Search
162 articles for “Surface coatings”
-
Advanced Coating Techniques: Improving Metal Longevity through Nanocomposite Applications
Abstract: In order to protect metal and lessen wear and tear, this topic has scriptive issues pertaining to coatings that are applied to metal surfaces. Components in slurry pumps have better wear and abrasion resistance compared to their surface properties. An interface region has been used to separate at least two immiscible phases in the material that makes up a nanocomposite coating. Fillers have become a major constituent of the matrix, …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 3, 2024 · pp. 01–08 Read article
-
Nanostructured Cr-WS2 Solid Lubricant Coating for Space Applications
Abstract: Abstract Tungsten disulphide (WS2) is one of the widely used intrinsic low friction materials, which is commonly used in the form of coating. WS2 offers very low coefficient of friction only in non humid conditions. Presence of humidity destroys this property and restricts its utility. Modifying the structure of WS2 by adding certain metals helps in overcoming this limitation and in addition improves the mechanical properties. Further, deposition technique and …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 1, 2019 · pp. 12–18 Read article
-
Performance Enhancement of COC-Modified LLDPE Films: Optimization of Stiffness, Tear Resistance, and Barrier through Plasma Surface Modification
Abstract: This study explores the development of high-performance packaging materials by blending commodity Linear Low-Density Polyethylene (LLDPE) with engineering cyclic olefin copolymer (COC) as a performance modifier. To leverage the processability of LLDPE alongside the structural rigidity of COC, blends were prepared at various weight ratios (95/05, 90/10, 85/15, and 80/20) using twin-screw melt extrusion, followed by the production of films and sheets via blown film extrusion and compression molding. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 128–143 Read article
-
Development and Performance Evaluation of GO–ZnO/PU Hybrid Nanocomposite Coatings for Improved Optical Transmission, Cooling, and Self-Cleaning in PV Systems
Abstract: The performance of solar photovoltaic (PV) modules with time is affected by thermal heating, dust buildup, and exposure to ultraviolet (UV) light; as a result, the power loss increases rapidly during the use condition. In this study, a polyurethane (PU) nanocomposite, fabricated with graphene oxide and zinc oxide (GO–ZnO), is invented and examined. Improvements in heat management, light transmission, and dirt resistance are planned for PV glass surfaces. The nanocomposite …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 243–249 Read article
-
Effect of Corrosion on Flexural Strength of Reinforced Concrete Beam: An Experimental Study
Abstract: AbstractThe main aim of this experimental study is to investigate the effect of corrosion on reinforced concrete beams, particularly on load deflection behavior, load carrying capacity and crack width by using with or without epoxy coating on the steel surface. Accelerated corrosion technique was adopted to corrode the beam experimentally. The corrosion was measured using the Open Circuit Potential (OCP) measurement instrument. A total of 14 simply supported beam specimens …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 1–7 Read article
-
Studies on Nanostructured Nickel Thin Film Coatings Deposited using Pulsed DC Magnetron Sputtering Process
Abstract: The purpose of this research work is to investigate the mechanical properties of nickel thin film. The nickel thin films were coated on glass substrate using pulse PDC power supply magnetron sputtering process in argon atmosphere. The effect of substrate temperature, effect of duty cycle and mechanical properties of nickel thinfilms has been presented in this paper. Coating deposited with substrate temperature at 250°C, had lower surface roughness (Ra<3 nm) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 1, 2015 · pp. 8–14 Read article
-
An Overview: Design of Nanocomposite Coatings
Abstract: The call for high productivity, quality in machined surfaces, and reduced machining costs have put a demand on the improved cutting tools. The recent advancements in development of nanocomposite coatings which consist of crystalline and amorphous phase have made dry machining at high speeds with quality in machined parts a reality. The driving force behind the super hard structure of such coatings is phase segregation mechanism. In this work, a …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 3, 2015 · pp. 1–4 Read article
-
A Comprehensive Analysis of Coating Technology and Thin Films
Abstract: In contemporary materials science, thin film and coating technologies are essential because they allow for the improvement of surface characteristics, including electrical conductivity, hardness, corrosion resistance, and optical performance. These technologies use physical, chemical, or hybrid deposition techniques to deposit materials in layers that range in thickness from a few nanometres to several micrometres, depending on the required functional properties and application areas. The content, thickness, and microstructure of films …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 50–64 Read article
-
Thermal Spray Coating an alternative coating solution in place of The Traditional Hot Dipped Galvanizing Process in Present Industrial Scenario
Abstract: In present scenario the Thermal Spray Coating is prestigious alternative solution to replace traditional Hot Dipped Galvanizing Coating as an alternative solution for new and existing structures in industries and offering a range of benefits for long durability and maintenance free solution for more than 25 years in service. There is no weld life for site application in case of Hot Dip Galvanized Structure and may customers have issue with …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 3, 2024 · pp. 08–15 Read article
-
Protective Coatings for High-Temperature Applications: Challenges and Innovations
