Search
1685 articles for “Composites”
-
Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Coconut and Snail Shells
Abstract: AbstractParticulate-filled polymer composites are becoming quite attractive because of their low cost and wide applications. In this study, the effects of coconut shell (CS) and snail shell (SS) volume fractions (5–50 vol. %) on the thermal and mechanical properties of unsaturated polyester resin (UPR) composite are investigated. The results show that tensile strength, elongation at break, flexural strength, and hardness of the composite increase as filler concentration increases. However, impact …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 44–56 Read article
-
Exploring the Influence of SS 316L Nanoparticle Integration on the Flexural Strength of PMMA
Abstract: In the present study, a nano composite PMMA was prepared with the help of hot plate magnetic stirring and probe sonication at different loading conditions of nano sized reinforcement material SS 316L. In order to study the effect of independent factors (the amount of reinforcement material, stirring speed, and sonication time) on response variable (flexural strength), the central composite experimental design of response surface methodology (RSM) was utilized. The analysis …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 75–83 Read article
-
Artificial Neural Network Modelling to Optimize Micro-Drilling Parameters of ECDM of Developed Novel Zn/(Ag+Fe)-MMC
Abstract: Several engineering fields have increased their use of metal matrix composites (MMCs) in the past few years. Due to the increase in composites, the demand for accurate machining has also become important. Specifically, pertaining to biomaterial applications, accuracy factor with desired surface finish is critical. While the near-net shape manufacturing process has advanced, MMCs frequently require post-mould machining to achieve surface quality, and dimensional tolerances. In the present study, a …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 01–13 Read article
-
Improvement of mechanical properties for PMMA based Denture material
Abstract: Denture material properties can be improved by various fiber addition. The most often used denture materials are polymethyl methacrylate (PMMA) resins; nevertheless, they do not have a high flexural strength (FS). This investigation compared the mechanical characteristics of an injection-molded polyamide. Deflex, an additional injection-molded PMMA base material, SRIvocap, and a typical compression-molded PMMA (Meliodent). The flexural qualities (deflection, bending strength, and bending modulus) of 100 different denture base materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 155–165 Read article
-
Enhanced Synthesis Methods and Comprehensive Material Response Analysis in Alloy-Infused Nanocomposites
Abstract: This study looks into the most advanced ways to make alloy-infused nanocomposites and how they react to different materials. It focuses on how these nanocomposites can be used to process and make plastics and composites. A lot of people are interested in alloy-infused nanocomposites because they have better mechanical, thermal, and electrical qualities than regular composites. The goal of this study is to improve the methods used for making nanocomposites …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 175–191 Read article
-
Synthesis and Characterization of Short Fiber Reinforced Biocomposite Materials
Abstract: The fabrication and characterization of a biocomposite reinforced with banana fiber is proposed in this proposal. The substance used for the grid was epoxy. Hand-layup preparation was the last step in the biocomposite's manufacturing. Biocomposites with various fiber and grid compositions were produced. After treating banana strands with NaOH in the composites manufacturing process, a comparative analysis between biocomposites reinforced with treated and untreated filaments was conducted. The antacid treatment …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 42–53 Read article
-
Crystalline and Polymeric Interactions in Multi- layered Bulletproof Glass: A Study of Ballistic Resistance and Structural Integrity
Abstract: Bulletproof glass is engineered to withstand high-impact projectiles, offering a critical line of defense in various industries such as banking, military, and armored vehicles. This study explores the structural composition, energy absorption mechanisms, and performance characteristics of bulletproof glass when exposed to ballistic threats. The glass consists of layered constructions, often involving polycarbonate and adhesive interfaces such as polyvinyl butyral, which enhance its energy absorption and resistance to projectiles. The …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 10–17 Read article
-
Gut Feelings: Unravelling the Secrets of the Microbial Universe Within
Abstract: The human digestive system hosts a varied and dynamic community of microorganisms, commonly known as the gut microbiota. This complex community, which includes various organisms such as bacteria, archaea, viruses, and fungi, is essential and important for numerous bodily functions such as metabolism, immune response, and cognitive development. The composition and vast diversity of the gut microbiome are shaped by diet, lifestyle, and genetic factors. Disruptions in this balance, known …
Published in Research and Reviews : A Journal of Immunology · Vol. 14, Issue 3, 2024 · pp. 21–33 Read article
-
Review on the Effect of The Flour on The Quality of Bread
Abstract: Originating from the Triticum aestivum plant, wheat flour is a basic component of diets worldwide and is the basis for bread, a food that is consumed by people everywhere. This study addresses the growing interest in composite flours and alternative grains as a result of health concerns and financial difficulties, while also examining the nutritional and economic value of wheat flour. Summary of the research results on the incorporation of …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 14, Issue 1, 2025 · pp. 10–18 Read article
-
Photocatalysis Unveiled: Fundamentals, Mechanisms, and Material Innovations
Abstract: The Industrial Revolution significantly enhanced living standards but also led to severe environmental degradation, making pollution a critical concern for both developed and developing nations. Photocatalysis, a light-driven chemical process, accelerates thermodynamically demanding reactions, such as photosynthesis, offering a promising alternative for deep solar energy storage. This method also minimizes chemical exposure and reduces environmental pollutants generated by industrial activities. A key advantage of photocatalysis is its ability to replace …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 3, Issue 1, 2025 · pp. 08–18 Read article
