Search
139 articles for “T-Scan system”
-
Evaluation of Polysaccharide-Based Membranes for Transdermal Drug Delivery in Chronic Pain Management
Abstract: In order to improve treatment effectiveness and patient compliance, chronic pain management is still a major challenge in modern healthcare, requiring creative medication delivery methods. The potential of polysaccharide-based membranes for transdermal drug delivery is assessed in this work, with particular attention to chitosan, alginate, and hydroxypropyl methylcellulose (HPMC). Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were two characterization techniques used to assess the membranes' physical and chemical …
Published in International Journal of Membranes · Vol. 1, Issue 2, 2024 · pp. 28–38 Read article
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article
-
Early Lung Cancer Prediction using deep Learning
Abstract: Lung cancer is a global killer because it’s often found late. Finding it early is key to treatment and survival so computer assisted diagnostics are essential. This research uses deep learning to spot early stage lung cancer from CT scans. We trained and fine-tuned three convolutional neural networks—ResNet50, Dense Net 201 and EfficientNet-B0—using transfer learning. We preprocessed the lung CT images by resizing, normalizing and augmenting them to enhance the …
Published in Research and Reviews: Journal of Oncology and Hematology · Vol. 15, Issue 2, 2026 Read article
-
Semiconducting Materials for Emerging Electronics and Technological Applications
Abstract: Semiconducting materials are important for emerging electronic and photovoltaic technologies because their structural, optical and electrical properties can be tailored for specific device applications. In this study, a TiO₂-based composite photoanode is considered as a polymer-assisted semiconducting thin-film system in which inorganic TiO₂ nanoparticles are processed with organic film-forming components to produce a porous layer for dye-sensitised solar cell application. Nanocrystalline TiO₂ nanoparticles were synthesised from titanium isopropoxide using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 36–50 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Synthesis of Zinc Oxide Nanoparticles Through Polymeric Precursor Route and their Integration into Functional Nanocomposites
Abstract: A polymer precursor approach for creating zinc oxide (ZnO) nanoparticles with regulated size and shape is described in this work. By stabilising and capping particles, the polymer-assisted pathway efficiently reduces particle agglomeration while facilitating controlled nucleation and growth. The surface shape and dispersion of the produced ZnO nanoparticles were assessed using the scanning electron microscopy (SEM). When compared to traditional synthesis techniques, the addition of polymer greatly enhanced surface homogeneity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 883–890 Read article
-
Effects of Sub-Zero Temperatures on the Viscoelastic Properties of Magnetorheological Elastomer
Abstract: Magnetorheological elastomers (MREs) are smart materials capable of tuneable stiffness and damping under applied magnetic fields. This renders the material as a promising candidate for adaptive vibration control and semi-active engineering applications. While their behaviour at elevated temperatures has been widely explored, limited attention has been given to their performance under sub-zero conditions, which are critical for cold-environment applications. As this has become an important concern, the study investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Triple-Threat Analysis: Measuring Mythril, Slither and Oyente Against Real-World Smart Contract Vulnerabilities
Abstract: Smart contracts have become fundamental building blocks of blockchain ecosystems, yet their immutable nature makes security vulnerabilities particularly devastating. This pa- per presents a comprehensive evaluation of three prominent static analysis tools—Mythril, Slither, and Oyente—for detecting vulnerabilities in Ethereum smart contracts. Through systematic experimentation with real-world contract categories (voting sys- tems, land registries, and crowdfunding platforms), we quantify the effectiveness of each tool across eight critical vulnerability types, including reentrancy, …
Published in Journal of Artificial Intelligence Research & Advances · Vol. 13, Issue 1, 2025 Read article
-
Exploration of Copper Oxide PVA/PEG Paraffin Polymer Composites for Enhanced Thermal Performance of Nano-Enhanced Phase Change Materials and Their Environmental Impact
Abstract: This study investigates the synthesis, characterization, and application of copper oxide (CuO) nanoparticles integrated into polymer-based paraffin wax composites for advanced thermal management applications. CuO nanoparticles were synthesized using a wet chemical approach and characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS), confirming their crystalline structure, morphology, and nanoscale size distribution. The synthesized nanoparticles were incorporated into polymer-supported phase change …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 156–173 Read article
-
MIRDcalc & OLINDA/EXM Dosimetry Software Analysis by SPECT/CT Scan Data of Lu-177 DOTATATE Radionuclide Therapy of NET Patients
