Search
111 articles for “XRD results.”
-
Green Fabrication of Glutaraldehyde-Crosslinked Chitosan/PVA Biocomposite for Heavy Metal Removal from Wastewater
Abstract: Chitosan (CS) and Polyvinyl alcohol (PVA) are polymers that possess biodegradable, biocompatible, and non-toxic properties, making them suitable for wastewater treatment applications. The primary objective of this research is to chemically modify chitosan in a novel manner to enhance its ability to remove hexavalent chromium Cr(VI) from aqueous solutions. In this study, a composite material was synthesized by crosslinking PVA and CS with glutaraldehyde (GA), resulting in the formation of …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 59–83 Read article
-
Fabrication and Assessment of Tribological Performance of Nickel-Graphene-MXene Hybrid Nano-composites
Abstract: As industries such as aerospace, automotive, defence, and electronics demand materials with superior wear resistance, high strength, and thermal stability, traditional metals are reaching their performance limits. Hybrid nanocomposites offer a pathway to meet these stringent requirements. In this study, novel Nickel-Graphene-MXene hybrid nanocomposites were fabricated using a powder metallurgy route, incorporating varying weight percentages (up to 2 wt.%) of MXene and 1 wt.% graphene nanosheets into a nickel matrix …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 780–798 Read article
-
THE THICKNESS EFFECT ON TiO 2 THIN FILMS FABRICATED BY USING SOL- GEL DIP COATING METHOD
Abstract: Titanium dioxide films were prepared by sol-gel dip-coating technique onto glass substrates at room temperature. The study focuses on the structural pattern of TiO 2 films which were dominated by the parameters such as the film thickness, pH, annealing temperature and number of dipping layers. At first the dipping speed is optimized with the refractive index of the film along with the number of dipping layers. Then the film deposited …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 1–10 Read article
-
Comparative Evaluation of the Pozzolanic Activity of Artificial Pozzolans: Steel Slag, Fly Ash, and GGBFS
Abstract: Evaluating the pozzolanic activity of specific industrial waste is crucial given the growing demand for cementitious materials. This research aims to expand the possibilities of incorporating pozzolanic waste such as Steel Slag (SS) as additives to cement. SS is a byproduct of the steel production process. A byproduct of the steelmaking process, slags have long been used as aggregates in building materials like concrete and roads. A closed-loop structure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 341–361 Read article
-
Optimization of Direct Ink Writing Process Parameters for Liquid Silicone Rubber/TiO2 Composite Ink
Abstract: The purpose of this research is to develop and optimize the Liquid Silicone Rubber (LSR)/Titanium Dioxide (TiO₂) composite inks in Direct Ink Writing (DIW)-based 3D printing systems. The primary research objective was to use enhancement of mechanical, rheological, and dielectric characteristics of LSR using TiO₂ reinforcement but still retain extrusion stability and dimensional consistency. TiO₂ content (0, 5, 10, and 15 wt%) and catalyst and glycerol ratios were regulated and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 240–259 Read article
-
Polymer Waste-Derived Activated Carbon from PET for High-Efficiency Supercapacitor Electrodes
Abstract: The exponential increase in plastic waste, particularly Polyethylene Terephthalate (PET)—a polymer characterized by its repeating aromatic terephthalate units and ester linkages—has escalated into a global environmental crisis. This study details a low-cost synthesis of porous carbon materials derived from waste PET via pyrolysis followed by chemical activation with calcium hydroxide (Ca(OH)2). During pyrolysis, the PET polymer chains undergo thermal degradation, where the aromatic rings in the backbone serve as precursors …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1419–1447 Read article
-
Chemical Synthesis of Zinc Oxide Nanoparticles and Characterization
Abstract: Chemical precipitation method was followed to synthesize zinc oxide nanoparticles. Zinc acetate and ethylene glycol were used in the preparation, and polyvinyl alcohol was also used along with zinc acetate to control the size and morphology. The precipitated particles were subjected to oxidation. The ZnO nanoparticles were characterized by analytical methods like XRD, FTIR, DLS, AFM, SEM and TEM. ZnO nanoparticles had crystal-like structures with size range of 6.17 to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 14–20 Read article
-
Gamma- and Electron Beam-Induced Crystalline modification in Poly (Lactic Acid): Effects of Radiation Dose and Dose Rate
Abstract: Poly(lactic acid) (PLA) is an important commercial biodegradable polyester whose properties are dictated by its molecular architecture and semicrystalline nature. The application of ionizing radiation particularly gamma rays and electron beams is extensive for sterilization and materials processing. The effect of ionizing radiation on the crystallinity of PLA is complex however, since irradiation causes concurrently chain scission, radical formation, oxidation, recombination and mobility driven structural reorganization. This work studies the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article
-
Engineering Novel Blue Emissive Thiazolidinedione (TD) Poly Lactic Acid (PLA) Composite Thin Films for Bioplastic Scintillation
Abstract: In this article, we demonstrate luminescent properties of PLA blended with new 3-[2-(4-methylphenyl)-2-oxoethyl]-5-(thiophen-2-ylmethylidene)-1, 3-thiazolidine-2, 4-dione and 3-[2-(4-chlorophenyl)-2-oxoethyl]-5-(thiophen-2-ylmethylidene)-1, 3-thiazolidine-2, 4-dione (TD). This paper mainly aims at the preparation of intercalated thin films of PLA and TD. The formation of matrix-dopant composite films was confirmed by FTIR, SEM, TGA, DSC and XRD characterizations. This work really stands out from our previous work as TD has been better recognized as drug material in …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 10–23 Read article
-
Preparation of Phase – Pure Nanocrystalline Anatase and Rutile TiO2 using Hydrolysis of TiCl4 in presence of surfactants