-
Integrating Atmospheric Science: Understanding Greenhouse Gases, Aerosols, and Air Quality Dynamics
Abstract: Atmospheric science investigates the Earth’s atmospheric systems to understand their composition, dynamics, and the implications for climate, weather, and air quality. This review explores five primary areas within the field: atmospheric composition, atmospheric modeling, remote sensing, air pollution, and boundary layer dynamics, highlighting critical challenges and advancements. Rising levels of greenhouse gases (GHGs), including carbon dioxide and methane, continue to drive global warming, while feedback mechanisms—like cloud interactions and surface …
Published in International Journal of Atmosphere · Vol. 1, Issue 1, 2024 · pp. 32–35 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
Investigating the Surface Defects and Structural Integrity of 3D Printed Hydrogen Storage Cylinders in UAV Applications
Abstract: This research explores the processing and manufacturing challenges of 3D printed polymer composites for high-pressure hydrogen storage in UAVs. The study focuses on addressing surface integrity and structural robustness issues inherent in additive manufacturing. Finite Element Analysis (FEA) was conducted on four thermoplastic polymer ABS, PET-G, HDPE, and Nylon to assess their mechanical performance under 35 MPa of pressure. Results revealed that PET-G and ABS provided better stress distribution and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 161–191 Read article
-
Stress and Failure Analysis of Hybrid FRP Laminated Tubular Joints
Abstract: Composite tubes have been used in transporting corrosive fluid in petro chemical and paper industries. [Fiber reinforced Polymers] FRP Composite Pipes are even becoming popular in the offshore oil and gas industry. Bonded joints with tubular adherends are finding applications in various piping industry. In the recent times Hybrid Tubular Bonded Lap Joints (HTLJ) have been extensively used to optimize the cost and to enhance the performance of the joint. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 461–471 Read article
-
Polymer-Based Ankle-Foot Orthoses: Innovations in Material Selection and Functional Enhancement
Abstract: Ankle-foot orthoses (AFOs) are critical devices in rehabilitative therapy for patients with foot drop due to neurological disorders such as stroke, multiple sclerosis, and cerebral palsy. These conditions impair dorsiflexion, making walking difficult and increasing the risk of falls. Traditional AFOs, often made from rigid thermoplastics, provide support but limit flexibility and patient comfort. Recent advancements in polymer chemistry have introduced innovative materials that enhance the functionality, durability, and effectiveness …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 49–55 Read article
-
Design and Structural Evaluation of a Dual-Axle Trailer Frame with a Focus on Increasing Strength While Aiming to Reduce Overall Weight
Abstract: The primary objective of this project is to evaluate various cross-sections and materials for the structural frame. The frame includes elongated side components and a central longitudinal member, which is connected to several cross-supports. The design focuses on optimizing both the cross-support layout and the choice of materials, incorporating composites to enhance performance. Load conditions are also altered to achieve improved efficiency. Static simulations are performed using ANSYS, while CATIA …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 2, 2025 · pp. 9–17 Read article
-
Biomedical Applications in Polymer Chemistry Innovations
Abstract: In recent years, polymers and composite materials have been extensively utilized in fabricating electro-mechanical devices for medical applications, including gum massagers for edentulous patients. These devices aid in oral tissue stimulation, improving circulation and overall gum health. This paper explores the application of polymer chemistry in the fabrication of a compact electro-mechanical gum massager designed for edentulous individuals. The device employs biocompatible elastomeric polymers that offer flexibility, durability, and controlled …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 861–868 Read article
-
Epipelic Algae Assemblage and Nutrient Status as Indicators of Pollution in Alice Creek, Rivers State, Nigeria
Abstract: Background and Objective: Alice creek is a tributary of the Sombreiro River, Akuku-Toru Local Government Area, Rivers State, Nigeria, receiving various anthropogenic wastes. The study investigated the species composition, diversity, abundance, and distribution of epipelic algae, and the nutrient status of Alice creek, a tributary of Sombreiro river, Rivers State, Nigeria. Materials and Methods: Epipelic and nutrients samples were collected monthly between February and May 2020 from three (3) stations …
Published in International Journal of Marine Life · Vol. 2, Issue 2, 2025 · pp. 12–20 Read article
-
Critical Review on Basalt Fibre as Reinforcement in Different Applications
Abstract: Basalt fiber (BF), derived from volcanic rocks, has emerged as an attractive reinforcement material due to its remarkable properties, including high strength, stiffness, thermal stability, and eco-friendliness. This review critically examines the applications of BF as reinforcement in various fields, such as civil engineering, aerospace, automotive, and biomedical sectors. The performance of BF-reinforced composites in terms of mechanical, thermal, electrical, and biological properties is evaluated. The challenges and opportunities associated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 670–685 Read article
-
Innovative Polymer Nanocomposites: Bridging Sustainability and Advanced Material Performance
Abstract: This study examines the evolution of bio-based polymer nanocomposites using eco-friendly synthesis methods to improve mechanical, thermal, and barrier properties. It involves the combination of sustainable synthetic polymers with natural polymers in the presence of nanofillers in a green and compatible fashion to generate durable nanocomposites. Optimal alignment of nanofillers with the polymer matrices can be achieved using solvent casting, melt blending, and in-situ polymerization as fabrication methods. Consequently, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1671–1679 Read article