Search
81 articles for “X-ray Diffraction (XRD)”
-
Gamma Irradiation Effects on Structural and Optical Properties of PVA/Al₂O₃/TiC Polymer Nanocomposites for Optoelectronic Applications
Abstract: PVA/TiC/Al2O3 nanocomposite (PTA) films were successfully prepared via the solution casting method. The impact of high-dose gamma (γ) irradiation (30 kGy) on the structural and optical properties of PVA/TiC/Al2O3 nanocomposites was systematically explored using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and UV–Visible spectroscopy. XRD analysis confirmed the semi-crystalline nature of the nanocomposites, which was found to decrease upon incorporation of Al₂O₃ nanoparticles and exposure to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 717–729 Read article
-
Effect of Gamma and Electron Beam Irradiations on Crystalline and Gelatinization Properties of Edible Potato Starch
Abstract: Exposure of food material to radiation causes changes in crystalline (damage of crystal structure / lattice distortion), and gelatinization (digestive)properties. Potato starch (PS) is one of the important globally used food supplement in different forms like chips, curries, cusins etc. During its use the PS is exposed to radiations, altering its molecular structure (due to chain cleavages) and bring changes in structural and physical properties ; sometimes ill – effects …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 113–127 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article
-
Fabrication and Comparative Study of Synthetic and Eggshell Waste Derived Hydroxyapatite-Based Composites for Biomedical Applications
Abstract: Hydroxyapatite is widely used as a bioceramic material in orthopedic and dental field because of its exceptional biocompatibility and bioactivity. Hydroxyapatite (HAp) doped with several mineral ions has been frequently reported to further enhance its bioactive nature. Several studies indicate that biological waste materials can serve as calcium sources for hydroxyapatite synthesis, with eggshells being one such promising source. In the present work, two types of hydroxyapatite were synthesized: pure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 33–46 Read article
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Valorization of Human and Cattle Dental Waste into Functional Composite Biomaterials: A Detailed Comparative Analysis
Abstract: This study investigates the conversion of human and cattle (goat and cow) teeth into bioactive hydroxyapatite-based composites and presents a detailed comparative evaluation of these biogenic materials with laboratory-synthesised (synthetic) hydroxyapatite (HAp). In this work, hydroxyapatite was extracted from human and bovine teeth through controlled calcination and milling, while synthetic HAp was prepared using a standard wet chemical precipitation route. All materials were subsequently sintered at 900 °C and fabricated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 340–354 Read article
-
Polymer-Mediated Electron Transfer in Eco-Friendly P3HT–rGO Nanocomposites for Optoelectronic Applications
Abstract: Conducting polymer–graphene hybrid nanocomposites have emerged as promising materials for next-generation optoelectronic applications owing to their solution processability, tunable interfacial properties, and mechanical flexibility. Recent studies have highlighted the importance of graphene–polymer hybrid systems in enhancing charge transport pathways, exciton dissociation efficiency, and interfacial stability in organic optoelectronic devices. Despite these advantages, a key challenge remains the efficient production of individual graphene sheets through the reduction of graphene oxide using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 413–423 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
Hybrid Polymer Composites Reinforced with Coconut Shell Fillers and Silica Fume: Synergistic Effects of Industrial By-Products : A Comprehensive Review
Abstract: The increasing requirement of sustainable and high-performance engineering materials has led to increased research in hybrid polymer composites comprising sustainable fillers in the form of renewable biomass or industrial by-products. Among the various bio-fillers that exist, coconut shell filler is gaining much prominence due to its low density, high content of lignin, hardness, and abundance as agricultural waste. Another industrial by-product that is rich in amorphous silica and possesses high …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Unraveling Mixed Ionic-Electronic Conduction in Lithium-Substituted Rubidium Tetra Titanates via Dielectric Spectroscopy and EPR Analysis
Abstract: Lithium-substituted Rubidium Tetra Titanates with varying concentrations of lithium carbonate (Li₂CO₃) — specifically 0.01, 0.05, and 0.1 molar percentages — were successfully synthesized using a conventional high-temperature solid-state reaction method. The resulting compounds follow the general chemical formula Rb₂₋ₓLiₓTi₄O₉. X-ray diffraction (XRD) analysis confirmed that lithium ions were successfully incorporated into the crystal lattice without disrupting the fundamental layered structure of the host material. The crystal system remained monoclinic across …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 2, 2025 · pp. 19–29 Read article
-
Structure-Property Correlation in PTT/PP Blends with Improved Mechanical Performance
