Search
149 articles for “lamination”
-
Effect of Dry Carbon Fibers on the Mechanical Properties of G801 Carbon Fiber Reinforced Composites
Abstract: The field of fiber-reinforced composite materials has progressed quickly in the last two decades, mainly due to the extreme lightness and superior properties of it, when compared to conventional materials. These materials are progressively being utilized as a part of aviation, automotive, electronics, sporting goods, and numerous other modern applications. In this work, we have fabricated carbon fiber reinforced composites by lay-up procedure in different sequences. This work aims to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 2, 2017 · pp. 1–7 Read article
-
Heat Transfer Analysis Through External Fins by CFD Tool
Abstract: The natural convection heat transfer from the heated vertical plates to air can be enhanced with the amendment in the shape of the plates. One of the methods for increasing the heat transfer is by the use of extended surfaces such as external fins. This study includes the CFD analysis of the heat transfer enhancement through different fins having various shapes and sizes considering both conductive and nonconductive fins. The …
Published in Recent Trends in Fluid Mechanics · Vol. 9, Issue 1, 2022 · pp. 1–12 Read article
-
Progeria Syndrome Unveiled: A Scientific Odyssey into Premature Aging Mechanisms and Therapeutic Frontiers
Abstract: Progeria, or Hutchinson-Gilford Progeria Syndrome (HGPS), is a rare and fatal genetic disorder in childhood, exhibiting features akin to premature aging. Despite normal appearances in infancy, affected children face accelerated aging with distinct facial characteristics, including micrognathia, dental malformations, lower body weight, early hair loss, decreased joint mobility, lipodystrophy, etc. The cause of HGPS is a point mutation that occurs at the exon 11 of the LMNA gene which normally …
Published in Research and Reviews: A Journal of Health Professions · Vol. 14, Issue 2, 2024 · pp. 52–68 Read article
-
Effectiveness of Concrete Retrofitted with FRP Wrapping Subjected to Higher Temperature
Abstract: This work aims to provide additional insight into the behavior of fiber-reinforced polymer (FRP) laminates at high temperatures. The compressive properties of concrete coated in fiber-reinforced polymer (FRP) under elevated heat levels. The study addresses the important issue of assessing the performance of structural elements, specifically concrete columns, in the event of a fire. Recently, there has been increased interest in fiber-reinforced polymer (FRP) composite materials as a possible concrete …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 17–28 Read article
-
Dynamic Mechanical Analysis of Carbon Fiber Reinforced Polymer Composites
Abstract: This study investigates the thermal decomposition and mechanical properties of Fiber-Reinforced Polymer Composites (FRPCs) using Dynamic Mechanical Analysis (DMA). The research focuses on improving the recycling and recovery process of Carbon Fiber-Reinforced Polymers (CFRPs), addressing environmental concerns regarding their disposal. By analyzing the effects of different heating rates (5°C and 10°C per minute) and atmospheric conditions (nitrogen, oxygen, and a combination of both), the study identifies optimal parameters for maximizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 386–393 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Experimental Evaluation of Carbon Fiber Reinforced Epoxy Composites for Structural Applications
Abstract: Composites made of carbon fibre reinforced polymer (CFRP) are currently one of the most widely used material classes in advanced engineering applications because of their remarkable environmental resistance, dimensional stability, and strength-to-weight ratio. The vacuum bag moulding method was used in this study to create CFRP laminates with different fiber-to-resin weight ratios: 50:50, 55:45, 60:40, 65:35, and 70:30. The reinforcement phase was made of unidirectional carbon fibre fabric and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 401–415 Read article
-
Experimental Investigation of Tensile Strength of Bamboo Fiber/Synthetic Glass Fiber
Abstract: In this work, hybrid fiber reinforced composites (HFRCs) with enhanced mechanical and physical characteristics are created by reinforcing composite laminates using a blend of natural bamboo fiber and synthetic glass fiber. The primary goal of the inquiry is to assess these composites' tensile and impact properties. In comparison to non-hybrid composites, the hybrid composite, which consists of two layers of bamboo fiber and one layer of bidirectional glass fiber, had …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1700–1710 Read article
-
Structural Performance Evaluation of Circular Perforated Plates under Mechanical Loading
Abstract: Circular perforated plates are structurally critical components in aerospace, automotive, and marine sectors, where perforation-induced stress concentrations govern failure under mechanical loading. This study conducts a systematic finite element analysis of stress distribution, deformation, and interlaminar behavior in aluminum and glass-epoxy laminates ([−45/45/90/0]S and [−45/45/90/0]AS) under uniform transverse pressure with clamped-free boundary conditions. Four perforation configurations—no hole, central hole, single-series, and 25-hole grid—were evaluated using ANSYS Shell-181, verified against Kirchhoff–Love, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 1–20 Read article
-
Effect of Leading-Edge Roughness on the Aerodynamic Characteristics of the Wind Turbine blade