Abstract: Hydrolysis of TiCl4 was carried out in two different ways to prepare nano crystalline TiO2. In the first method the hydrolysis of TiCl4 was carried under high acidic conditions at low temperature. In the second method hydrolysis was carried out using (NH4)2SO4 as an additive. It can be seen that the hydrolysis of TiCl4 under high acidic conditions promotes the growth of rutile phase of TiO2, where as hydrolysis in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 1, 2018 · pp. 31–40 Read article
-
Preparation and Characterization of TiO2 Nanoparticles by Green Method
Abstract: In this study, we attempted to synthesize TiO2 nanoparticles utilizing titanium tetrachloride as a precursor and an aqueous extract of Sansevieria plant leaves. Atomic force microscopy (AFM), X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and Brunauer-Emmett-Teller (BET) analysis were used to identify the synthesized TiO2 nanoparticles As per the surface topography, the average diameter of nanoparticles is considered as 67.73 nm. Debye-Scherrer equation was …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 61–67 Read article
-
Development and Characterization of Pseudo-Elastic Ternary Cu-Al-Be Shape Memory Alloy and Its Scope as Shape Memory Hybrid Composites
Abstract: This research investigated the potential of the Cu-11.95Al-0.51Be shape memory alloy (SMA) for vibration damping applications. This specific composition of the alloy was selected to ensure the presence of the austenite phase (ß-phase) and to evaluate the pseudo-elastic (SE) behavior. This research explores the design, fabrication, and characterization of a pseudo-elastic ternary alloy. The key parameters examined in this study were the alloy phase and pseudo-elastic behavior. Other important factors, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 370–385 Read article
-
Synthesis, Characterization and Dielectric Properties of Polymer Materials for Microwave Communication Applications
Abstract: The rapid advancement in wireless communication technologies has necessitated the development of advanced materials with tailored dielectric properties. Polymer materials, because of their flexibility, lightweight nature, and processing ease, are currently being used in initiatives to formulate low-dielectric materials specifically tailored for microwave communication applications. In the current investigation, the authors concentrate on the synthesis, characterization, and dielectric properties of five distinct novel polymer materials. The synthesized polymers are characterized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1482–1495 Read article
-
Green Synthesis of Silver Nanoparticles Using Ficus Religiosa Linn Leaf Extract
Abstract: Nanotechnology is always a promising field for many new technological innovations. Turning Chemical process green also gains more attention of researchers due to high environmental concern. The process that involves ecofriendly procedures, use of less toxic solvents, less toxic byproducts, use of cheaper raw materials are all becoming ever increase in demand for current research scenario. Plants especially those having medicinal properties are beneficial for synthesizing nanoparticles as it will …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 2, 2021 · pp. 45–52 Read article
-
Electrochemical Exfoliation of Graphene Oxide (GO) and Thermally Reduced Graphene Oxide (TrGO) Using Ecofriendly Reducing Agent as Cow Urine
Abstract: The Graphene oxide (GO), the reduced form of GO i.e. (rGO) with thermally reduced graphene oxide (TrGO), have concerned significant interest in various fields with their exceptional properties. We investigate the electrochemical exfoliation processes of GO and rGO to understand their structural and electrochemical behavior of GO and TrGO through various characterization techniques. The electrochemical exfoliation method offers a versatile and scalable approach for the mass fabrication of the materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 89–100 Read article
-
Red emissive MSA capped CdTe quantum dots for cell imaging
Abstract: The changes in the optical and electronic properties of the materials due to the quantum confinement effect in semiconductor nanoparticles have attracted huge interest in the scientific community. Within the semiconductor nanoparticles, the quantum dots (QDs) deserve a special position due to their high quantum confinement effect and unique optoelectronic properties. Among the semiconductor quantum dots, CdTe attracts more attention due to its easy manufacturing, large Bohr exciton radius, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 716–721 Read article
-
Bismuth's Doping Effect on Organic Non linear Optical Materials
Abstract: Using the method of slow evaporation solution growth, single crystals of pure and bismuth-doped urea were produced. Many interesting results on several properties of Bismuth fluoride impurity added to Urea single crystals have been observed and studied. The different morphology of bismuth doped urea crystals was noticed. By using FTIR analysis, the functional group's existence has been approximated. The generated crystals' lattice properties were examined using the single crystal X-ray …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 3, 2023 · pp. 17–24 Read article
-
Gamma Irradiation Effects on Structural and Optical Properties of PVA/Al₂O₃/TiC Polymer Nanocomposites for Optoelectronic Applications
Abstract: PVA/TiC/Al2O3 nanocomposite (PTA) films were successfully prepared via the solution casting method. The impact of high-dose gamma (γ) irradiation (30 kGy) on the structural and optical properties of PVA/TiC/Al2O3 nanocomposites was systematically explored using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and UV–Visible spectroscopy. XRD analysis confirmed the semi-crystalline nature of the nanocomposites, which was found to decrease upon incorporation of Al₂O₃ nanoparticles and exposure to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 717–729 Read article
-
Structure-Property Correlation in PTT/PP Blends with Improved Mechanical Performance
Abstract: The present work investigates a series of poly (trimethylene terephthalate) (PTT)/polypropylene (PP) blends prepared with varying PP concentrations in order to improve the overall performance of PTT, particularly with respect to mechanical properties and processability. PTT is a promising engineering thermoplastic owing to its balanced stiffness, resilience, and chemical resistance; however, its relatively high cost and processing limitations often restrict its wider application. In this context, blending with PP offers …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 90–98 Read article