Search
135 articles for “High-frequency systems”
-
Diffusion-Based Enhancement of Low-SNR Time- Frequency Signals
Abstract: Traditional enhancing techniques are useless in low signal-to-noise ratio (LSNR) situations because noise drastically interferes with communication signals. Based on an enhanced DiffBIR model, this paper suggests a dual-stage signal improvement approach that combines diffusion with deep learning. By combining the Inception module for multi-scale feature extraction with the Pixel Fusion Attention (PFA) module for significant region highlighting, the model improves signal recovery in the time- frequency domain. Experiments show …
Published in Current Trends in Signal Processing · Vol. 17, Issue 2, 2026 Read article
-
Fast Charging of Lithium-Ion Batteries Using a Full-Bridge Rectifier and Buck Converter with SOC Tracking
Abstract: This paper presents a simplified and cost-effective approach to electric vehicle (EV) fast charging by replacing the conventional neutral point clamped (NPC) converter with a full-bridge diode rectifier followed by a buck converter. The proposed topology is designed to deliver a regulated 80 V DC from a three-phase AC grid to charge a lithium-ion battery at a controlled current of 3 A. The converter design includes a three-phase diode bridge …
Published in Trends in Electrical Engineering · Vol. 15, Issue 2, 2025 · pp. 18–25 Read article
-
Optimized Rectangular Microstrip Patch Antenna for Wireless Communications
Abstract: The design is for a microstrip patch antenna that is rectangular. The wireless local area network [WLAN] resonance frequency of the suggested antenna is 2.4GHz. The antenna's frequency selection has made it ideal for use in wireless local area networks, or WLANs. The antenna design is optimised using the optometric feature of the High Frequency Structure Simulator software (HFSS) to increase the accuracy and efficiency of the suggested antenna. HFSS …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 12, Issue 1, 2025 · pp. 37–47 Read article
-
Development and Assessment of Levetiracetam Microspheres Utilizing Synthetic and Natural Polymers: A Biomedical Engineering Perspective
Abstract: In the present study, comparative study of Levetiracetam loaded microspheres using Ethyl cellulose as synthetic and Sodium alginate as natural polymers was done. Solvent evaporation and ionic gelation technique has been successfully employed to produce Levetiracetam loaded ethyl cellulose and sodium alginate microspheres with optimal drug encapsulation that sustained the drug release over a period of time. Based on the pre-formulation studies E1 to E4 and S1 to S4 batches …
Published in International Journal of Biomedical Innovations and Engineering · Vol. 2, Issue 1, 2024 · pp. 1–18 Read article
-
Climate Change & Its Effects on Human Health: A Comprehensive Review
Abstract: Anthropogenic climate change has wide-ranging effects on human health and is a significant worldwide concern. This thorough analysis highlights the connections between environmental, social, and biological elements as it explores the complex implications of climate change on health. Numerous health consequences, such as vector-borne infections, heat-related illnesses, respiratory issues, and mental health issues, can be impacted by shifting precipitation patterns, rising temperatures, and a rise in the frequency of extreme …
Published in International Journal of Climate Conditions · Vol. 1, Issue 1, 2024 · pp. 16–20 Read article
-
A Gamified Digital Platform for Sustainable Farming Practices: Simulation, Statistical Analysis, and Water Resource Management Implications
Abstract: Sustainable farming practices play a critical role in enhancing agricultural water use efficiency, conserving limited water resources, and ensuring long-term food security under increasing environmental and climatic pressures. Despite their importance, farmer participation in conventional agricultural extension and training programs remains limited due to low engagement and a lack of sustained motivation. To address this challenge, this study proposes a gamified digital decision-support platform aimed at promoting sustainable agricultural and …
Published in Journal of Water Resource Engineering and Management · Vol. 13, Issue 1, 2026 · pp. 13–24 Read article
-
Developmental Responses to Structured Training Loads in Competitive Youth Judo