Abstract: Leading-Edge Roughness (LER) strongly dictates boundary layer transition and performance degradation on an airfoil operating at transitional Reynolds numbers, an aerodynamic regime where shear-layer stability mechanisms remain highly complex. The wind tunnel experiments were conducted to investigate the aerodynamic impacts of surface roughness applied over 25% of the chord of a NACA 0018 airfoil using two discrete roughness gradations. Surface roughness induces an early boundary layer trip, causing elevated section …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 45–52 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Study of Wear Behaviour of GFRP Composites filled with Nanofiller using Taguchi Technique
Abstract: AbstractThe GFRP laminates are fabricated by hand lay-up process followed by vacuum bag curing and post cured in a heating oven. The laminates are fabricated with addition of 1%, 1.5% and 2.0% graphene filler and prepared laminates are cut into ASTM standards by using water jet cutting. The density and volume fraction of the void fabricated composite is determined. The three-body abrasive wear test is carried out on abrasion tester …
Published in Recent Trends in Fluid Mechanics · Vol. 5, Issue 3, 2018 · pp. 33–38 Read article
-
Alveolar Cysts in a Newborn Infant: A Case Report
Abstract: Cystic lesions of transient nature through Epstein pearls, Bohn’s nodules and dental lamina cysts are frequently found in the oral cavities of newborn infants. These cysts arise from the developing dental tissues or from their remnants. Alveolar cyst is also known as gingival cyst of newborn or dental lamina cyst. This cyst presents as a benign oral lesion which is whitish-yellow in color present on the alveolar ridge of newborns …
Published in Research and Reviews: A Journal of Dentistry · Vol. 8, Issue 3, 2017 · pp. 26–28 Read article
-
Thermal Analysis of Isotropic and Orthotropic Plate by Trigonometric Shear Deformation Theory
Abstract: In the present study, a sinusoidal shear and normal deformation theory taking into account effects of transverse shear as well as transverse normal is used to develop the analytical solution for the bidirectional bending analysis of isotropic, transversely isotropic, laminated composite and sandwich rectangular plates. Governing equations and boundary conditions of the theory are obtained using the principle of virtual work. The Navier solution for simply supported laminated composite plates …
Published in Journal of Geotechnical Engineering Read article
-
Simulation of Flow Vorticity and Instability Analysis in a Solid Rocket Motor
Abstract: Combustion instability is a major problem in most solid rocket motor (SRM) during its operation. More form of instability is generated due to several factors like coupling of combustion acoustic waves with flow dynamics, grain configuration, combustion chamber design, combustible mixture, etc. This type of flow turbulence is sustained in such system for long durations and leads to failure of the mission. In this paper, an effort has been made …
Published in Journal of Experimental & Applied Mechanics Read article
-
Flexural Strength and Drilling Parameter of Natural Fiber Composites with Usage of Epoxy Resin
Abstract: An attempt that has been made to take use of the advantages offered by natural composite materials in light of the fast advancement of research and development in this field over the course of the previous two decades, from the laboratory to the factory floor. During the manufacturing process of laminates, polymer matrices are used, while cotton, jute, and sisal are utilised as reinforcing materials. Epoxy resin is used to …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 37–45 Read article
-
Crystalline and Polymeric Interactions in Multi- layered Bulletproof Glass: A Study of Ballistic Resistance and Structural Integrity
Abstract: Bulletproof glass is engineered to withstand high-impact projectiles, offering a critical line of defense in various industries such as banking, military, and armored vehicles. This study explores the structural composition, energy absorption mechanisms, and performance characteristics of bulletproof glass when exposed to ballistic threats. The glass consists of layered constructions, often involving polycarbonate and adhesive interfaces such as polyvinyl butyral, which enhance its energy absorption and resistance to projectiles. The …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 10–17 Read article
-
Comparative Study of Mechanical Properties of Sisal/Epoxy, Fiber/Glass Epoxy, Sisal/Fiber Glass/Epoxy Composites
Abstract: The rate at which non-renewable resources are consumed increases, the research of using eco-friendly and sustainable materials has been in the spotlight lately. The companies from different industries are trying to find replacements for traditional synthetic materials to limit their environmental impact and promote sustainable eco-friendly initiatives. One such approach is the usage of natural fiber polymer composites as it provides a biodegradable and renewable structural alternative over traditional synthetic …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–11 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Effect of Fiber Weight Fraction on the Mechanical Performance of Calotropis Gigantea Fiber-Reinforced Polyester Composites
Abstract: Natural fiber-reinforced composites have attracted more attention as environmentally friendly substitutes to synthetic materials since the move towards a sustainable approach to engineering materials has gained in popularity. This paper focuses on the potential use of Calotropis gigantea (CG) stem fibers as laminate reinforcement with bio-composites made through an unsaturated polyester resin (GP) system. Super strength fibers were pulled out, treated with alkaline to boost interfacial adhesion, and positioned in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 339–349 Read article