Search
1979 articles for “Chrome moly Alloy Steel 4340 Material” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Design, Analysis and Fabrication of Composite Leaf Spring
Abstract: AbstractNowadays composite materials are one of the materials which are greatly attracting researchers. Reducing weight and increasing or maintaining the strength of materials is getting to be highly important research issue in this modern world. In this paper, design, fabrication and analysis of composite leaf spring have been presented. The objective is to design a composite leaf spring with reduced length and weight as compared to steel leaf spring. The …
Published in Journal of Polymer & Composites · Vol. 2, Issue 3, 2023 · pp. 4–14 Read article
-
Surface Engineering of Materials: A Review Based on Applications
Abstract: Surface characteristics of material play an important role for various applications. Like, there are many applications of the polymeric membranes in the fields of biomedical, filtration, food processing from the past few decades. But various problems have been faced in their applications due to bacterial and non-bacterial contamination on the surfaces. Many researchers have investigated the surface chemistry and roughness of the membranes to identify their properties and the difficulties …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 45–56 Read article
-
Synthesis of PANI/RGO/NiCrO Nanocomposite Material for Charge Storage Application
Abstract: PANI/RGO/NiCrO nanocomposite is synthesized by chemical oxidative polymerization of aniline and Nickel-Chromium Oxide (NiCrO). The prepared PANI/RGO/NiCrO nanocomposite exhibited high specific capacitance of 800 F/g at the scan rate of 5 mV/s, high power density of 1399.44 Wkg-1 and high energy density of 70 Whkg-1. The as-prepared polymer nanocomposites were characterized by X-ray diffraction (XRD) to study crystallinity, Fourier transform infrared spectroscopy (FTIR) to know the functional groups, Transmission electron …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 89–99 Read article
-
Addressing Global Disparities in Prosthetic Mobility: An Experimental Evaluation of Ankle-Foot Orthosis for Sustainable and Efficient Integration with Vehicle Structures and Systems
Abstract: Over the past two decades, the prosthetic foot industry has made significant advancements, greatly enhancing the quality of life for individuals with lower limb amputations in industrialized countries. However, these innovations remain out of reach for many in less developed regions due to high costs, limited durability, maintenance demands, and accessibility challenges. There is an urgent need to develop highly functional, cost-effective, environmentally friendly, and resilient prosthetic feet that can …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 44–52 Read article
-
Harmonic Estimation and its Compensation using D-STATCOM for a Steel Manufacturing Plant
Abstract: Electrical power system having distorted voltage and current waveform generates harmonics. The compensation of the harmonics is greatly required for better performance of the power system. Harmonic is of major concern for the power system containing electric arc furnace (EAF). Since the nature of the arc is highly non-linear and time varying and therefore harmonic analysis becomes important to know the behavior of the power system. This paper presents the …
Published in Journal of Power Electronics and Power Systems · Vol. 11, Issue 2, 2021 · pp. 27–35 Read article
-
Improved Prediction of Fluid Contacts using Calibrated Material Balance Models
Abstract: The demand for oil has been on the high in the recent past and will continue as search for sustainable alternative energy sources intensifies. The exploration and exploitation of oil from subsurface reservoirs have posed several environmental challenges which include flaring and improper water disposal to name a few, caused by excessive production of gas and water. Hence, it is important to establish a reservoir performance monitoring scheme that will …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 25–36 Read article
-
Effect on Welding Parameters on FSW of Aluminium Alloys 7075 T6 with Varying Tool Geometry
Abstract: The present study is to investigate effect of tool pin profile over the friction stir welding of aluminium alloys 7075 T6. The welding process is to be conducted on varying the welding process parameters such as tool rotation speed (rpm), welding speed (mm/min) and tool pin profile. In this work, tensile strength tool rpm increase UTS in FSW joint decease up to certain level, including effect tool rpm on weld …
Published in Journal of Production Research & Management · Vol. 7, Issue 3, 2017 · pp. 27–32 Read article
-
Performance Evaluation of Vegetable Oil Based Cutting Fluids with Extreme Pressure Additive in Turning of AISI 1040 Steel
Abstract: Vegetable oils are being investigated as a potential source of environmental favorable lubricants, due to high biodegradability, renewability and good lubrication properties. The objective of this work is to determine the influence of vegetable oil based cutting fluids (sesame and coconut oil) with extreme pressure (EP) additive on machining performance in terms of cutting forces, cutting tool temperature, tool flank wear and surface roughness during turning of AISI 1040 steel …
Published in Journal of Production Research & Management · Vol. 4, Issue 3, 2014 · pp. 8–14 Read article
-
A RELIABILITY STUDY ON A SYMMETRIC TWO-SPAN I - STEEL BEAM
Abstract: In this paper, a reliability study is carried out on a symmetric two-span I-Section steel beam using the First Order Reliability approach. The ultimate limit state of bending moment, shear stress and local buckling of web were the design criteria considered in the reliability index estimation. A Matlab code was developed based on the performance functions developed for the various failure modes and a Matlab optimizer, fmincon, was invoked in …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 1, 2019 · pp. 18–27 Read article
-
Literature Review on Structures subjected to Material and Geometric Non-Linearity
Abstract: Concrete as a building material has improved tremendously during the last few decades owing to extensive research and development by engineers on and off the field. This improvement is the outcome of the constant quest to make the concrete strong, durable and serviceable along with achieving economy of the structure. These strength and serviceability criteria can be achieved along with economy if the structures are designed keeping in mind all …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 1, 2020 · pp. 17–21 Read article
-
