters: CaCl2 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 35–46 Read article
-
Chitosan polymer and composites Hydrogels: An Emerging Approach for Microplastic Elimination from Water
Abstract: Hydrogel is a polymer network which can retain huge volumes of water but still retains its shape because of its special chemical formula. Recently, hydrogels have become an object of great interest for environmental remediation due to the possibility of controlling their physicochemical properties in the case of removal of microplastics. The current work reviews and analyzes the efficiency of application of conventional coagulation systems based on chitosan and new …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Investigation of Characteristics of Vernonia amygdalina Stem on Remediation of Crude Oil Polluted Loamy Soil Environment
Abstract: The effectiveness of Vernonia amygdalina in Total Petroleum Hydrocarbon (TPH) mitigation in a loamy soil environment was monitored using mixture of 100ml of Crude oil, 2kg of loamy soil and 25g to 100g of remediant determined. The experiment was set-up based on the design concept considered as presented in this research, which involved constant volume of 100ml of crude oil, constant mass of 2kg of loamy and changes in mass …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 2, 2023 · pp. 23–30 Read article
-
Experimental Study on Corrosion of Steel in Coarse Aggregate Medium
Abstract: AbstractThere are many practical situations were steel exposed to coarse aggregate. Deterioration of steel in such case it depends upon the nature of coarse aggregate, especially the types and the concentration of ions present in the moisture within the coarse aggregate since coarse aggregate vary in nature it is necessary to understand the nature of corrosion of steel in each samples of coarse aggregate. This aspect was taken for the …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 9, Issue 2, 2018 · pp. 69–76 Read article
-
Ru(III)-Catalyzed Oxidative Cleavage of Ritodrine Hydrochloride: A Kinetic and Mechanistic Study
Abstract: A systematic kinetic and mechanistic study of the oxidation of ritodrine hydrochloride (RTH) with chloramine-T (CAT) in both HClO4 and NaOH media has been carried out at 303 K. In acid medium, the reaction rate is very sluggish to be measured kinetically. Ruthenium (III) chloride ([Ru(III)]) was found to be an efficient catalyst. The reaction rate exhibits a first-order dependence on [CAT]0 in both media. It shows a fractional-order on …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 1, 2014 · pp. 29–40 Read article
-
Integration of Photo-catalysis of Ultraviolet Rays for Chlorination Process of Methane Conversion into Mono-, Di-, Tri- and Tetra-Chloromethane
Abstract: Alkanes the most basic of all organic compounds undergo very few reactions due to its stability. One of the reactions is halogenation, or the substitution of single hydrogen on the alkane for a single halogen to form a haloalkanes. Example of this halogenation of alkanes is the chlorination processes. It is well established that methane-chlorine mixture undergoes substitution reaction at the temp of about 400ºC and presence of light without …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 3, 2020 · pp. 8–10 Read article
-
Adsorption, Process Technology with Catalysis
Abstract: Surface of solids assumes a significant part in numerous physical and synthetic peculiarities. There are two principle purposes behind this exceptional job. First and foremost, the outer layer of a substance interfaces first with its environmental factors. Furthermore, the surface particles are in an alternate state as looked at to the atoms in the inside of the strong. The surface atoms interface all the more promptly with different substances which …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 3, 2021 · pp. 7–14 Read article
-
Diagnosis and Repair of Deteriorated Concrete Structures
Abstract: In India, we come across many old buildings needing major repairs or go early in to a state of dilapidation condition to make them unfit for occupation.The premature deterioration of structure is an economic burden not only on owners but also to the municipalities’ and nation as a whole. The longer life of structures enables better utilization of natural resources. Reduction in waste due to demolition enhances energy conservation. Such …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 1, 2013 · pp. 7–12 Read article
-
Effect of Silica Fume in High-performance Selfcompacting Concrete with Conplast SP430
Abstract: Concrete is a construction material used worldwide since ages. Self-compacting concrete is that type of concrete which is firstly being developed in Japan in early 1990s and is capable to flow under its own weight and completely fill the formwork, without vibration effect, and cohesive enough to be handled without segregation and bleeding. Self-compacting concrete is known to be new class of high-performance concrete which is used to facilitate and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 11, Issue 2, 2021 · pp. 12–18 Read article
-
Enhancing Blended Concrete Characteristics: A Comprehensive Review of GGBS and Steel Slag Effects from Performance and Sustainable Perspectives
Abstract: Avinash Kumar1, *, Sanjeev Kumar Verma2 Abstract Blended concrete, incorporating supplementary cementitious materials (SCMs), has gained significant attention in the construction industry due to its potential to improve concrete properties and promote sustainability. This review article provides an extensive examination of how two commonly utilized Supplementary Cementitious Materials (SCMs), namely Ground Granulated Blast Furnace Slag (GGBS) and Steel Slag, impact the properties of blended concrete. The review aims to provide …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 2, 2023 · pp. 26–32 Read article
-
Effect on Mechanical Properties of Concrete Using Industrial Waste
Abstract: Waste management is a great challenge for any country in current and future aspect. Solid waste generates from different industry i.e. stone, marble, coal, tire etc. are major issues in India. These wastes create major environmental & health problems for surrounding people. This study represents the utilization of waste kota stone slurry and marble powder as sand & cement replacing material with 15% fly ash of class-C. Waste kota stone …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 2, 2023 · pp. 19–25 Read article