Search
153 articles for “Ku-band”
-
LNA-BPF for Receiver Applications in ISM Band
Abstract: A new approach of design and performance analysis of low-noise amplifier with band-pass filter at 2.45 GHz is proposed in this paper. High gain of 15.99 dB and noise of 1.024 dB is achieved at a frequency of 2.45 GHz. A low noise amplifier is used in receiver applications to amplify possibly very weak signals. LNA and BPF are placed in the front end of the receiver circuit so that …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 2, 2016 · pp. 7–12 Read article
-
Design a Patch Antenna with Metamaterial for Electromagnetic Interference Sensor
Abstract: This paper proposes a design of a patch antenna by using pentagonal shaped metamaterial for Electromagnetic interference sensor. Pentagonal shaped metamaterial is used to increase bandwidth of patch antenna. Metamaterial possesses properties such as negative permittivity and negative permeability. It reduces return loss of antenna and increases the directivity. Two identical rectangular patch antennas have designed for transmitting and receiving purpose. This proposed antenna has been simulated at 2GHz frequency …
Published in Journal of Power Electronics and Power Systems · Vol. 3, Issue 1, 2013 · pp. 18–21 Read article
-
Application of Polypyrrole/Lead Sulphide Nanocomposite in UV Light Assisted Photocatalysis and Gas Sensing
Abstract: The synthesis of ppy/lead sulphide nanocomposite was done using the co-precipitation method. The synthesized ppy/leadsulphide nanocomposite was characterized using Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), X-Ray Powder Defraction (XRD), Fourier Transformation Infra-Red Spectroscopy (FTIR), UV-Vis Spectroscopy techniques. The optical bandgap of the synthesized ppy/lead sulphide nanocomposite was observed to be 3.48 eV. The synthesized material is crystalline, with an average crystallite size of 2.51 nm. The photocatalytic …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 13–27 Read article
-
Design and Fabrication of Patch Antenna using DGS for WLAN and WIMAX Applications
Abstract: AbstractIn this paper a small size micro strip patch antenna with dual frequency characteristics is presented. The proposed antenna is designed on an FR-4 epoxy dielectric substrate with the thickness of 1.6 mm and dielectric constant er =4.3. The proposed antenna has used defected ground structure (DGS) stop theory to create dual frequency band characteristics 2.13GHz – 3.25 GHZ for WIMAX and 5.725GHz – 6.3084 Hz for WLAN, respectively. The …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 1, 2020 · pp. 5–16 Read article
-
EBG Technology and Applications; A Review
Abstract: This present paper concentrates on applications of Electromagnetic band gap (EBG) technology that is operating at microwave and sub mm wave frequencies. Some of examples of Electromagnetic band gap configurations in the region of microwave are shown, that includes array antennas, high precision GPS, mobile telephony, wearable antennas and diplexing antennas. A 500 GHz dipole configuration and a novel heterodyne mixer are shown as examples for sub millimeter wave region. …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 1, 2015 · pp. 21–36 Read article
-
Implementation of FSO Link for Full Duplex Short Range Communication
Abstract: Extensive data transfer is a need of all modern communicating devices. Wired communication requires lots of bulky wires to be laid everywhere. To setup a small ad hoc network, it is not advisable to lay down long wires. Other than requirement of wires, one also needs very good communication speed to withstand the need of very high bandwidth for multimedia data transfer. A communication link that satisfies both the requirements …
Published in Journal of Electronic Design Technology · Vol. 7, Issue 2, 2016 · pp. 8–15 Read article
-
Analysis of Fractal based Nested Geometries Built on Design Configurations
Abstract: AbstractFractal antenna based on the nested geometries are proposed and designed in this letter. The paper depicts the design optimization of the nested geometries for multi-rate characteristics. The antenna is fed by waveguide port. The design is obtained at the center frequency 3.5 GHz. Moreover the effect various nested elements have been observed in the geometry. The modification in geometry is introduced using pentagonal elements of the patch. The enhancement …
