Search
1934 articles for “RMSE of 0.052” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Variations of Macroplastics in Water and Sediments at Bundu Waterfront, Upper Bonny Estuary, Rivers State, Nigeria
Abstract: Macroplastic pollution has become an increasingly severe environmental challenge, particularly in urban waterfronts where waste management is inadequate. Bundu Waterfront of the Upper Bonny Estuary in Port Harcourt, Rivers State is a sink for macroplatics from careless disposal of solid wastes and inadequate management thus affecting the biological integrity and aquatic life of this estuary. The resultant impact of the macroplastics on abiotic factors through the evaluation of different floating …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 2, 2026 · pp. 12–22 Read article
-
Early Pregnancy Levels of Fasting Glucose, HbA1c, and Adiponectin as Predictors of Gestational Diabetes Mellitus Among Pregnant Women in Tamil Nadu, India
Abstract: Background: Gestational diabetes mellitus (GDM) is rapidly becoming a major public health issue across India, and Tamil Nadu continues to report some of the country’s highest incidence figures. Identifying women at elevated risk during the first trimester allows health workers to intervene early and improve outcomes for both mothers and babies. This research, therefore, examines whether fasting plasma glucose, glycated haemoglobin, and adiponectin measured at that initial visit can reliably …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 15, Issue 2, 2026 · pp. 10–18 Read article
-
Neuro-Symbolic Agentic AI for Autonomous Scientific Discovery: Integrating Deep Reinforcement Learning, Quantum Simulation, and XAI-Audited LLM Hypothesis Generation in Drug Target Identification
Abstract: The exponential growth of multi-omics data and the increasing complexity of disease-associated protein interactomes have rendered conventional drug target identification pipelines computationally and epistemologically inadequate. This paper presents the Neuro-Symbolic Agentic AI for Scientific Discovery (NS-AASD) framework, a unified architecture that cohesively integrates deep reinforcement learning (DRL) exploration strategies, variational quantum simulation (VQS) of protein conformational dynamics, and XAI-audited large language model (LLM) hypothesis generation within an autonomous scientific discovery …
Published in Research and Reviews : Journal of Computational Biology · Vol. 15, Issue 2, 2026 · pp. 15–24 Read article
-
Design And Fabrication of Contactless Magnetic Gears
Abstract: Modern engineering prioritizes speed, efficiency, and reliability, spurring innovations like contactless magnetic gear systems that transmit torque through interacting magnetic fields from permanent magnets, eliminating physical contact to drastically cut friction, backlash, wear, lubrication needs, and heat—operating silently with minimal vibration and peak efficiencies up to 99% under ideal conditions, outperforming traditional gears in low-speed, high-torque direct-drive applications such as motors. The design centers on two rotors: an outer high-speed …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 42–49 Read article
-
Comprehensive Study on the Mechanical and Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement techniques. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 154–161 Read article
-
Structural, Optical, Surface, and Gas-Sensing Properties of rGO/Sn1–xZnxO₂ Nanocomposites
Abstract: rGO/Sn₁–ₓZnₓO₂ nanocomposites with x = 0.00–0.75 were synthesized by sol–gel auto-combustion followed by wet impregnation with reduced graphene oxide. The adopted synthesis route enabled homogeneous Zn incorporation into the SnO₂ matrix and uniform distribution of rGO, leading to improved structural integrity and interfacial contact between the two components. XRD confirmed a dominant tetragonal cassiterite SnO₂ structure, while FTIR, FESEM, EDS, UV–visible, and BET analyses verified oxide–rGO coupling, Zn-dependent structural modification, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 429–452 Read article
-
Texture Study on 316L Weldments after Heat Treatments
Abstract: AbstractAustenitic stainless steels are regularly used as components in many parts and vessels work in the ocean. Also, 316L stainless steel (SS) is used in nuclear reactors, located near sea. 316L SS base metal (BM) and weld metal (WM) are aged at 450°C and at 350°C for 6000 hours and texture analysis using electron backscatter diffraction (EBSD) revealed that the texture is independent of delta-ferrite content. Inverse Pole Figures (IPF) …
