Search
113 articles for “micro-hardness test”
-
Study of Microstructural and Mechanical Properties of YSZ and YSZ/Al2O3 Nanopowders Synthesized by Solution Combustion Method
Abstract: AbstractIn the present work different compositions of nanocrystalline tetragonal zirconia stabilized with yttrium oxide (YSZ) have been produced by solution combustion route. Same compositions of YSZ with alumina doping have also been prepared by similar method. The nanopowders obtained are characterized by various characterization techniques like XRD, FTIR, SEM and Wilson Hardness testing techniques. XRD and FTIR analysis confirmed the tetragonal phase of calcined YSZ sample. The particle sizes are …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 19, Issue 2, 2017 · pp. 8–17 Read article
-
Automatic Gas Leakage Detection System
Abstract: This project report presents the design and implementation of a focused automatic gas leakage detection and ventilation system centered on the Arduino Nano microcontroller and the MQ-2 gas sensor. The primary function of the system is to detect flammable gases like LPG, propane, and methane using the MQ-2 gas sensor. This sensor continuously monitors the surrounding air for the presence of these gases. When the gas concentration crosses a predefined …
Published in Journal of VLSI Design Tools and Technology · Vol. 15, Issue 3, 2025 · pp. 29–35 Read article
-
Design and Development of a Mobile Robot for Material Handling
Abstract: A semi-autonomous mobile robot has been designed and developed for regular shaped material handling application. The robot has in-built platform with three revolute joint arms supported by wheeled locomotion. Acrylic polymer sheets are used and three wheeler mobile platforms with various linkages have been fabricated and assembled. Forward kinematic model has been derived after constituting the D-H parameters of the manipulator, and the end-effector position is shown in the work …
Published in Journal of Advancements in Robotics · Vol. 2, Issue 2, 2015 · pp. 1–14 Read article
-
Fabrication and Surface Modified Non-woven Calotropis gigantea Fiber Mat Reinforced Polypropylene Composites by Film Stacking Method
Abstract: Nowadays, there is a growing environmental consciousness and awareness about the need for sustainable development, which has led to growing interest in using natural fibers as reinforcement in polymer composites for synthetic fiber substitution. The current work deals with the effects of Calotropis gigantea fiber (CGF) content and chemical modification of CGF mats by treatment with sodium dodecyl sulfate (SDS) and SDS-pretreated benzoyl chloride on the fundamental properties of CGF-filled …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 10–22 Read article
-
Mechanical Characterization of Green Composite Brake Pads Reinforced with Coconut Shell Waste
Abstract: In the present work, coconut shell powder proposed as a replacement material for the eco-friendly brake linings. The composites for brake pad were developed with other sizes of the coconut shell particles, namely (200 µm, 300 µm, 400 µm and 500 µm) The developed samples were evaluated for morphological, mechanical, physical and worability properties. The SEM micrograph proved that the coconut shell particulates are well dispersed in the composite everywhere …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
HirePrep: A Microservice-Based Integrated Placement Preparation Platform with AI Assistance
Abstract: Preparing for campus placements can be a confusing and time-consuming process. Students have to use different platforms for things like practice tests, study materials, talking to people, and getting updates from the administration. This is not a waste of time, but it also makes it harder for students to be productive and clear about what they need to do when they are getting ready for their careers. To make things …
Published in E-Commerce for Future & Trends · Vol. 13, Issue 1, 2026 · pp. 25–37 Read article
-
Technological Procedure for Recycling of PET Waste to Achieve the Sustainable Environment Concept
Abstract: AbstractIn this research, polyethylene terephthalate bottles (PET) waste were added to styrene-butadiene rubber (SBR) to manufacture road bumps, as a technological procedure for recycling this waste In order to maintain a clean and sustainable environment. Polyethylene terephthalate bottles were cut as grooved strips and added to bump SBR batch with various percentages (0–100 pphr). Mechanical tests were performed before and after the addition of PET waste includes: tensile strength, hardness, …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 7, Issue 2, 2017 · pp. 29–34 Read article
-
Studies on Mechanical, Thermal, Physical Properties and Characterisation of PLA-EVA Blend with Microclay and Product Development
Abstract: PLA-EVA (70:30 wt. %) with microclay (1, 3, 5 wt. %) was also melt blended using Glycerol (1%) was used as compatibilizer in a twin screw compounding extruder. Then test specimens were prepared by an injection molding machine. Mechanical, thermal and physical properties were evaluated. As microclay content was increased, the tensile strength, elongation at break and tensile modulus were slightly decreased but higher than that of PLA-EVA (30 wt. …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 24–33 Read article
-
Experimental Study on Micro Silica Amalgamated High Performance Concrete
Abstract: AbstractIn this paper, an endeavour has been made to swot the effect of micro silica (MS) or silicafume with partial replacement of cement (i.e., 0, 5, 10, 15, 20 and 25%) and also with fullreplacement of natural sand by crusher wash sand (CWS) on strength and durabilityproperties for high performance concrete (HPC) of M50 grade with water cement ratio as0.30. Test results indicate that, the use of MS has improved …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 46–52 Read article
-
Amorphous composite coating’s ability to resist corrosion
