Search
240 articles for “and XRD”
-
Structural, Electrical and Optical Properties of RGO-Incorporated PVA Nanocomposites for UV Shielding Applications
Abstract: Polymer matrix-based nanocomposites reinforced with appropriate nanoparticles have the potential to exhibit improved electrical, optical and mechanical properties, as well as improved UV-shielding capabilities. These materials are currently being utilised for various commercial applications, such as window shields and automotive components. We prepared reduced graphene oxide (rGO)-incorporated polyvinyl alcohol (PVA) polymer nanocomposites employing a solution casting method. XRD and SEM results confirmed that the rGO nanosheets were dispersed well in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 119–137 Read article
-
Geotechnical Influence Factors in Empirical Design of Highway Pavement: The A123 Ilorin – Lokoja Highway, Nigeria Case Studies
Abstract: Site investigation and application of geological and geotechnical influence factors on the highway were investigated. Method involved field sampling, geotechnical laboratory and x-ray diffraction analysis and use of SRTM extracted slope and drainage parameters; and their integration in a GIS based multi-criteria decision analysis to derive a subgrade suitability map as a design tool. The suitability criteria classified the highway into four (4) design sections. Section one for very low …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 53–70 Read article
-
Experimental Studies on the Mechanical and Microstructural Properties of Sustainable Concrete Incorporating Palm Oil Industrial Waste
Abstract: Diving into the world of concrete, normal concrete is widely used in construction but poses environmental challenges due to significant carbon dioxide emissions from cement production. Incorporating oil palm shells (OPS) and palm oil fuel ash (POFA) into concrete offers a sustainable alternative, utilizing waste products from the palm oil industry and reducing environmental impact. Experimental studies have examined the use of OPS and POFA as partial replacements for coarse …
Published in Journal of Polymer & Composites · Vol. 12, Issue 7, 2024 · pp. 19–40 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Development of Biomass-Derived Composites From Commodity Plastics Via Pyrolysis For Enhanced Corrosion Protection of Metals
Abstract: Escalating environmental concerns and the depletion of fossil resources have spurred the need for sustainable and eco-friendly materials. By converting plastic waste into valuable carbonaceous materials via pyrolysis, both plastic pollution and resource scarcity can be addressed. The process involves the thermal decomposition of plastics in an inert atmosphere, producing a mixture of gases, liquids, and solid residues rich in carbon. These carbonaceous residues are then incorporated with biomass materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 59–70 Read article
-
Red emissive MSA capped CdTe quantum dots for cell imaging
Abstract: The changes in the optical and electronic properties of the materials due to the quantum confinement effect in semiconductor nanoparticles have attracted huge interest in the scientific community. Within the semiconductor nanoparticles, the quantum dots (QDs) deserve a special position due to their high quantum confinement effect and unique optoelectronic properties. Among the semiconductor quantum dots, CdTe attracts more attention due to its easy manufacturing, large Bohr exciton radius, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 716–721 Read article
-
Sustainable Innovations in Green Nanotechnology for Nanoparticle Synthesis
Abstract: Green nanotechnology is an emerging field that focuses on the environmentally friendly production of nanoparticles through biological and sustainable processes. This approach has diverse applications across industries such as pharmaceuticals, energy, electronics, and bioengineering. Compared to conventional methods, biologically driven nanoparticle synthesis, particularly utilizing green chemistry principles, offers a safer, eco- friendly, non-toxic, and cost-effective alternative. Metal nanoparticles are commonly synthesized through top-down and bottom-up strategies using physical, chemical, and …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 3, Issue 1, 2025 · pp. 31–37 Read article
-
Synthesis and Characterization of Sustainable, Low-Cost, Biomass-Derived Carbon Films from Hevea Brasiliensis (Rubber) Wood for Environmentally Friendly Gas Sensors with Enhanced Selectivity and Sensitivity to Polar Vapors and Hazardous Gases
Abstract: Hevea brasiliensis (rubber) wood sawdust was utilized to fabricate carbon gas sensors for detecting 1000 ppm of ethanol, methanol, acetone, carbon dioxide, and ammonia gases. The carbon particles were prepared by phosphoric acid impregnation followed by thermal activation and then fabricated into films on conductive and non-conductive substrates using the doctor blade method. X-ray diffraction (XRD) analysis revealed distinct graphitic features with peaks at the (002) and (100) planes, indicating …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 22–36 Read article
-
Comparative Evaluation of the Pozzolanic Activity of Artificial Pozzolans: Steel Slag, Fly Ash, and GGBFS
Abstract: Evaluating the pozzolanic activity of specific industrial waste is crucial given the growing demand for cementitious materials. This research aims to expand the possibilities of incorporating pozzolanic waste such as Steel Slag (SS) as additives to cement. SS is a byproduct of the steel production process. A byproduct of the steelmaking process, slags have long been used as aggregates in building materials like concrete and roads. A closed-loop structure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 341–361 Read article
-
Preparation and Characterization of PVA-MgO Nanocomposite Films