Published in Journal of Communication Engineering & Systems · Vol. 4, Issue 3, 2014 · pp. 9–17 Read article
-
Performance Estimation of Link-Compensated DWDM RoF and FSO Based Hybrid Network
Abstract: The demand for data rate is increasing rapidly as well as the number of users is also increasing. So, to fulfill both demands and also taking care of necessary optical bandwidth. A dense wavelength division multiplexing (DWDM) technology-based 48 channels with 40Gbps data rate free-space optical (FSO) communication system using symmetrical compensation technique is designed. In this paper, an attempt is made to increase the link range of the transmission …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 2, 2019 · pp. 9–13 Read article
-
Magnetic Metal–Polymer Composites with Ferromagnetic Particle Networks for EMI Shielding in Flexible Electronics
Abstract: The rapid expansion of flexible and wearable electronic systems has intensified the demand for lightweight, mechanically compliant materials capable of effective electromagnetic interference (EMI) shielding. In this study, magnetic metal–polymer composites with magnetically aligned ferromagnetic particle networks were developed and systematically investigated for EMI shielding in flexible electronics. Thermoplastic polyurethane (TPU) was employed as an elastomeric polymer matrix due to its excellent flexibility, dielectric characteristics, and compatibility with particulate fillers. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 25–39 Read article
-
The Evolution of Payments: Traditional Bill Methods Compared to Mobile Innovations
Abstract: "Mobile Payment Experiences in the Future" explores the transformative impact of emerging technologies: Artificial Intelligence (AI), 5G connectivity, and biometrics, on the evolution of mobile payment systems, moving beyond today's simple "tap and pay" solutions. As mobile payments become an essential component of global commerce, these innovations are set to redefine the payment landscape by enhancing transaction speed, security, and personalization. AI will enable real-time fraud detection, adaptive user verification, …
Published in International Journal of Mobile Computing Technology · Vol. 3, Issue 1, 2025 · pp. 17–27 Read article
-
Material Selection for Optimized Antenna Performance: A Comprehensive Analysis
Abstract: The performance of antennas is heavily influenced by the choice of materials used in their design. This work presents a comprehensive analysis of various materials and their properties relevant to antenna applications, focusing on parameters such as dielectric constant, conductivity, magnetic permeability, and thermal stability. The interplay between these properties significantly affects the efficiency, bandwidth, gain, and impedance matching of the antenna. This study explores materials such as metals, ceramics, …
Published in Journal of Microwave Engineering and Technologies · Vol. 12, Issue 2, 2025 · pp. 1–10 Read article
-
Evaluation of Antenna Performance using a Novel Measurement Device: Methodology and Results
Abstract: In the last decade, the field of On Chip Antennas (OCA) has experienced unprecedented growth due to the introduction of small, low-cost, low-power System-on-Chip (SoC) wireless communication devices. OCAs are superior to conventional off-chip antennas in a number of ways. They first reduce the overall size of the wireless communication system since the presence of an OCA eliminates the need for an impedance matching network between the antenna and RF …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 11, Issue 1, 2024 · pp. 24–29 Read article
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
High Frequency Design Approach and Feasibility Study of HBT Based W-band (90.0 GHz-100.0 GHz) Amplifier using 130 nm SiGe Based BiCMOS Technology
Abstract: This paper present high frequency design approach and feasibility study of HBT (Hetero Junction Bipolar Transistor) based two-stage cascode amplifiers at W-band (90.0 GHz-100.0 GHz). The proposed amplifier has design using 130 nm SiGe based BiCMOS technology. This paper used low cost technology for designing of w-band amplifier and this is novelty of this paper. The schematic design and feasibility study has been carried out using Cadence software. The selection …
Published in International Journal of Digital Communication and Analog Signals Read article
-
Hybrid Best-Response Algorithms for Mobile Computing Offloading: A Comprehensive Review
