Search
418 articles for “Wireless System”
-
Vector Arrow Shape Microstrip Antenna for WiMAX Application
Abstract: AbstractIn this paper dual band microstrip patch antenna is presented which is used for personal communication system and wireless local area network. The two bands which ranges are 1.721-2.031 GHz with bandwidth of 16.53% and 2.964-3.202 GHz with bandwidth of 7.72%. The glass epoxy material is used as a substrate to design anticipated antenna and simulated with IE3D Zeland software. The simulation results like reflection coefficient, VSWR and smith chart …
Published in Journal of Electronic Design Technology · Vol. 8, Issue 3, 2017 · pp. 30–33 Read article
-
Microstrip Planar Broadband Yagi-Uda Antenna for X-Band Communication
Abstract: In this paper, a planar Yagi-Uda antenna based on classic Yagi-Uda dipole antenna is accessible which is very useful for microwave wireless applications. This antenna provides relatively high gain and more directive radiation pattern at X frequency band with proper impedance matching. This antenna has been developed at supporting dielectric constant of 4.4, supported substrate thickness of 1.6 mm and loss tangent of 0.02. The proposed antenna is completely compatible …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 60–63 Read article
-
A Review On : Arduino Obstacle Avoiding Car With Voice And Bluetooth Control
Abstract: This paper provides an alternative design of obstacle avoidance and voice control for automotive devices. Future advancements in this technology will benefit us forpeople with disabilities who are unable to drive on their own, for transportation purposes, in hazardous environments where human interaction is not possible, security against civilian and military personnel to potential terrorist attacks etc. This paper aims to design a flexible and cost-effective wireless automation system using …
Published in Journal of Mechatronics and Automation · Vol. 9, Issue 3, 2022 · pp. 5–13 Read article
-
Textile Antenna with Partial Ground for Multiband Applications
Abstract: AbstractIn this article, the dominant textile antenna is presented. The proposed antenna has various applications like satellite communication, military and medical applications. The proposed antenna gives dual frequency bands with bandwidth from 8.96 to 14.456 GHz with 46.73% and second band from 14.98 to 17.46 GHz with 15.289. The intended textile antenna is applicable for wireless communication systems as it has wide dual bandwidth and high directivity of 6.379 dBi.Keywords: …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 3, 2017 · pp. 15–18 Read article
-
An Overview of Elliptical Low Pass Filter by using Defected Ground Structure Method
Abstract: Calculation and differentiation of the response of elliptical low pass filter (LPF) with and without using defected ground structure (DGS) was done. In the present work, return loss, bandwidth and gain have been evaluated. All the designs are printed on the FR4 lossy substrate of dielectric constant ( ) of 4.3, substrate thickness of 1.6 mm and loss tangent of 0.02. Moreover, the effect of controlling parameters namely slots and …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 2, 2017 · pp. 13–16 Read article
-
UWB Band Pass Filter Using Dielectric Resonator
Abstract: A novel ultra-wideband (UWB) bandpass filter is proposed and implemented using a dielectric resonator, with aim of transmitting the signals in the whole UWB passband of 3.1–10.6 GHz. Ultra-wideband (UWB) is a promising innovation for some remote applications because of its expansive transfer speed, great proportion of transmission information and low power cost. The filter is compact in size with a great simplicity in assembly and integration. The developed UWB …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 3, 2016 · pp. 25–29 Read article
-
Triple Band PIFA Antenna Using The DGS Method
Abstract: In this paper, a new design of a triple band Planner Inverted –F Antenna (PIFA) with DGS, for mobile and wireless communication systems is presented. The PIFA antenna consists of ground plate, patch antenna, feeding port and shorting plate connected to the ground plate. The designed antenna has been simulated with the help of the CST (computer Simulation Technology) software microwave studio 2010. The simulated results calculated for the resonant …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 2, 2014 · pp. 9–16 Read article
-
Gain Enhanced 2.4 GHz Slotted Rectangular Microstrip Patch Antenna with FR-4 Epoxy Substrate
Abstract: Applications that use the Internet of Things (IoT) must be combined with wireless networking technologies. This makes it easy to get to the application data. The wireless communication system is a key part of the infrastructure for the Internet of Things. It acts as a bridge for two-way connections to gather data and send control messages. In this work, HFSS software is used to create a rectangular microstrip patch antenna …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 1, 2023 · pp. 20–26 Read article
-
A New Analytical Expression of Channel Capacity with MRC Diversity Over Composite Model of α-μ/Inverse Gaussian Fading Distribution
Abstract: Abstract: Fading in a wireless communication system occurs basically due to two phenomena, multipath fading, and shadowing. A realistic scenario would comprise of both the phenomenon occurring simultaneously. Such a scenario is frequently characterized by a composite model of multipath/shadowing fading. In this work, a novel expression for the composite model of αμ/Inverse-Gaussian (IG) distribution with MRC diversity is obtained using the GaussLaguerre integration technique. Further utilizing the obtained expression …
Published in Journal of Microelectronics and Solid State Devices · Vol. 6, Issue 1, 2019 · pp. 22–29 Read article
-
WSN and IoT based Network to Monitor Freight Shipping Conditions
Abstract: AbstractWith the advancement in the technology of machine-to-machine communications and wireless sensor systems offering a unique factor for logistic companies, they can locate and track a package from its origin to destination. Additionally, they can also monitor its transportation conditions all through the journey. In today’s world freight shipping industry is booming. The proper devices are very scarce to improve the management process. The available devices are not as intelligent …
Published in Recent Trends in Sensor Research & Technology · Vol. 4, Issue 3, 2017 · pp. 8–14 Read article
-