Abstract: Accurate dosimetry is essential in nuclear medicine for optimizing radionuclide therapies and ensuring patient safety. In Radiopharmaceutical dosimetry the Medical Internal Radiation Dosimetry (MIRD)Society is the pioneer in organ-level dosimetry providing the fundamental basis for commonly used clinical and research dosimetry software like MIRDOSE and OLINDA/EXM. Recently, in MIRD Pamphlet No. 28, Part 1, the MIRD committee of the Society of Nuclear Medicine and Medical Imaging presented a new Software …
Published in Journal of Nuclear Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 48–63 Read article
-
An Experimental Study on Multi-Criteria Parameters Optimization of Process for Al6351/SiC/Gr Metal Matrix Composites Using AHP-TOPSIS Approach
Abstract: This research focuses on optimizing the process parameters of Wire Electrical Discharge Machining (WEDM) for a hybrid Metal Matrix Composite (MMC) comprising Al6351 aluminum alloy reinforced with 4% SiC and 6% graphite (Gr), fabricated via squeeze casting. This technique enables the formation of dense, defect-free composites with uniform reinforcement distribution, enhancing both mechanical properties and structural integrity. Microstructural characterization using Scanning Electron Microscopy (SEM) confirmed the even dispersion and bonding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 303–319 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
Polymer-Mediated Electron Transfer in Eco-Friendly P3HT–rGO Nanocomposites for Optoelectronic Applications
Abstract: Conducting polymer–graphene hybrid nanocomposites have emerged as promising materials for next-generation optoelectronic applications owing to their solution processability, tunable interfacial properties, and mechanical flexibility. Recent studies have highlighted the importance of graphene–polymer hybrid systems in enhancing charge transport pathways, exciton dissociation efficiency, and interfacial stability in organic optoelectronic devices. Despite these advantages, a key challenge remains the efficient production of individual graphene sheets through the reduction of graphene oxide using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 413–423 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: The nanocomposites Ag NPs-zeolite involve zeolite loaded with silver nanoparticles and have been prepared by an easy one-pot hydrothermal autoclave method. Three samples of silver-bearing zeolite were prepared for 8 hours, 6 hours, and 4 hours, respectively, inside an autoclave at 100°C. A range of characterization procedures were used to examine the samples, such as x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV-visible spectroscopy, and zeta potential. Results …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 80–90 Read article
-
Ayurvedic Approach in Case of Irritable Bowel Disease– A Case Study Highlighting the Efficacy and Safety
Abstract: Irritable bowel disease (IBD) is a common psychosomatic disorder that affects the gastrointestinal system, with symptoms that include cramping, abdominal pain, bloating, flatulence, and diarrhea or constipation, or both. If left untreated, it turns into chronic IBS. It can be controlled by adjusting the diet, changing the lifestyle. More severe symptoms include weight loss, diarrhea at night, bleeding from the rectum, anemia due to iron deficiency, unexplained vomiting, and pain …
Published in Research and Reviews : A Journal of Ayurvedic Science, Yoga and Naturopathy · Vol. 11, Issue 2, 2024 · pp. 9–13 Read article
-
Advancing Brain Tumor MRI Segmentation
Abstract: Segmentation of brain tumors in MRI scans is an integral part of neuroimaging carried out for diagnostic and therapeutic interventions. Given that manual segmentation is cumbersome and highly variable, there arises a need for automated, more precise segmentation solutions. This project, ‘Machine Learning and Deep Neural Networks to Advance Brain Tumor MRI Segmentation’ will develop a better, efficient, and accurate segmentation model to help clinicians identify brain tumors with greater …
Published in Recent Trends in Electronics Communication Systems · Vol. 12, Issue 2, 2025 · pp. 28–33 Read article
-
Revolutionizing Petrology and Mineralogy: The Study of AI and Advanced Sensor Technologies
Abstract: Petrology and mineralogy are fundamental to understanding Earth's intricate processes, from crustal evolution to economic resource formation. However, traditional methods, while precise, are often laborious, time-consuming, and occasionally subject to interpretive bias. This abstract explores the transformative potential of integrating cutting-edge Artificial Intelligence (AI) and advanced sensor technologies to revolutionize data acquisition, analysis, and interpretation in these critical geosciences. Advanced sensor technologies, including high-resolution spectral imaging (hyperspectral, Raman), automated X-ray …
Published in International Journal of Minerals · Vol. 2, Issue 2, 2025 · pp. 1–11 Read article
-
A Comprehensive Review on Nanostructured Polymer Composites for CT Imaging Contrast Enhancement in Brain Tumor Diagnosis
Abstract: The detection and characterization of brain tumors require high-resolution and non-invasive imaging modalities that have the ability of differentiating tumorous tissues and healthy brain tissues. Computed tomography (CT) can be included in this number because, in addition to providing speedy scans and penetration to deep tissue, the diagnostic capability in soft tissue organ such as the brain is poor despite low natural contrast. The review is dedicated to the emerging …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 148–162 Read article