Search
136 articles for “casting applications”
-
Experimental Study of Geopolymer Concrete in Construction of Rigid Pavement
Abstract: Geopolymer concrete is an inorganic alumino-silicate polymer. In the present experimental study of geopolymer concrete, the ground granulated blast furnace slag, fly ash, sodium hydroxide solution of molarity 14 and sodium silicate solution of molarity 14 are used to prepare geopolymer concrete mixture. The ground granulated blast furnace slag used here is taken from Jindal Steel and Power Limited, Raigarh. Different proportions of the constituents are mixed to get different …
Published in Trends in Transport Engineering and Applications · Vol. 4, Issue 2, 2017 · pp. 24–29 Read article
-
Fabrication and Analysis of Al 7075 Based Metal Matrix Composites - A Review
Abstract: Aluminium 7075 alloys are extensively used in aerospace, marine, aviation, and automotive industries due to their superior mechanical properties, high strength-to-weight ratio, and low density. However, to further enhance their performance, aluminium-7075 metal matrix composites (AMMCs) are developed by incorporating various reinforcements. This paper focuses on the influence of reinforcements on the mechanical, tribological, and corrosion behavior of AMMCs. The study examines fabrication techniques, particularly the stir casting method, which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–12 Read article
-
A Novel Technique for Improved Recovery of Mg-Analysis of the Microstructure and Physical Properties
Abstract: Aluminium-Magnesium alloys are used widely in industrial applications as well as for the preparation of metal matrix composite because of their low density and high specific strength. Magnesium has a low boiling point and the recovery of magnesium is poor when it is added in pure form particularly as cheaply available turnings to the liquid metal. Magnesium is added to aluminium for increasing its wettability and thus helping in uniformly …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 1, 2013 · pp. 1–7 Read article
-
Wear Behavior of Al-Alloy (Al-5 Mg) in-situ Reinforced TiB2 Particulate
Abstract: A research has been carried out for replacing Al monolithic alloys by aluminium (Al) based metal matrix composites (MMCs) in many engineering applications where high wear resistance and stiffness are required. In this paper, the investigated dry sliding wear behavior of TiB2 particulate reinforced composite of Al-Alloy (Al-5 Mg) is discussed. The in-situ Al-Alloy (Al-5 Mg) 10wt% TiB2 composite material were prepared by molten flux reaction synthesis using electric melting …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 32–37 Read article
-
Automotive Aluminium Advancements: Driving Efficiency and Performance in Manufacturing
Abstract: Due to the special qualities of aluminum and its alloys, aluminum is one of the most versatile materials used in engineering and construction. Its electrical and thermal characteristics are good, and it reflects light and heat well. It is highly corrosion-resistant under many service conditions. Besides, it is soft, ductile and possesses lower specific gravity. It can be cast and worked into almost any form and can be given a …
Published in International Journal of Manufacturing and Production Engineering · Vol. 1, Issue 2, 2023 · pp. 20–24 Read article
-
Background Suppression for Visual Surveillance Using SOM
Abstract: AbstractBackground suppression is widely used approach for detection of moving objects in video streams which is the first relevant step of information extraction in many computer vision applications. Aside from the intrinsic usefulness of being able to segment video streams into moving and background components, detecting moving objects provides a focus of attention for recognition, classification, and activity analysis, making these later steps more efficient. An approach based on self-organization …
Published in Journal of Communication Engineering & Systems · Vol. 5, Issue 1, 2015 · pp. 15–20 Read article
-
Production, Characterization and Toxicological Evaluation of Eco-Friendly Flavolipid Biosurfactant
Abstract: At present majority of surfactants are chemically synthesized. Nevertheless, in recent years, much attention has been directed towards biosurfactants due to their broad range of functional properties, there are cheaper as they can be produced from alternative sources. They have applications in the fields, such as: oil recovery process, as an additive in food processing industry, pharmaceuticals preparations, energy saving technologies etc. As they are being microbial derivatives, it is …
Published in Research and Reviews: A Journal of Toxicology · Vol. 4, Issue 1, 2014 · pp. 16–21 Read article
-
A Review on Aerospace Materials and Metallurgy
Abstract: Aerospace metalworking is comparable to the foundation of both space travel and transportation. It involves the scientific design and application of metals and alloys to offer components with the strength required for flight and the ability to survive harsh environments. Although other alloys feature cobalt or iron as the main ingredient, nickel makes up most of alloys used in aeronautical applications. When exceptionally high strength is required in moderate-temperature settings, …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 2, Issue 1, 2024 · pp. 21–26 Read article
-
Evaluating the Optimal Alccofine-1203 Replacement Ratio in M20 Grade Concrete
Abstract: The primary objective of this research is to investigate the potential of partially replacing cement with Alccofine 1203 in M20 grade control concrete and to evaluate the resulting effects on the mechanical properties of the concrete. Alccofine 1203, a high-performance mineral admixture known for its ultrafine particle size and high reactivity, was used as a partial cement substitute at varying replacement levels of 5%, 10%, and 15% by weight of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 294–299 Read article
-
An Exploratory Study on the Application of Locust Bean Pod Extract as a Natural Binder in the Manufacture of Laterite Blocks for Affordable Housing Construction
