Search
104 articles for “mechanical and microstructural properties”
-
Ultrasonic Dispersion of Halloysite Nanotubes for Enhanced Mechanical, Thermal, and Morphological Performance of Epoxy Composites
Abstract: Halloysite nanotube (HNT)-reinforced epoxy nanocomposites were prepared by mixing HNT with bisphenol-A epoxy (LY 556) using ultrasonication, followed by compression molding. HNT contents of 0–5 wt.% were used. The composites were evaluated for tensile strength, flexural strength, Shore D hardness, Izod impact strength, and thermal stability using thermogravimetric analysis (TGA). The fractured tensile surfaces were also examined to understand the failure mechanism and interaction between HNT and the epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Mechanical & Tribological Characterization of Al2024-Alumina-Graphite Reinforced Monolithic and Hybrid Composites
Abstract: This work investigates the mechanical characteristics of Al2024-Al2O3-Graphite reinforced monolithic and hybrid composites fabricated by the stir casting method. Exploratory work involved the fabrication of monolithic composites with varying Al2O3 contents (5-8 wt%) and hybrid composites with the ratios of Al2O3 (2-6 wt%) and Graphite (1-3 wt%) in matrix Al2024. For improving their dispersion, preheated reinforcement particles were introduced in matrix alloy at controlled stirring rates. A homogeneous particle distribution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 823–836 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
A Review on Effect of Cryogenic Treatment on Wear Resistant Bearing Materials for Automotive Application
Abstract: Cryogenic processing has come as a successful supplementary process to common heat treatment, especially in improving the wear-resistant performance of materials employed in in-vehicle applications. This sub-zero processing is normally performed following quenching and before tempering, during which materials are subjected to extremely low temperatures, typically around -196°C, for prolonged periods of 24 hours. Cryogenic treatment, which involves subjecting materials to extremely low temperatures, has demonstrated promising results in changing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Innovative Synthesis Techniques and Comprehensive Mechanical Characterization of Biopolymer-Based Composites for Advanced Applications in Biochemistry and Materials Sciences
Abstract: Biopolymer-based composites have gotten a lot of attention lately because they could be used in biology and materials science in interesting ways. The main goal of this study is to come up with new ways to make composites and then fully characterize their material properties so that they can be used in more advanced ways. During the production step, a new method is used that combines green chemistry ideas with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 119–136 Read article
-
Experimental Analysis of Mechanical Characteristics of Aluminium Matrix Hybrid Composite Using Seashell Powder And Coconut Shell Powder
Abstract: The purpose of this study is to investigate the manufacturing processes and mechanical properties of composites made of marine shell powder, coconut shell powder, and aluminium. In our project, the MMC was made of aluminium with seashell powder and aluminium with coconut shell powder. A stir casting process fabricated the Composite. The composition of aluminium, seashell powder and coconut shell powder varies. According to the criteria established by the American …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 487–494 Read article
-
A Review on Hybrid Inorganic–Polymer Analog Nanocomposites Incorporating Pozzolanic Wastes and nano-Additives
Abstract: The recent progress of polymer matrix nanocomposites (PMNCs) reveals that the performance of matrix and filler is at the core of matrix–filler interaction, interfacial bonding, and well-controlled distribution of nanoscale reinforcements. Applying these concepts, we consider inorganic particulate systems as hybrid nanocomposites, in which a discontinuous inorganic matrix is effectively reinforced via synergistic co-incorporation of pozzolanic wastes and nano-additives. In the composite system described above, silica-, alumina-rich pozzolanic materials serve …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 131–141 Read article
-
Development and Characterization of Rubber Composites using E-Waste Residue as Functional Filler
Abstract: In the present study, residue generated during the recycling of end-of-life printed circuit boards (PCBs) was utilized as a functional filler in natural rubber to fabricate eco-friendly composites using mixing and molding techniques. Chemical analysis of the residue revealed the presence of several metals, including copper, iron, lead, tin, and zinc. The presence of these metals highlights the need for proper recycling and safe management of PCB residues, as their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 512–523 Read article
-
Material-Level Degradation of Magnetorheological Fluids Under Long-Term Cyclic Shear
Abstract: The long-term functional stability of magnetorheological fluids (MRF) remains a key limitation for their reliable use in adaptive systems and continuously operated magnetorheological devices. In this study, the intrinsic evolution of rheological properties in a commercial MRF (MRC-C1L) is systematically examined under prolonged cyclic loading, with the aim of isolating material-level degradation mechanisms independent of device-related effects. The fluid was subjected to 120,000 low-strain oscillatory shear cycles under a constant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 101–112 Read article
-
Assessing Concrete Strength Through Substituting Coarse Aggregate with Steel Slag and Cement with Bentonite Powder
Abstract: This study investigates the strength characteristics of concrete by partially replacing cement with bentonite powder and coarse aggregate with steel slag. The research aims to evaluate the mechanical performance of concrete through compressive strength, split tensile strength, and flexural strength tests. Bentonite powder is substituted at varying levels of 0, 10, 20, and 30%, while steel slag is incorporated consistently at 60% as a replacement for coarse aggregate. The objective …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 1–8 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
