Search
323 articles for “Thermal energy”
-
Development and Performance Analysis of Pyramid Shaped Novel Solar Water Heater
Abstract: Solar water heating is an environmentally clean technology that utilizes solar energy as a renewable energy source for heating water. Several publications indicate that the interest in residential solar heating using flat-plate solar collectors remains high and current. The optimal tilt angle for solar collectors is estimated to be around 40°, resulting in energy savings, solar fraction, and collector efficiency of 1284 kWh, 29.6%, and 37.9%, respectively, for the entire …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 16, Issue 2, 2025 · pp. 1–6 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Advancements and Challenges in Solar Water Heating Systems: A Sustainable Solution for Energy Conservation and Environmental Impact Reduction
Abstract: In today's world, the over-reliance on traditional fuels such as coal, diesel, and gas has led to significant environmental challenges, including global warming, air pollution, and resource depletion. As a result, the need for transitioning to renewable and clean energy sources like solar energy has become urgent. Solar energy is abundant, sustainable, and offers great potential to meet the world’s energy demands without compromising environmental health. One of the most …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 16, Issue 2, 2025 · pp. 14–19 Read article
-
Nanofluids: Advanced Synthesis Methods, Innovative Applications, and Future Directions
Abstract: Nanofluids, a novel mixture of nanoparticles and base fluids, is an innovative blend that has appeared as a transformative advancement in heat transfer and thermal management technologies. This study is going to discuss advanced synthesis methods, properties, and extensive applications of nanofluids in various fields, such as biomedical engineering, electronics cooling, solar energy, and machining. Optimization techniques such as nanoparticle selection, concentration control, and computational fluid dynamics modelling are also …
Published in Journal of Nuclear Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 1–11 Read article
-
Evaluating the Performance, Emissions, and Combustion Characteristics of CRDI Diesel Engines Using Pine Oil Blends as a Sustainable Fuel Alternative
Abstract: The performance of Common Rail Direct Injectors (CRDI) diesel engines is examined in this study in relation to interacts of pine oil used as an alternative fuel. Finding sustainable fuel solutions is of paramount importance given the growing environmental concerns and the decreasing supply of fossil fuel resources. Pine oil, obtained from resin tapped from pine trunks and processed through steam distillation to separate turpentine from rosin, offers a viable …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 3, Issue 1, 2025 · pp. 24–33 Read article
-
Modeling of MHD Hybrid Nanofluid Flow with Radiation and Chemical Reaction Effects for Advanced Composite and Energy Applications
Abstract: Hybrid nanofluids reinforced with polymer-based matrices and nanoparticles have emerged as promising working fluids for advanced composite processing and thermal management systems. Their superior thermo-physical properties enable efficient cooling and energy transport, making them suitable for applications in polymer extrusion, composite curing, thermal insulation coatings, solar energy devices, electronic packaging, and nuclear system cooling. In this study, we investigate the heat and mass transfer behavior of magnetohydrodynamic (MHD) hybrid nanofluid …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 648–660 Read article
-
Development and Performance Evaluation of GO–ZnO/PU Hybrid Nanocomposite Coatings for Improved Optical Transmission, Cooling, and Self-Cleaning in PV Systems
Abstract: The performance of solar photovoltaic (PV) modules with time is affected by thermal heating, dust buildup, and exposure to ultraviolet (UV) light; as a result, the power loss increases rapidly during the use condition. In this study, a polyurethane (PU) nanocomposite, fabricated with graphene oxide and zinc oxide (GO–ZnO), is invented and examined. Improvements in heat management, light transmission, and dirt resistance are planned for PV glass surfaces. The nanocomposite …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 243–249 Read article
-
Optimization and CFD Analysis of Fin-Enhanced Cooling Systems for Improved PV Efficiency
Abstract: This study is about optimizing and doing a CFD (Computational Fluid Dynamics) analysis of fin-enhanced cooling systems to improve the efficiency of photovoltaic (PV) systems. Photovoltaic (PV) panels are sensitive to temperature changes; the temperature influences the performance and lifespan of these panels. High temperatures cause their electrical output to reduce, thereby limiting their performance. In order to address this problem, several coolants such as air, liquid, phase change materials, …
Published in Journal of Power Electronics and Power Systems · Vol. 15, Issue 1, 2025 · pp. 19–29 Read article
-
A Comprehensive Study of various Multi-Area Hybrid Power Systems for Generation Control
Abstract: This paper is a detailed examination of multi-area hybrid power systems in the control of the generation taking into consideration the two area up to five area connected networks. As renewable energy sources are more and more integrated, and modern grids become more and more complex, the stability of the system itself and the frequency regulation have risen to a major issue. The study highlights the significance of Automatic Generation …
Published in International Journal of Electrical Power and Machine Systems · Vol. 3, Issue 2, 2025 · pp. 28–42 Read article
-
A Review on Enhancement of Building Energy Efficiency Through Insulation
Abstract: This review examines the heat insulation properties of bricks, which are vital for enhancing energy efficiency in buildings. Bricks serve as a fundamental component in construction, and their thermal performance significantly impacts overall energy consumption. Recent advancements in brick manufacturing have led to the development of materials with improved thermal insulation properties. The incorporation of specific additives into brick composition has demonstrated notable improvements in their ability to resist heat …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 19–26 Read article
-
Impact of Semiconductor Material Properties on Device Behavior and Circuit Performance: A Comprehensive Review