Abstract: High-temperature environments impose significant challenges on materials used in a variety of industrial applications, where components are exposed to extreme heat. These environments can cause a range of issues, including material degradation through processes like corrosion, oxidation, and thermal cycling, which can severely limit the performance, durability, and overall lifespan of components. Over time, these issues may lead to component failure, increased maintenance costs, and even unplanned shutdowns in industrial …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 1–9 Read article
-
Experimental Analysis of Residual Stress, Micro-Hardness and Corrosion Behavior of HVOF Sprayed Composite Coating
Abstract: The utilisation of non-traditional composite coating materials, enhanced lubrication, and surface geometry optimisation have all contributed to the tribological performance. Piston rings are among the most crucial engine parts since friction causes between 40 and 45 percent of all energy loss. Fuel efficiency, power loss, and exhaust pollutants are all strongly impacted by the piston assembly's tribological performance. The present study's primary goal was to develop composite coating by using …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 77–82 Read article
-
Analyzing Cavitation in Marine Propeller: A Computational Approach with Consideration for Polymer Applications
Abstract: A major source of noise and blade damage in marine propellers is because of the phenomenon of hydrodynamic cavitation. The Computational Fluid Dynamics (CFD) analysis approach is employed for the prediction of the cavitating propeller’s performance characteristics under various conditions of operation with the advance coefficient (J) ranging from 0.55 to 0.91 and cavitation number (σ) in the range of 0.80 to 4.50. The numerical simulation is performed on INSEAN …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 29–44 Read article
-
Factors to Increase the Efficiency of Solar Panel: A Review
Abstract: Abstract This paper represents a review on the factors which affect the efficiency of solar panels as a challenge for the modern technology. The limitations of fossil resources and enormous increasing demand for energy have directed our ways to focus our minds towards solar energy, as it is freely available ample source of sunlight to us which can be effectively used for converting it into electricity and enlighten those areas …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 9, Issue 1, 2019 · pp. 13–21 Read article
-
Development of Multilayer Metallic Coatings with Graded Interfaces for Enhanced Wear and Fatigue Resistance in Aerospace Components
Abstract: This study presents a comprehensive investigation into the development and characterization of multilayer metallic coating systems with compositionally graded interfaces, specifically engineered to enhance wear and fatigue resistance in aerospace structural and rotating components. Four coating architectures were systematically designed: (i) CrN/TiAlN bilayer, (ii) TiN/TiAlN/TiAlSiN gradient trilayer, (iii) CrAlN/AlCrN nanolaminate, and (iv) a novel five-layer CrN–TiN–TiAlN–AlCrN–TiAlSiN functionally graded system (FGS). Coatings were deposited via high-power impulse magnetron sputtering (HiPIMS) and …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 50–67 Read article
-
Electrooxidation of Methylene Blue over nanoparticle coated DSA synthesized by sol-gel method
Abstract: The current study uses the sol-gel approach to synthesize a new Dimensionally Stable Anode (DSA) covered with nanoparticles. The objective is to enhance the electrocatalytic activity and overall performance of the anodes in treating synthetic industrial wastewater containing reactive dyes. CuO and TiO2 nanoparticles are coated using a thermal decomposition technique on a titanium electrode. The DSA surface gains more surface area and better catalytic capabilities when nanoparticles are coated …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 2, 2024 · pp. 34–43 Read article
-
Next-Generation Catalysts: Enhancing Efficiency and Selectivity in Chemical Reactions
Abstract: This study investigates the fundamental principles of coatings and their rejuvenation mechanisms, focusing on the development of advanced coatings that not only protect but also restore the performance of degraded surfaces. The article delves into the various types of coatings, including organic, inorganic, and hybrid formulations, emphasizing their distinct characteristics and applications. A significant portion of the study is dedicated to the mechanisms of rejuvenation, where we analyze how specific …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 3, 2024 · pp. 24–28 Read article
-
Application of Thermal Spray Coatings for Corrosion Control in Oil and Gas Refineries
Abstract: In today’s context, Thermal Spray Coating (TSC) has emerged as a highly durable and reliable alternative to traditional Hot-Dip Galvanizing (HDG). It is increasingly being adopted for both new and existing industrial structures due to its long-lasting protection—often exceeding 25 years—while requiring little to no maintenance. Unlike HDG, which cannot be welded on-site and often poses challenges with repair methods such as liquid coating or cold spray, TSC offers greater …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 106–115 Read article
-
Diglycidyl Ether of Bisphenol A (DGEBA) Based Epoxy Sizing Agent Induces Surface Polarity in Carbon Fibers†
Abstract: Determination of the chemical structure and composition of the sizing agent is a challenge as its concentration is low, varying in the range from ~0.5 wt.% (for polyacrylonitrile, PAN, based carbon fibers) to ~1 wt.% (for pitch-based carbon fibers). Moreover, such a piece of knowledge is vital for designing compatible polymer matrices to prepare CFRPs for diverse applications. As a result, the sizing layer that is coated on the carbon …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 24–34 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Experimental Investigation of Overall Heat Transfer Coefficientin Drop wise Condensation
Abstract: The experiments are performed to study the heat transfer characteristics over a drop wise condensation. The phenomenon of drop wise condensation is in which the condensate forms into drops rather than covering the entire cooling surface with a continuous film. In drop wise condensation, heat transfer coefficient produced is 2 to 10 times greater than those produced by film wise condensation. Hence drop wise condensation is desirable as it is …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 17–21 Read article