Abstract: The exponential growth of mobile applications with intensive computational requirements has necessitated innovative offloading strategies in mobile computing ecosystems. This comprehensive review examines hybrid best-response offloading algorithms integrated with game-theoretic optimization frameworks to address resource allocation challenges in mobile edge computing (MEC) environments. The proliferation of Internet of Things (IoT) devices and bandwidth-intensive applications has created unprecedented demands on mobile network infrastructure, compelling researchers to develop sophisticated offloading mechanisms that …
Published in International Journal of Mobile Computing Technology · Vol. 3, Issue 2, 2025 · pp. 20–26 Read article
-
HFSS-Based Helix Antenna Design Optimization and Simulation
Abstract: This project uses HFSS (High-Frequency Structure Simulator) to simulate, develop, and analyze the performance of a helix antenna for (a particular purpose, such as broadband wireless or satellite communication). Because of their distinctive structural characteristics, helix antennas are well-suited for a variety of high-frequency applications by balancing compactness, high gain, and wide bandwidth. In this work, we parametrically analyze important design parameters including pitch, radius, number of turns, and wire …
Published in Recent Trends in Sensor Research & Technology · Vol. 12, Issue 1, 2025 · pp. 29–35 Read article
-
Investigations On Use of Poly(3,4-Ethylenedioxythiophene): Poly (Styrene Sulfonic Acid) (PEDOT: PSS) Conductive Polymers for Design of Improved EEG Based Brain Computer Interface for Seizure Control and Analysis
Abstract: This research explores the application of Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS) conductive polymers in the design of an enhanced Electroencephalography (EEG)-based Brain-Computer Interface (BCI) for seizure control and analysis. PEDOT: PSS, known for its high conductivity, flexibility, and biocompatibility, is employed to improve the efficiency and sensitivity of EEG electrodes, addressing challenges such as signal noise, skin-electrode impedance, and user comfort. The study evaluates the material’s properties, including its electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 223–241 Read article
-
An Overview on Harnessing Microwave Frequencies for Next-Generation Satellite Communication and Earth Observation
Abstract: In the vacuum of space, where traditional cables cannot reach, humanity has woven an invisible, high-speed infrastructure made of oscillating electromagnetic waves. At the heart of this architecture lies the microwave spectrum—the unsung hero that enables everything from global GPS navigation to real-time climate monitoring. The evolution of global connectivity and environmental monitoring is intrinsically linked to the mastery of the microwave spectrum. As satellite constellations transition from traditional Geostationary …
Published in Research & Reviews : Journal of Space Science & Technology · Vol. 15, Issue 1, 2026 · pp. 1–6 Read article
-
U-Shaped Antenna Design for 5G High Frequency Band
Abstract: Designing small antennas for 5G millimeter wave bands is an emerging research subject in the wireless communication age. This research paper describes the design, simulation, and measurement of a micro-strip patch antenna operating at high frequency, 38 GHz. The substrate material used is FR4 proxy due to its easy availability and cost with the dielectric constant 3.8 to 4.6. The analysis and simulation are done on Ansys HFSS Software. The …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 3, 2023 · pp. 31–40 Read article
-
Current-Voltage Characteristics of 15-Atom Agnrs and Zcnts at Various Bias Voltages: Insights for Polymer Nanocomposite Applications
Abstract: The present research investigates the electronic properties of 15-atom Armchair Graphene Nanoribbons (AGNRs) and 15-atom Zig-Zag Carbon Nanotubes (ZCNTs) under applied bias voltages of 100, 200, 300, 400, 500, and 600 millivolts. Using the Non-Equilibrium Green's Function (NEGF) technique, the study analyzes various electrical features, including current-voltage (I-V) characteristics, to understand the behavior of these nanostructures. The findings reveal that AGNRs exhibit a larger bandgap than ZCNTs, which have a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 135–144 Read article