Abstract: This study investigates the influence of a planned and regulated training-load structure on the physical and technical growth of elite youth Judoka aged 10 to 16. A four-week training program progressively modified the key variables of training intensity, frequency, and volume to support performance development while avoiding over-fatigue and injury. Ten athletes participated with performance assessed before and after training using tests for Muscular endurance, Core stability, Lower body explosive …
Published in Recent Trends in Sports · Vol. 3, Issue 1, 2026 · pp. 07–15 Read article
-
Thermo-Mechanical and Electrical Properties of Multi-Walled Carbon Nanotube-Enhanced Polyimide Composites for Aerospace Thermal Protection Systems
Abstract: Advanced aerospace thermal protection systems (TPS) require multifunctional materials that simultaneously provide high thermal stability, mechanical strength, and reliable electrical performance. Polyimide (PI) is widely used in aerospace structures due to its lightweight design and exceptional thermal durability, yet its low thermal conductivity and insulating behavior limit its effectiveness in heat dissipation and electromagnetic interference (EMI) shielding applications. This study addresses these limitations by developing multi-walled carbon nanotube (MWCNT)-reinforced polyimide …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 966–982 Read article
-
A Survey on Cognitive Radio Ad Hoc Network Architecture
Abstract: Cognitive radio ad hoc networks (CRAHNs) represent an innovative paradigm in wireless communication, leveraging the dynamic spectrum access capabilities of cognitive radios (CRs) to enhance network performance and spectrum efficiency. The architecture of CRAHNs integrates cognitive radio capabilities with ad hoc networking principles, enabling devices to manage spectrum resources autonomously and intelligently in a decentralized manner. This abstract outlines the key components and functionalities of CRAHN architecture, highlighting its potential …
Published in Journal of Communication Engineering & Systems · Vol. 14, Issue 3, 2024 · pp. 1–7 Read article
-
Railway Track Safety System
Abstract: Railway Track Safety System (RTSS) is a comprehensive monitoring system specifically designed for the Indian railways. It consists of three subsystems that target specific challenges faced by the railways. Our main focus is on addressing four key problems. The first two issues involve cracks in the rails and foreign objects on the tracks. Cracks can occur naturally or be intentionally created to derail trains. Objects like stones can accidentally roll …
Published in International Journal of Industrial and Product Design Engineering · Vol. 2, Issue 1, 2024 · pp. 29–33 Read article
-
A Comprehensive Review of CMOS Analog Circuit Design Techniques for Low-Power VLSI Systems
Abstract: CMOS analog circuit design plays a significant role in the development of modern low-power Very Large-Scale Integration (VLSI) systems used in wireless communication, biomedical devices, portable electronics, embedded systems, and Internet of Things (IoT) applications. Research on low-power CMOS analogue design methodologies has intensified because to the growing need for high-performance, small, and energy-efficient electronic products. However, reducing power consumption while maintaining signal accuracy, noise performance, stability, bandwidth, and overall …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 4, Issue 1, 2026 Read article
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article
-
Developments in Power Electronics for the Integration of Renewable Energy
Abstract: As the integration of renewable energy sources into current power grids becomes an increasingly crucial task in the global transition towards a more sustainable energy future, the role of power electronics in this domain has become paramount. Effective conversion, control, and management of electrical energy from diverse sources hinge on the advancements in power electronics technologies, which are instrumental in addressing this complex challenge. This research paper provides an in-depth …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 37–48 Read article
-
Applying Text Analysis Methods for Emotion Recognition
Abstract: This article presents a comprehensive study of sentiment analysis, a vital task in the realms of natural language processing (NLP) and artificial intelligence (AI). Sentiment analysis involves the extraction and classification of subjective information from textual data, determining whether the sentiment expressed is positive or negative. This paper investigates different approaches and methodologies used in sentiment analysis, encompassing machine learning models as well. Additionally, it discusses the challenges faced in …
Published in Journal of Software Engineering Tools & Technology Trends · Vol. 11, Issue 2, 2024 · pp. 12–22 Read article