Stone Waste as a Soil Stabilizer
Abstract: The rapid expansion of construction, mining, and stone-processing industries has led to the large-scale generation of stone waste materials such as marble powder, granite slurry, quarry fines, and sandstone residues. The indiscriminate disposal of these wastes poses serious environmental concerns, including land degradation, dust pollution, and contamination of surface and groundwater resources. At the same time, weak and problematic soils continue to present major challenges in geotechnical engineering applications, particularly …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 1, 2026 · pp. 71–77 Read article
-
Advanced Quantitative Analysis of Dynamic Recovery during Warm Working of FCC Alloys
Abstract: Metal working processes of warm working require an advanced quantitative analysis of dynamic and static recovery of dislocations to control microstructures and crucial shape forming properties. Feasibility of dynamic recovery by thermal glide and static recovery by climb of constricted jogs, applicable to ausforming, nano bulk forming by SPD and normalizing has been addressed to design new steels, used for hulls, and tribologically superior bearings. Predictive dislocation recovery analysis shows …
Published in Journal of Materials & Metallurgical Engineering Read article
-
Performance Evaluation of Modified Concrete Incorporating Fly Ash, Silica Fume, Rice Husk Ash, and Calcium Nitrate
Abstract: The growing demand for sustainable and high-performance concrete has led to the incorporation of supplementary cementitious materials (SCMs) and chemical admixtures to enhance mechanical and durability properties. This study investigates the effect of 15% fly ash, 10% silica fume, 10% rice husk ash, and 3% calcium nitrate as a partial replacement for cement in M25 and M30 grade concrete. Experimental results demonstrate that the modified concrete exhibited an increase in …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 35–39 Read article
-
Study on Partial Replacement of Cement with Pinus Fiber and Nano Silica in M30 Concrete Paver Blocks: A Fiber-Reinforced Polymer-Cement Composite Approach
Abstract: This study investigates the partial replacement of cement in M30 grade concrete paver blocks using nano silica and Pinus fiber, with a primary focus on mechanical performance, sustainability, and long-term durability and promoting sustainability. Portland cement, a major contributor to global CO₂ emissions, can be partially substituted using supplementary materials to create eco-efficient construction solutions. Nano silica, due to its high pozzolanic reactivity and ultrafine size, improves the microstructure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 63–76 Read article
-
Fabrication and Analysis of Al 7075 Based Metal Matrix Composites - A Review
Abstract: Aluminium 7075 alloys are extensively used in aerospace, marine, aviation, and automotive industries due to their superior mechanical properties, high strength-to-weight ratio, and low density. However, to further enhance their performance, aluminium-7075 metal matrix composites (AMMCs) are developed by incorporating various reinforcements. This paper focuses on the influence of reinforcements on the mechanical, tribological, and corrosion behavior of AMMCs. The study examines fabrication techniques, particularly the stir casting method, which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–12 Read article
-
Experimental Investigation of Boron Carbide Reinforced Al-Mg-Si Alloy Nano Composites by the Stir Casting Method Using Machine Learning Algorithm
Abstract: For the purpose of this experiment, Al-Mg-Si alloys were manufactured with the use of the stir casting process with a metal mold. The alloys had different weight percentages of nano boron carbide, which ranged from 0 to 4% by weight. The intervals between the percentages were 0.5. Following that, the microstructural and mechanical parameters of the as-cast alloy and the nano composites were compared and contrasted according to ASTM Standards …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1766–1779 Read article
-
Thermal and Microstructural Evaluation of Natural-Glass Fiber Hybrid Composites: Sustainable Alternatives to Synthetic Materials
Abstract: The scope of engineering requirements for composite materials, which mix features from several elements engaged in engineering applications to enable greater performance, cannot be adequately understood in this way. The most recent of these materials are hybrid composites, which combine synthetic and natural fibers, particularly glass fibers, and are anticipated to create new, promising materials in terms of their ties to cost, performance, and consistency. From the perspective of their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1275–1285 Read article
-
Mechanical Performance Evaluation of Brachyuran Shell Particle-Infused S-Glass Fibre Epoxy Polymer Composites
Abstract: Epoxy composites bio-filled with brachyuran crab shell powder and reinforced with S-glass fibres at different loadings (2%, 4%, and 6%) are tested for their mechanical properties in this work. Using modest amounts of filler significantly improved hardness, ultimate tensile strength, and flexural strength in the empirical data. The largest increase in hardness was 64.42% at 4% filler, up from 26.22% at 2%; however, there was a dramatic decrease to 13.11% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 500–507 Read article
-
Crystal Defects and Their Characterization in Modern Materials Science
Abstract: The physical and chemical properties of crystalline solids are fundamentally dictated by deviations from structural perfection, known as crystal defects. From the point-scale vacancies that drive diffusion to the planar boundaries that determine mechanical strength, defects serve as the primary "tuning knobs" in material design. This review provides a comprehensive examination of point, line, and planar defects, exploring their formation energetics and their role in plastic deformation via crystallographic slip. …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 1, 2026 · pp. 15–19 Read article