Abstract: The present work investigates a series of poly (trimethylene terephthalate) (PTT)/polypropylene (PP) blends prepared with varying PP concentrations in order to improve the overall performance of PTT, particularly with respect to mechanical properties and processability. PTT is a promising engineering thermoplastic owing to its balanced stiffness, resilience, and chemical resistance; however, its relatively high cost and processing limitations often restrict its wider application. In this context, blending with PP offers …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 90–98 Read article
-
In-Situ Polymerized GO/PANI Composites: Structural Evolution, Optical Modulation, and NH₃ Sensing at Room Temperature
Abstract: Graphene oxide (GO)/polyaniline (PANI) composites with varying PANI contents (20, 40, and 60 wt%) were synthesized via in-situ oxidative polymerization and systematically investigated for their structural, morphological, optical, and gas-sensing properties. X-ray diffraction (XRD) confirmed a progressive increase in interlayer spacing and partial exfoliation of GO layers with increasing PANI content, indicating intercalation-assisted hybridization. Fourier transform infrared (FTIR) spectroscopy revealed the characteristic vibrational bands of both constituents and confirmed strong …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Synthesis and Structural Characterization of Nanocrystalline CeO2 and Ce0.95Cu0.05O2 Solid Solution Catalysts Properties and its Applications
Abstract: The Main study and the development of CeO2 and Cu doped CeO2 nanocrystals containing transition-metal species are of crucial importance for understanding the preparation and fabrication of CeO2 and Cu doped CeO2 nanoparticles by solution combustion technique to taken glycine as fuel. Here, we have investigated the effect of Cerium dioxide and Cu dopant ions on the structural properties of Ce1-xCuxO2 nanocrystals (NCs) synthesized via co-precipitation technique. XRD results confirmed …
Published in Journal of Catalyst & Catalysis Read article
-
Geotechnical Influence Factors in Empirical Design of Highway Pavement: The A123 Ilorin – Lokoja Highway, Nigeria Case Studies
Abstract: Site investigation and application of geological and geotechnical influence factors on the highway were investigated. Method involved field sampling, geotechnical laboratory and x-ray diffraction analysis and use of SRTM extracted slope and drainage parameters; and their integration in a GIS based multi-criteria decision analysis to derive a subgrade suitability map as a design tool. The suitability criteria classified the highway into four (4) design sections. Section one for very low …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 53–70 Read article
-
Red emissive MSA capped CdTe quantum dots for cell imaging
Abstract: The changes in the optical and electronic properties of the materials due to the quantum confinement effect in semiconductor nanoparticles have attracted huge interest in the scientific community. Within the semiconductor nanoparticles, the quantum dots (QDs) deserve a special position due to their high quantum confinement effect and unique optoelectronic properties. Among the semiconductor quantum dots, CdTe attracts more attention due to its easy manufacturing, large Bohr exciton radius, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 716–721 Read article
-
Nanocrystalline Silver: Synthesis by High-Energy Ball Milling, X-ray Debye Temperature Analysis, and Diverse Applications
Abstract: This research paper presents a comprehensive investigation into transforming micro-sized silver (Ag) powder into nanostructured Ag powder by applying high-energy ball milling. The ball milling process was executed over a total duration of 20 hours, with periodic sampling every 4 hours to monitor the evolving characteristics of the material. The particle size, lattice strain, Debye-Waller factor, and root mean square amplitudes of vibration were calculated by using X-ray powder diffraction …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 140–148 Read article
-
Evaluation of Inhibition Effect of Nanohybrid Curcumin (Cur-ZnO) and Cur-free Against Some Types of Bacteria
Abstract: This study aimed to prepare an efficient nanohybrid food preservative by loading curcumin on zinc oxide. The prepared compound was characterized using microscopy and spectral methods. Fourier transform infrared spectrum of the nanohybrid curcumin showed a shift in the frequencies of some chemical groups towards high and low frequencies. X-ray diffraction (XRS) spectrum also revealed the emergence of new diffraction planes in the nanohybrid compound, Compared with the carrier spectrum …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 68–79 Read article
-
Preparation and characterization of High-performance ZnO/PVB Nanocomposite films for UV-shielding and Optoelectronics
Abstract: Zinc oxide nanoparticles can be incorporated into polymer matrices to create materials for various high-performance engineering applications. In this study, zinc oxide nanoparticles were reinforced at different loadings (0.5, 1.0, 0.5, 1.0, 1.5, and 2.0 wt.%) in polyvinyl butyral matrix to synthesize nanocomposite films using the solution casting method. The impact of zinc oxide nanofiller on the morphology and ultraviolet-shielding performance of polyvinyl butyral nanocomposite films was evaluated using various …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 3, 2025 · pp. 35–53 Read article