Abstract: To increase the mechanical qualities of the coatings, amorphous composite coating was applied to the carbon steel substrate using arc spraying and remelted using a plasma remelting technology. Micro structural microscope, scanning electron microscope, energy dispersive spectroscopy, X-ray diffraction, and microhardness tester were used to examine the composition, microstructure, and characteristics of the composite coating. After the plasma remelting, the microstructure of the composite coatings for amorphous materials was more …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 2, 2022 · pp. 12–16 Read article
-
Investigating The Synergistic Effects of Micro and Nano Particle Reinforcements in Powder Metallurgy-Processed Aluminum Metal Matrix Composites for Enhanced Mechanical Performance
Abstract: The ever-growing demands of modern mechanical applications necessitate the development of materials with superior mechanical properties. In this research, we delve into the creation and evaluation of Aluminum Metal Matrix Composites (Al MMCs) made via the powder metallurgy route, reinforced with both micro and Nano-scale particles. The key aim is to investigate the possible cooperative effects of this dual reinforcement approach on the mechanical behavior of the composite. Traditional aluminum …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 220–229 Read article
-
Parametric optimization of COF of fabricated AA6082/Si3N4/C/Al2O3 composite
Abstract: In the present experimental investigation AA6082/Si3N4/C/Al2O3 composite was successfully fabri-cated using stir casting technique combined with electromagnetic stirrer for wear resistance applica-tions. The produced AA6082/Si3N4/C/Al2O3 composite exhibits improved tribological and me-chanical and properties, according to the experimental results. The generated composite has a micro-hardness range of 60 to 110 HV and an average UTS of 150 to 200 MPa. The tribological perfor-mance was evaluated using a pin on disc tribometer. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 144–152 Read article
-
Experimental Investigation on Concrete with Partial Replacement of Cement by Fly Ash
Abstract: Fly ash is increasingly used as a supplementary cementitious material to partially replace cement in concrete. This paper presents an experimental investigation on the strength properties of concrete with varying percentages of fly ash replacement, from 0% to 25% by weight. The fresh, hardened, and durability properties of high performance concrete with fly ash percentages of 5%, 10%, 15%, 20% and 25% were studied. The test results indicate that 20% …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 1–14 Read article
-
Induction Motor Speed Control Using SCADA
Abstract: Single-phase induction motors are widely used in home appliances and industrial control because of their low cost and rugged construction. Many industrial processes require variable speed drives for various applications. This project investigates the speed control performance of single-phase induction motor using microcontroller AVR ATmega8a. PWM technique has been employed in this inverter to supply the motor with AC voltage. The 4n25 opto-coupler serves the purpose of isolation between the …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 5, Issue 1, 2017 · pp. 15–19 Read article
-
Development of Robot Arm Fingers with Polymer Soft Materials
Abstract: Lightweight soft material applications have attracted attention to Basalt Fiber Reinforced Polymer (BFRP) laminates because of their impressive mechanical characteristics. The impact response and stress-strain behavior of epoxy resin laminates armored with basalt fiber and banana fiber are investigated during this project using computational and experimental approaches. The hand lay-up method was employed to create laminates with a thickness of 3 mm, dimensions of 300x300 mm², and a layout of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 432–439 Read article
-
The Effects of TiC Reinforcement on Thermal, Electrical and Dry Sliding Wear Behaviour of Aluminium Matrix Nanocomposites
Abstract: AbstractThe present work is to investigate the thermal, electrical and dry sliding wear behaviour of a aluminium matrix composite reinforced with dissimilar particle size (≤ 200 nm and 2 μm) of titanium carbide particles. An aluminium matrix composite with 0, 5, 10 and 15 vol.% TiC reinforcement was prepared by using powder metallurgy. A pin-on-disc apparatus was broadly used to investigate the wear behaviour of the Al/TiC nano composites. Wear …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 19, Issue 2, 2017 · pp. 28–41 Read article
-
Growth, Optical, Mechanical and Electrical Properties of Zinc Sulphate Admixtured N-N’-dimethylurea Single Crystals (DMUZS)
Abstract: AbstractThe single crystals of zinc sulphate admixtured N-N’-dimethylurea (DMUZS) were grown by slow evaporation technique from aqueous solution at room temperature. Good quality crystals of size 16×12×5 mm3 had been obtained after 35 days. The grown crystals were characterized by single crystal XRD analysis to determine the lattice constant of the sample. Powder X-ray diffraction studies confirm the crystalline nature of the grown crystal. Fourier transform infrared (FT-IR) studies were …
Published in Research & Reviews : Journal of Physics · Vol. 7, Issue 1, 2018 · pp. 24–33 Read article
-
STUDIES ON MECHANICAL, THERMAL AND PERMEATION PROPERTIES OF HDPE (BLOW GRADE) WITH MICROSILICA CLAY
Abstract: HDPE is widely used in container applications. The mechanical properties and barrier properties can be further improved by the addition of reinforcements like nanoclays. But, however the cost of nanoclays are higher about Rs.5000 – 6000/kg whereas micro silica cost is economical about Rs.450-1000/kg. Hence we used micro silica of 270nm particle size in this project with HDPE blow grade. HDPE (High density polyethylene) was melt blended with micro silica …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 41–53 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article