Published in Journal of Thermal Engineering and Applications · Vol. 5, Issue 3, 2018 · pp. 1–10 Read article
-
AEROGELS – A VALUE ADDITION TO HARVEST SOLAR ENERGY
Abstract: Aerogels are a class of synthetic porous ultralight material that was created in 1930 and derived from a gel, in which the liquid component has been replaced with a gas without collapsing the gel structure by freeze-drying. It is made of silica, but carbon, iron oxide, gold, copper, polymer etc. can also be used. During freeze drying the liquid in the gel is slowly dried off without collapsing the solid …
Published in Journal of Thermal Engineering and Applications · Vol. 9, Issue 2, 2022 · pp. 23–39 Read article
-
Adaptive Maximum Power Point Tracking Using Improved Cuckoo Search for Solar Panels During Variable Sunlight and Shaded Conditions
Abstract: India's government seeks to keep up with the country's quickly increasing energy needs, which are mostly satisfied by burning coal and oil. By 2030, 40% of the country's energy is expected to originate from renewable sources, according to official plans. By 2022, New Delhi hopes to generate 175 GW of renewable energy, primarily from solar and wind power, with a target of 100 gigawatts. Although India has very few renewable …
Published in Journal of Thermal Engineering and Applications · Vol. 10, Issue 3, 2023 · pp. 34–45 Read article
-
Twisting, Super Twisting and Adaptive Algorithm Sliding Mode Controller for Second Order Time Delay Systems
Abstract: The sliding mode control approach is widely considered as one of the most effective methods for designing a reliable controller for a complicated higher-order dynamic plant operating under uncertainty. The primary advantages of sliding mode is its low sensitivity to changes in plant parameters and the ability to entirely eliminate disruptions. Sliding mode control has been widely applied as a robust control design methodology that is completely insensitive to uncertainties, …
Published in Current Trends in Signal Processing · Vol. 11, Issue 2, 2021 · pp. 10–27 Read article
-
An insight into the production of bioethanol from the unused Ethiopian waste potatoes
Abstract: The study provides an insight into the production of bioethanol from the unused Ethiopian waste potatoes. A pretreatment process was carried out to convert the potato starch into fermentable sugar through acid hydrolysis. The experimental parameters investigated during the hydrolysis were the temperature, liquid-solid ratio, and treatment time. Optimal values for hydrolysis were determined by the Response Surface Methodology (RSM) using Central Composite Design (CCD). The total reduced sugar content …
Published in Emerging Trends in Chemical Engineering · Vol. 5, Issue 3, 2018 · pp. 1–7 Read article
-
Production of Particle Board from Cotton Stalk
Abstract: The cotton stalks are normally disposed of by burning, which contributes to the emission of harmful greenhouse gases which pollute the environment. This study used cotton stalk for the production of particle board. The study includes collection and preparation of cotton stalk, analyzing using the ASTM method and its morphological structure, determination of proximity and chemical compositions to compare with hardwood characteristics and production of cotton stalk particle board (CSPB) …
Published in Emerging Trends in Chemical Engineering · Vol. 7, Issue 3, 2020 · pp. 23–33 Read article
-
Hexavalent Chromium Resistance Test of Saccharomyces Cerevisiae and Modeling of its Bioaccumulation Process
Abstract: Now a day, the release of high chromium containing tannery waste water from tanning industries to the environment is the life threatening action of human activities and bioaccumulation becomes a better alternative in treating heavy metals(such as Cr(VI) )due to its cost effective, relatively high heavy metal removal capacity and recovery property. Cell suspensions of S.cerevisiae at its exponential growth phase were added to 250 ml plastic flasks of containing …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 1, 2021 · pp. 36–44 Read article
-
Design of a Plant for the Production of Ammonia and Urea Using Aspen HYSYS