-
An Efficient Counter Using Modified Upper and Lower SVL Techniques and TSPCL
Abstract: Low power VLSI has emerged as the fundamental building block of the modern electronic era. This leads to a substantial paradigm shift where both power dissipation, performance and area of utmost importance. In the earlier time of fabrication, power dissipation was mainly neglected due to low device density and low operating frequency needed for computation. But in modern technological era, the need for high device density, higher operating frequency, proliferation …
Published in Research & Reviews : Journal of Physics · Vol. 13, Issue 2, 2024 · pp. 37–43 Read article
-
A Physics-Informed Graph Neural Network Framework for Real- Time Thermal-Aware Fault Prediction and Adaptive Power Optimization in Heterogeneous System-on-Chip Architectures
Abstract: Heterogeneous System-on-Chip (SoC) architectures are increasingly adopted in edge computing, artificial intelligence, autonomous systems, and high-performance embedded platforms due to their superior computational efficiency and flexibility. However, increasing integration density and workload diversity introduce severe thermal hotspots, accelerated device degradation, and unexpected hardware faults that adversely affect system reliability and energy efficiency. This study proposes a Physics-Informed Graph Neural Network (PI-GNN) framework for real-time thermal- aware fault prediction and adaptive …
Published in Journal of VLSI Design Tools and Technology · Vol. 16, Issue 2, 2026 Read article
-
Low-Power Reconfigurable Digital Filter Design Using FPGA for IoT Edge Devices
Abstract: The rapid evolution of the Internet of Things (IoT) has led to an exponential increase in the deployment of edge devices that continuously process real-time sensor data under strict power, latency, and computational constraints. Digital filtering remains a critical operation in these devices, supporting tasks such as noise removal, data conditioning, and feature extraction for intelligent decision-making. However, conventional filter implementations on microcontrollers or fixed digital signal processors often struggle …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 3, Issue 2, 2025 · pp. 23–34 Read article
-
Time and Frequency Response of Non-uniform Overhead Lines Under Corona
Abstract: This study presents an efficient and direct technique for determining both the time and frequency responses of non-uniform overhead power transmission lines operating under corona conditions. The assumed-line's non-uniformity is due to the conductors’ sag. Expressions will be presented for the location-dependent line surge impedance and the unevenly distributed lines’ electrical parameters. The analysis starts with solving the relevant system of differential and algebraic equations, subject to the boundary conditions. …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 2, Issue 2, 2024 · pp. 25–33 Read article
-
Performance Evaluation of Hybrid Polymer Composite Materials for Electromagnetic Interference Shielding in Flexible and Wearable Electronic Devices
Abstract: Wearable electronic devices require novel hybrid polymer composites that offer flexible, lightweight and highly effective EMI shielding characteristics. The development and characterization of flexible polymer composites combining hard magnetic nanoparticles and electrically conductive fillers are explored. The suitability of thermoplastic polyurethane (TPU), polydimethylsiloxane (PDMS) and epoxy resins for use as EMI shielding composite matrices was evaluated in terms of their flexibility, stability and biocompatibility. Hybrid filler systems were developed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 630–648 Read article
-
Machine Learning–Guided Cognitive RF System with Dynamic FFT Resolution and Multiplier Reconfiguration for Adaptive Anti-Jamming Communication
Abstract: This paper presents a hierarchical adaptive RF communication system that integrates signal quality-based pre- processing with machine learning-driven signal classification to achieve robust and resource-efficient operation in dynamic, interference-prone environments. Unlike prior art that addresses adaptive RF, ML classification, or anti-jamming individually, this work uniquely combines real-time SNR/RSSI-based signal strength estimation with dynamic FFT size selection (64-, 256- , or 512-point) and arithmetic-level multiplier reconfiguration (CORDIC, Distributed Arithmetic, and hybrid …
Published in International Journal of Radio Frequency Innovations · Vol. 4, Issue 1, 2026 Read article