Performance of Offshore Steel Jacket Platforms under Near-source Ground Motion Type Pulses
Abstract: Behaviour of jacket type offshore structures under ordinary ground excitations has already been addressed by a number of researchers. However, their performance under near-source ground excitations has not been particularly addressed in the literature. Records from recent earthquakes, such as the Kobe Japan (1995) and Chi-Chi Taiwan (1999), have revealed that the dynamic excitations in near-source are dominated by a large, narrow band and long period pulse caused by rupture …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 2, 2014 · pp. 17–31 Read article
-
Effect of Silica Fume and Granite Powder on the Ratio of Mode II to Mode I Fracture Energies of Steel Fiber Reinforced Concrete
Abstract: The paper presents the results of an experimental investigation which assesses the effect of silica fume and also granite powder on fracture of steel fiber reinforced concrete under Mode I and Mode II loadings. Tests have been conducted on new notched beam specimens under pure shear (proposed in earlier paper of the authors). The test specimens made from concretes in which partial cement replacement (10%) by (1) silica fume and …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 3, 2014 · pp. 5–14 Read article
-
Dissimilar Joining Of Aluminium Alloy to Copper Using Tungsten Inert Gas Welding Process
Abstract: Aluminium-copper dissimilar joints are applicable to electrical industry. 2 mm thick aluminium alloys (A1100) sheet is joined to 1 mm thick copper (Cu-DHP) sheet using tungsten inert gas welding (TIG) process. The effect of process parameters like heat input, torch orientation, arc weaving on mechanical properties of the joint are studied. In this combination the molten pool generated by melting of aluminium edge will wet the coppersurface to form a …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 2, 2018 · pp. 15–20 Read article
-
Analysis of Pull-in Voltage with Respect to Changes in Dielectric Material and their Thickness
Abstract: Micro Electromechanical Systems (MEMS) actuators experience pull-in effect in their actuation range. MEMS actuating elements are thin parallel plate capacitor electrodes separated with air gap. Parallel plate electrostatic micro actuators are known to have the pull-in effect, where electrostatic attractive force exceeds the mechanical restoring force of the suspending spring, and that the movable plate spontaneously pulled into physical contact with the opposite electrode. In our model the effect of …
Published in Recent Trends in Electronics Communication Systems · Vol. 2, Issue 1, 2015 · pp. 1–5 Read article
-
Optimization of Surface Roughness and Material Removal Rate for Dry Turning Operation in CNC Lathe UsingTaguchi Method
Abstract: In this work the cutting of AISI 1045 material will be carried out using CNC lathe followed by Taguchi methodology. Taguchi method is usedto formulate the experimental layout. A Taguchi L9 design of experiment (DOE) will be applied and the analysis ofvariance (ANOVA) will carried out to determine the effect of process parameters on process performance. To analysethe effect of each parameter on the machining characteristics and to predict the …
Published in Trends in Machine design · Vol. 5, Issue 1, 2018 · pp. 46–53 Read article
-
A Technical review on Solidification cracking behaviour and susceptibility of aluminum alloy weld
Abstract: The paper deals with the physical, chemical properties along with important aluminum applications. Various defects are generated while welding of aluminum alloys one of the severe defect is cracks. Solidification and liquation cracks are generated at various zones of metals. Different mechanical and metallurgical factors affecting the solidification cracking. A variety of weldability tests like Varestraint test, Transvarestraint test, The Cast Pin Tear test, Hot Ductility test, Strain-To-Fracture test, Reheat …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 77–84 Read article
-
Improved Performance Characteristics of A Designed 450 nm True Blue Laser Using InGaN/AlGaN Materials
Abstract: AbstractIn this work, the characteristics of a designed 450 nm true blue semiconductor laser are presented. Performance and optimizations of the designed laser are presented using InGaN/AlGaN active layer materials. A maximum optical output power of the laser is obtained as 147.48 mW for 93 mA injection current and 1 × 10−16 cm2 differential gain, where, the threshold current is 9.3 mA. The modal gain is calculated as 69.774 cm−1 …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 1, 2013 · pp. 24–30 Read article
-
Non-linear Photonic Crystals and their Applications: A Review
Abstract: The nonlinear photonic crystals (NLPCs) are periodic material structures in which nonlinear materials are used for photonic structure formation. In nonlinear photonic crystals, the optical response mainly depends on the intensity of the light beam that propagates through the photonic crystal. These structures show new optical properties with improved or enhanced or new functionalities that cannot be observed in linear photonic crystals. In addition to this, using nonlinear materials in …
Published in Trends in Opto-electro & Optical Communication · Vol. 12, Issue 2, 2022 · pp. 36–39 Read article
-
Pot Holes: Filling of Pot Holes (Problems, Repairs, Material for Filling)
Abstract: The concept of pot holes has come into context since many years. The current techniques and methodology of construction of roads have reached goals of urban transport. Due to current traffic conditions, variation of temperature, weather, water logging, etc. result in cracks or pot holes. Efficient use of techniques, modes of repairs, minimizing the causes of pot holes will help to save huge amount of funds and that can be …
Published in Trends in Transport Engineering and Applications · Vol. 4, Issue 1, 2017 · pp. 31–35 Read article
-
Thermo-Mechanical Behavior and Intelligent Optimization of Contact Temperature During Ultrasonic Vibration-Assisted Single-Pole Magnetic Abrasive Finishing of Zinc Alloy
Abstract: This study proposes a new integration of the experimental analysis, multi-physics finite element modelling (FEM) and machine learning (ML) optimisation of contact temperature (CT) in ultrasonic vibration-assisted single pole magnetic abrasive finishing (UV-SPMAF) of zinc alloy. The three gaps of the research are addressed: (i) The absence of a multi-physics FEM model that can couple electromagnetic, thermal and structural fields for UV-SPMAF of zinc; (ii) No quantified contribution of the …
Published in International Journal of Manufacturing and Production Engineering · Vol. 4, Issue 2, 2026 Read article