Abstract: The design of a plant for the production of 1800 MT/Day of ammonia and 1400 MT/Day of urea using aspen HYSYS was carried out in this work. Ammonia is produced through the Haber-Bosch process, where hydrogen and nitrogen react in the presence of a catalyst producing mixture containing ammonia while urea is produced by the reaction between ammonia and carbon IV oxide. In this work, aspen HYSYS, chemical engineering design …
Published in Emerging Trends in Chemical Engineering · Vol. 9, Issue 1, 2022 · pp. 29–44 Read article
-
Investigation into the Use of Anaerobic Co-digestion of Cow Dung for Biogas Production
Abstract: The research is targeted on investigating the use anaerobic co-digestion of cow dung for biogas production, and to influence a decrease in the concentration of sulphide using direct inclusion of facultative lagoon sediment with sodium and calcium alginate. It was noted that 1 minute concentration of calcium alginate and sodium was introduced right from the beginning of the anaerobic digestion cycle shows the tendency to increase methane concentration and reduce …
Published in Emerging Trends in Chemical Engineering · Vol. 9, Issue 1, 2022 · pp. 23–28 Read article
-
The Application of Buckingham Pi Theorem to Monitor Procurement Service Delivery: A Case Study of Walnut Wood
Abstract: The aim of this research is to demonstrate the application of Buckingham theorem to monitor procurement delivery of Walnut wood. In this investigation, wood material of walnut wood density, constant area, diameter and velocity was used to monitor, predict and simulate the weight, delivery time and tensile strength on the truck. The walnut wood material was investigated in terms of delivery time, tensile strength and the effect on the truck …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 1, 2023 · pp. 54–63 Read article
-
Cadmium and lead heavy metals phytoaccumulation in Imperata cylindrica as affected by the effects of soil organic matter and pH levels
Abstract: Nowadays, pollution of soils and consequent risks are major issues affecting humans and other organisms in the entire ecosystem. Imperata cylindrica grow fast and is of potential in phytoremediation. Imperata cylindrica was studied using different growth media of spiked heavy metal, soil pH and organic matter contents for 60-day. Imperata cylindrica was subjected to washing after harvesting, then roots and shoots were segregated. Sampled soils were digested with 1.0g portion …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 2, 2023 · pp. 31–40 Read article
-
Microstructure and Mechanical Properties of Thin Wall Ductile Iron
Abstract: Currently many cast parts are produced in aluminum rather than cast iron, because of the drive to get high strength /weight ratio for application in automobile and aerospace. Ductile Iron casting of approximately 2-3mm section thickness better known as Thin wall ductile iron (TWDI) having high strength /weight ratio and better mechanical properties than Aluminum alloys. The effect of various parameters like, post inoculation, gating and feeding, moulding sand mix …
Published in Journal of Automobile Engineering and Applications · Vol. 4, Issue 2, 2017 · pp. 35–39 Read article
-
Physical and Mechanical Characterization of Boron carbide(B4C) and waste granite dust reinforced hybrid aluminium composite.
Abstract: In this particular study the concussion of B4C and waste granite dust reinforced on AA6082-T651 hybrid aluminium matrix composite (AMCs)which was fabricated using the stir casting process was investigated.These reinforcements were mixed and varied in the ratio of 1:0,0:1,1:1,1:3,3:1 respectively in the aluminium metal matrix composite .The physical and mechanical characterization of these AMCs were investigated.The obtained results indicate that the density of the composite XCM-5 increased by increasing the …
Published in Journal of Automobile Engineering and Applications · Vol. 8, Issue 2, 2021 · pp. 17–26 Read article
-
Some Properties of Briquettes Produced from Sawdust and Different Binders using a Fabricated Hydraulic Piston Press
Abstract: AbstractThis paper describes a fabricated briquettes hydraulic piston press and some properties of the briquettes produced from sawdust when it was used. The press consists of three basic components: the main frame, the mold and a hydraulic jack fitted with pressure gauge. The parts are readily available in Nigeria and relatively cheap. The piston press was used to produce briquettes at 120 bar compaction pressure using composite sawdust and different …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 2, 2017 · pp. 17–23 Read article