Abstract: This study investigates the potential application of locust bean pod extract as an alternative binding material in the production of laterite blocks for local building construction. It also examines the availability and distribution of locust bean pod resources across Nigeria and other parts of Africa. Locust bean pods are typically treated as agricultural waste and discarded after the seeds are removed, creating an opportunity to convert this underutilized by-product into …
Published in Journal of Industrial Safety Engineering · Vol. 13, Issue 1, 2026 · pp. 36–45 Read article
-
Thermoplastic Resins: A Novel Approach to Removable Partial Dentures
Abstract: Behind all complexities in the world stand simple solutions. In the present era of fixed prosthetic dentistry cast partial dentures are still being used owing to the anatomical and biomechanical constraints in the oral cavity. The difficulties encountered by patients with cast partial denture are an age old saga. The common problems are unaesthetic appearance of the clasp, rigidity of denture base resin, unavoidable tooth preparation, weight of the prosthesis, …
Published in Research and Reviews: A Journal of Dentistry · Vol. 5, Issue 2, 2014 · pp. 3–8 Read article
-
Experimental Analysis of Filler Slab Using Self-Compacting Concrete
Abstract: Present-day self-compacting concrete is classified as an advanced construction material. Self-compacting concrete (SCC) is an innovative concrete that does not require vibration for placing and compaction. It can flow under its weight, completely filling formwork and achieving full compaction, even in the presence of congested reinforcement. The hardened concrete is dense, homogeneous and has the same engineering properties and durability as traditional vibrated concrete. An important improvement of health and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 3, 2016 · pp. 15–24 Read article
-
Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite for Cylinder Liner
Abstract: Cylinder liner is used in engine block to give a wear protective surface for piston and piston rings. Friction accounts for a loss of over 30% of the total vehicle power. Over half of that power loss can be attributed to the frictional loss between piston rings and cylinder bores. The best approach for improving power train efficiency is to reduce friction loss and the way for reducing the rolling …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 1, 2017 · pp. 17–29 Read article
-
Digital Voting System Using Blockchain
Abstract: The advent of blockchain technology has ushered in a new era of secure, transparent, and decentralized systems, providing a promising foundation for various applications, including electronic voting (e-voting). This report examines the development and deployment of a blockchain-based e-voting system designed to tackle the ongoing issues of security, transparency, and voter privacy in elections. The system utilizes blockchain's core features, including immutability, decentralization, and cryptographic security, to establish a secure …
Published in Journal of Web Engineering & Technology · Vol. 11, Issue 3, 2024 · pp. 8–14 Read article
-
Enhanced Mechanical Properties of AZ31 Magnesium Alloy Composite Reinforced with Carbon Nanotubes and Nano hydroxyapatite
Abstract: Magnesium alloys represent a novel category of biodegradable materials, offering numerous advantages in addressing the limitations associated with conventional biomedical materials. Magnesium-based metallic biomaterials offer a promising solution for fixing fractures, ensuring effective treatment without the inconvenience of subsequent implant removal procedures. In the present work, AZ31 Mg-alloy was chosen as the base material. Five specimens were meticulously fabricated, each varying in weight percentages of reinforcement materials: 0wt%, 0.5wt%, 1wt%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 206–217 Read article
-
Comparison of the Compressive Strength of Concrete Made with Palm Kernel Shell and Gravel as Coarse Aggregates
Abstract: The investigation of alternative materials for the construction, comparison of the compressive strength of concrete made with palm kernel shell as coarse aggregate and concrete made with gravel. A mix proportion of 1:2:4 with water cement ratio of 0.6, ordinary Portland cement, PKS, gravel and sand were used for this research. 24 cubes were cast and tested for compressive strength at 7, A14, 21 and 28 days. The result showed …
Published in Journal of Construction Engineering, Technology & Management · Vol. 12, Issue 1, 2022 · pp. 12–18 Read article
-
Development and Analysis of Novel Silver Ion-Conducting Glass-Polymer Electrolytes
Abstract: The development of efficient and stable solid electrolytes is crucial for advancing energy storage technologies such as solid-state batteries and electrochemical devices. In this study, a novel series of silver ion-conducting glass–polymer electrolytes (GPEs) based on the composition (1–x) PEO: x[0.75AgI:0.25(Ag₂O:WO₃)] with x ranging up to 50 wt.% was synthesized and thoroughly analyzed. Unlike conventional techniques such as solution casting or sol–gel methods, these GPEs were fabricated using an innovative …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 600–605 Read article
-
Next-Generation Conductive Polymer Composites for Flexible and Wearable Electronics
Abstract: The rising demand for flexible and wearable electronics has accelerated research into conductive polymer composites (CPCs) due to their lightweight nature, electrical conductivity, and mechanical flexibility. Despite significant advancements, challenges such as reduced conductivity under mechanical deformation and limited durability persist. This study aims to develop next-generation CPCs with enhanced conductivity, flexibility, and self-healing capabilities. Hybrid nanofillers—graphene, carbon nanotubes (CNTs), and silver nanowires (AgNWs)—were incorporated into bio-based conductive polymers through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 550–566 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article