Abstract: Semiconductor materials play a fundamental role in determining the performance, efficiency, and reliability of modern electronic devices and circuits. This review presents a comprehensive analysis of how intrinsic and engineered material properties influence device behavior and overall circuit functionality. Key parameters such as bandgap energy, carrier mobility, thermal conductivity, and defect density are examined to understand their direct impact on switching speed, power consumption, and operational stability. The paper explores …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 1, 2026 Read article
-
Thermal and Morphological Characterization of Rice Starch–Charcoal Composites for Eco-Friendly Engineering Applications
Abstract: This work focuses on the development and evaluation of rice starch–charcoal–based composite materials to overcome the limitations of natural composites with low thermal properties. In order to examine the impact of filler concentration on thermal and structural performance, eight composite specimens were created by altering the ratios of rice starch and charcoal. TGA, DTA, AFM, SEM, and measurements of thermal conductivity and effusivity were used to thoroughly characterize the composites. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1286–1297 Read article
-
Examining the role of banks in financing nuclear power programs for a green economy and clean energy transition
Abstract: Nuclear power programs have the potential to contribute to deep, multi-sector and economy-wide decarbonization as sources of reliable, low emissions intensity thermal and electrical energy. However, nuclear power projects are complex, capital-intensive ventures with significant financial risks associated with them. Therefore, financing has been a critical issue for these projects. To accelerate their deployment to meet clean energy transition targets of nations and institutions, financial institutions like banks can play …
Published in Journal of Nuclear Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 28–39 Read article
-
Fractional Calculus-Based Analysis of Magneto-Thermal Nanofluid Flow Over Stretching and Shrinking Surfaces
Abstract: This study presents a comprehensive investigation of magneto-thermal hybrid nanofluid flow over stretching and shrinking surfaces using a fractional calculus framework to capture the memory and hereditary characteristics of complex fluid transport phenomena. The proposed model incorporates the effects of magnetic field intensity, thermal radiation, viscous dissipation, Brownian motion, and thermophoretic diffusion on the velocity and temperature distributions within the boundary layer region. A fractional-order derivative formulation is employed to …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 2, 2026 Read article
-
Performance Evaluation of Lithium-Ion Batteries Considering State of Charge and State of Health for Electric Vehicle Applications
Abstract: This study aims to compare temperature-regulated and uncontrolled charging methodologies to determine the most effective approach for optimizing battery performance while minimizing charging duration. The study assesses both constant current (CC) and temperature-controlled pulse charging (TRPC) methods. The battery temperature increases in direct proportion to the applied current during CC charging and cannot be controlled in the absence of external cooling systems. Key performance measures, such as the effect on …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 15, Issue 3, 2025 · pp. 32–47 Read article
-
Thermal Dissipation Performance of Metal–Polymer Composite Heat Exchanger for Enhanced Thermal Management in Compact Electric Geysers
Abstract: Most electric geysers these days are made from all-metal stuff, like stainless steel tanks and copper coils for heating, plus mild steel on the outside. Standby heat losses can be 20 to 40 watts, and a 15-litre unit weighs around 6 to 8 kilograms. Manufacturing costs are higher, too. Hard water makes it worse, with limescale building up on the heating elements and cutting thermal conductivity by 10 to 30 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–651 Read article
-
Thermal-hydraulic Behaviour of Corrugated Pipe Configurations
Abstract: Heat exchangers have a wide range of applications and can be found in a variety of different industries, including chemical reactors, nuclear power plants, and solar energy generation. It is required to do thermal optimization on heat exchangers in order to decrease the size, cost, and energy requirements of the heat exchangers while simultaneously improving their capacity to transmit heat. In these types of businesses, heat exchangers frequently make use …
Published in Journal of Polymer & Composites Read article
-
Thermodynamic Irreversibility in Semen Transport
Abstract: Sperm ejaculation is a vital reproductive process that involves both complex biological functions and energetic mechanisms. Beyond the physiological aspects, thermodynamics offers a framework to analyze energy conversion, exergy use, and irreversibility during sperm activity. ATP provides the main source of exergy for motility, but part of this energy is inevitably lost as heat and entropy generation, reflecting inefficiencies in the process. Because heat regulation directly affects metabolic rates, motility …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 1, 2026 Read article
-
Performance Assessment of External Source-Driven Binary Vapor Cycles with Ammonia-Water and Trans-Critical CO2: The Impact of Reheating and Pressure Variations
Abstract: This study examines the thermodynamic performance of binary vapor cycles, specifically analysing two working fluid combinations: ammonia-water mixtures and trans-critical carbon dioxide (CO2). The study aims to evaluate their efficiency, applicability, and potential for improving energy conversion systems in various thermal applications. The analysis investigates how incorporating reheating processes and adjusting operating pressures impact system performance. These two parameters play a critical role in enhancing cycle efficiency and maximizing energy …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 42–49 Read article
-
Review of Thermal Performance of Solar Air Heaters: Influence of Composite Materials and Advanced Thermal Storage Techniques
Abstract: Solar air heaters (SAHs) are essential devices for capturing solar energy and converting it into heat, finding applications in steam generation, refrigeration, agricultural drying, and space and water heating in residential and commercial environments. However, the thermal performance of SAHs is often limited by the low heat transfer coefficient of air and the absence of solar energy during nighttime, impacting efficiency and reliability. To address these challenges, this study explores …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 488–506 Read article