Abstract: In this work, Magnesium Oxide Nanoparticles (MgO NPs) doped with 3 g of polyvinyl alcohol (PVA) at different weight percentages (0, 2, 4, 6, and 8 wt.%) using the solvent casting method, to fabricate thin PVA-MgO nanocomposite (NC) films. These films were characterized by (i) XRD, SEM, EDX, DLS, and Zeta Potential for morphological studies, (ii) FTIR spectra and UV-Visible techniques for spectroscopic studies and (iii) DSC for thermal studies. …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 2, 2025 · pp. 40–62 Read article
-
Synthesis and Characterization of Forsterite Incorporated HDPE Composites for Microwave Substrate Application
Abstract: High Density Polyethylene (HDPE) combined with dispersed forsterite (Mg₂SiO₄) powder was utilized to fabricate polymer matrix composites (PMCs) aimed at high-frequency microwave substrate applications. Forsterite powders were synthesized using the mixed oxide method, and their phase purity was confirmed by X-ray diffraction (XRD) analysis. The dispersion and morphology of the ceramic filler within the HDPE matrix were examined through Scanning Electron Microscopy (SEM), ensuring a homogeneous distribution essential for optimal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 109–120 Read article
-
Gas Sensors Fabricated using Carbon Powder Derived from Dried Banana Peels Waste to detect Methanol, Ethanol, Acetone Vapors and Carbon Dioxide Gas
Abstract: Low cost and environmentally friendly activated carbon powder was synthesized using waste banana peels. Phosphoric acid was utilized as activation agent. Doctor blade method was employed to fabricate films of activated carbon on conductive or nonconductive glass substrates. Films were subsequently annealed at 70 0C for 30 minutes in air. According to XRD patterns, single phase of activated carbon was crystallized in thin film form. Carbon prepared from banana peels …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 14–25 Read article
-
Exploring the Luminescent Behavior of Dysprosium-Doped Halo-sulphate Compounds
Abstract: In essence, this study aims toward understanding the photo-luminescent properties of Dy³⁺ halogenated sulfates, viz., synthesis, characterization, and luminescent behavior of the materials. Dysprosium ions are introduced into the halo-sulfate matrices to investigate their suitability for solid-state lighting applications. The aim of the study is to explain the mechanisms of the photo luminescence of Dy³⁺ and study the influence of the doping concentration on luminescence efficiency and the thermal stability …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 01–06 Read article
-
Synthesis of Thermal Resistant and Transparent Al2O3 Reinforced Epoxy-Based Composite Coatings
Abstract: This study explores the influence of thermal treatment on the structural, optical, and surface wettability characteristics of epoxy-based composite coatings reinforced with 3 wt.% aluminum oxide (Al₂O₃) nanoparticles. The coatings were synthesized via a dip-coating method on carbon fiber substrates and subjected to controlled thermal treatments at 300 °C, 400 °C, and 500 °C to assess their thermal resilience. X-ray diffraction (XRD) analysis confirmed the structural integrity of the composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 178–183 Read article
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article
-
Novel Poly (Methyl Cellulose-G-Acrylamide)/Sodium Alginate Based Zeolite 4A Filled Mixed Matrix Membranes for The Separation of Water-Isopropyl Alcohol Mixtures by Pervaporation
Abstract: The Filled blend matrix membranes of (Methyl Cellulose-g-Acryl amide)/Sodium Alginate {(MC-g-AAm)/NaAlg} prepared via solution casting method by in situ incorporation with 4A zeolite particles in 5, 10 and 15 mass % with respect to the weight of (MC-g-AAm)/NaAlg membrane. Several analytical tools such as scanning electron microscope (SEM), atomic force microscope (AFM), Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and thermo-gravimetric analysis (TGA) were …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 131–152 Read article
-
Effect of Bi2O3 Content and Sintering Temperature on the Frequency-Dependent Magnetic Properties of Nanosized Barium Hexaferrite
Abstract: The magnetic properties of commercially available nanosized barium hexaferrite (BaFe12O19) are studied. The particles were characterized using X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and high-frequency magnetic measurements. The frequency-dependent magnetic properties viz. complex permeability and loss tangent were analyzed within the 10 MHz to 1 GHz range. Variations in complex magnetic permeability and loss tangent were discussed under varying sintering parameters such as temperature and sintering aid content. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 107–113 Read article
-
TiO₂ Nanostructured Material-based Gas Sensor for Detecting Oxygen and LPG Gases
Abstract: This Paper investigates the use of TiO2 nanowires and nanotetrapods on glass and silicon substrates for sensing combustible gases such as LPG (Liquid Petroleum Gas) and Oxygen. The growth of Titanium dioxide (TiO2) nanowires/nanorods/nanotetrapods was investigated using both physical and chemical methods. In thermal evaporation method, both with and without vacuum conditions, was employed to synthesize various TiO2 nanostructures. A vacuum coating machine was utilized to create uniform TiO2 thin …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 443–451 Read article
-
Exploring Polymer Biocomposite as a Sustainable Filter for Water Treatment
Abstract: The present study explores the utilization of polylactic acid (PLA), a renewable polymer combined with surface-modified nanocellulose (SMNC), and pectin derived from Borassus flabellifer leaves and fruits respectively. Existing methods of filtration are synthetic and affect the environment and public health at an alarming rate thereby making biopolymer-based membranes a greener and effective approach for water treatment. PLA-SMNC-pectin biofilm was fabricated using 88.5 mg PLA, 3.5% (wt. % of PLA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 594–608 Read article