Low profile L5 and S band Microstrip antenna for IRNSS Application Using Coxial Feed
Abstract: In recent aura, navigation is one the most demanding technology. To increase coverage, gain and bandwidth are more important of any wireless communication systems India has developed its own navigational system called IRNSS which work one two frequency band one is L5 (1.176 GHz) and second one is S band (2.482-2.502 GHz) In this paper we proposed 2 different antenna one for L5 band and second for S band antenna …
Published in Journal of Communication Engineering & Systems · Vol. 8, Issue 3, 2018 · pp. 7–17 Read article
-
BER Analysis of STBC MIMO-OFDM with ICI Cancellation
Abstract: AbstractSpace Time Block Code (STBC) Multiple Input Multiple Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) has been considered as the best technology for upcoming wireless communication systems because of its capability to transmit large data rates. But the given systems suffer from various major problems; like Carrier Frequency Offset (CFO), timing offset carrier phase noise and Intersymbol Interference (ISI) issues. In this research work, the carrier frequency offset has been …
Published in Journal of Communication Engineering & Systems · Vol. 5, Issue 3, 2015 · pp. 1–6 Read article
-
Capacity and BER Performance Analysis of Single Cell Massive MIMO with Various Precoding Techniques
Abstract: AbstractMassive Multi Input Multi Output (MIMO) is one of the promising technologies which will facilitate the 5th generation wireless communication system (5G) in the near future. It also goes by other names such as, large MIMO, hyper MIMO, full-dimension MIMO and ARGOS. In this technology the Base Station is incorporated with a large number of transmitting antennas (e.g., Hundreds, thousands). A large number of antenna help to focus the energy …
Published in Journal of Communication Engineering & Systems · Vol. 6, Issue 1, 2016 · pp. 1–14 Read article
-
IoT based Home Automation System
Abstract: The main aim of this project is to develop a wireless home automation system using an Arduino UNO, controlled by any Android OS smart phone. In this time automatic systems are being preferred over manual system. As the technology is advancing so houses are also getting smarter. IoT is the latest and fast growing internet technology to upgrade the systems. IoT is a fast growing technology in the everyday life …
Published in Journal of Microelectronics and Solid State Devices · Vol. 8, Issue 1, 2021 · pp. 31–35 Read article
-
A Comprehensive Review of CMOS Analog Circuit Design Techniques for Low-Power VLSI Systems
Abstract: CMOS analog circuit design plays a significant role in the development of modern low-power Very Large-Scale Integration (VLSI) systems used in wireless communication, biomedical devices, portable electronics, embedded systems, and Internet of Things (IoT) applications. Research on low-power CMOS analogue design methodologies has intensified because to the growing need for high-performance, small, and energy-efficient electronic products. However, reducing power consumption while maintaining signal accuracy, noise performance, stability, bandwidth, and overall …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 4, Issue 1, 2026 Read article
-
Simulation of Different Propagation Models for WiMAX channel under Different Environments
Abstract: Today the Worldwide Interoperability of Microwave Access (WiMAX) technology is gaining popularity and gaining increasing acceptance as a Broadband Wireless Access (BWA) system. It is a IEEE 802.16 standard wireless communication technology that provides high speed data over a wide area. It is a point-to-point technology for using a multi-point wireless network. It has potential success in its line of sight (LOS) and non-linear (NLOS) operating conditions under the frequency …
Published in Recent Trends in Electronics Communication Systems · Vol. 8, Issue 2, 2021 · pp. 35–45 Read article
-
Innovative Wireless Charging Solutions for Electric Vehicles
Abstract: As the automotive industry's future arises, electric vehicles (EVs) are at the forefront of zero-emission transportation technology. Although conventional plug-in charging stations are widely utilized, wireless power transfer (WPT) is an alternative. WPT may be used as either dynamic charging equipment for moving cars or static charging systems for parked cars. This study addresses the distinction between plug-in and wireless charging, the mechanics of wireless charging, various kinds of charging …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 2, Issue 1, 2024 · pp. 11–17 Read article
-
Remote Controlled Pneumatic Door Opening System
Abstract: This project is intended to design and develop a Remote-Controlled Pneumatic Door Opening System that is smart, secure, and touch-free, which is essential for the development of smart infrastructure. The system utilizes a pneumatic actuator, solenoid valves, and a wireless remote control system to effectively and efficiently open and close the door. Due to the rise in security issues, hygiene, and the need for automation in various fields, the proposed …
Published in Journal of Mechatronics and Automation · Vol. 13, Issue 2, 2026 · pp. 31–38 Read article
-
Home Automation System Using IoT
Abstract: The proposed project puts forward a systematic implementation of internet of things (IoT). Since, the technology is becoming more advanced day-by-day. Therefore, manual systems are being replaced by the automatic system. Today, the internet has become an integral part of life. The idea that devices can be controlled remotely across the world is made possible by IoT—the interconnection of devices via a global network. This paper deals with the home …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 11, Issue 1, 2023 · pp. 24–30 Read article
-
Blockchain-Enabled Secure Wireless Communication IoT Networks
Abstract: Cloud-native environments with their distributed environments and transient workloads raise the intrinsic problem of traditional intrusion detection and response systems to unprecedented levels. Modern cloud platforms have rapid elasticity, microservice orientation, and dynamic scaling, which usually exceed the range of centralized security services, contributing to the problem of slower threat detection and a poor ability to contain the threat. The proliferation of the Internet of Things (IoT) gadgets across different …
Published in International Journal of Wireless Security and Networks · Vol. 4, Issue 1, 2026 · pp. 10–14 Read article