Search
107 articles for “Morphological analysis”
-
Wettability and Physiothermal Analysis of Silver-Reinforced Eggshell-Derived Hydroxyapatite Based Biocomposite
Abstract: Hydroxyapatite (HAp), a biocompatible ceramic material, has garnered significant interest in medical applications due to its natural bone type replica. The current study investigates the physical, wettability, and thermal properties of a novel HAp derived from eggshell waste and reinforced with silver nanoparticles at 0.0, 0.1, 0.2 and 0.5 weight % concentration using chemical precipitation method and termed as HAP0.0Ag, HAP0.1Ag, HAP0.2Ag and HAP0.5Ag respectively. As observed, the Fourier transform …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 300–314 Read article
-
Solid acidity of MoO3 synthesized by solution combustion method and acetalization of formaldehyde using it
Abstract: MoO 3 nanoparticles were synthesized via solution combustion approach. Ammonium nitrate was used as oxidant and ammonium molybdate as fuel in combustion reaction. XRD, FTIR and Raman spectroscopy results showed that MoO 3 nanoparticles were successfully synthesized by the solution combustion reaction. The SEM analysis showed that synthesized MoO 3 nanoparticles have rod-like shape with width and thickness of 50-200nm and length of 0.2-1μm, respectively. The XRD pattern and morphology …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 3, 2025 · pp. 01–09 Read article
-
Exploring the Luminescent Behavior of Dysprosium-Doped Halo-sulphate Compounds
Abstract: In essence, this study aims toward understanding the photo-luminescent properties of Dy³⁺ halogenated sulfates, viz., synthesis, characterization, and luminescent behavior of the materials. Dysprosium ions are introduced into the halo-sulfate matrices to investigate their suitability for solid-state lighting applications. The aim of the study is to explain the mechanisms of the photo luminescence of Dy³⁺ and study the influence of the doping concentration on luminescence efficiency and the thermal stability …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 01–06 Read article
-
Facile Synthesis of SnO2/g-C3N4 nanocomposite for the photocatalytic degradation of Methylene Blue dye under visible light irradiation
Abstract: This work reports the nanoscale samples of pure tin dioxide (SnO₂), graphitic carbon nitride (g-C₃N₄), and their composite (SnO₂/g-C₃N₄) were successfully synthesized using the co-precipitation technique. The synthesized materials were extensively analyzed using multiple characterization techniques such as Powder X-ray Diffraction (PXRD), High-Resolution Scanning Electron Microscopy (HR-SEM), Energy-Dispersive X-ray Spectroscopy (EDAX), Fourier Transform Infrared Spectroscopy (FTIR), UV-Visible Spectroscopy, and High-Resolution Transmission Electron Microscopy (HR-TEM). Results from PXRD and EDAX confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1835–1845 Read article
-
Thermal and Morphological Characterization of Rice Starch–Charcoal Composites for Eco-Friendly Engineering Applications
Abstract: This work focuses on the development and evaluation of rice starch–charcoal–based composite materials to overcome the limitations of natural composites with low thermal properties. In order to examine the impact of filler concentration on thermal and structural performance, eight composite specimens were created by altering the ratios of rice starch and charcoal. TGA, DTA, AFM, SEM, and measurements of thermal conductivity and effusivity were used to thoroughly characterize the composites. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1286–1297 Read article
-
3D Printing for Polymer Science Visualization
Abstract: The burgeoning field of 3D printing offers exciting possibilities for various scientific disciplines. This paper explores the potential integration of 3D printing technology within the realm of polymer analysis. While the core focus of memory forensics investigations lies in digital forensics, the concept of 3D printing complex data structures presents intriguing possibilities for the visualization and communication of findings in polymer science. Here, we propose a future research avenue where …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 96–101 Read article
-
Analysis of Ageing and Degradation Behavior of Polyamide-12 for Sustainable Additive Manufacturing
Abstract: Additive Manufacturing (AM), particularly High-Speed Sintering (HSS), has emerged as a transformative technology capable of producing complex thermoplastic parts with high efficiency and minimal material waste. The HSS process involves selective deposition of radiation-absorbing ink followed by infrared heating to consolidate polymer powders-most commonly polyamide-12 (PA12). While PA12 is widely used due to its excellent thermal stability and mechanical properties, the sustainability of HSS strongly depends on the reuse of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 136–154 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article
-
Evaluation of Mechanical Behaviour of Tungsten Carbide and Magnesium Reinforced Aluminium Matrix Composites
Abstract: With industries like automotive and aerospace also being more inclined on the lightweight material and strength that is much substantial, the aluminium-based metal matrix composite has become a major focus of interest. This paper examines the influence of addition of tungsten carbide (WC) and magnesium (Mg) particles on the mechanical characteristics of Al6063 aluminium alloy. The crucible casting technique was made in two composite compositions 2.5 percent and 5 percent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1–8 Read article
-
Valorization of shrimp processing waste by green methodology and its application in Chitosan-PEG composite film
Abstract: Shrimp processing waste is mostly unidentified marine by product, presents considerable environmental pollution which also offers a rich but not fully exploited sources of biopolymers. The current work presents a sustainable method to convert shrimp processing waste into chitosan a biopolymer by green methodology. Isolation of chitin to chitosan from shrimp processing waste was carried through four green methodology steps i. Demineralization using citric acid ii. Deproteinization using papain iii. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Catalyst-Driven Degradation and Failure Analysis of Intergranular Cracking in 316H Studded Pipes under Refinery Heat Recovery Conditions
Abstract: A failure analysis investigation was carried out on a high-temperature studded pipe used in a convection module for heat recovery in an oil and gas refinery application after leakage was detected during pre-commissioning hydrotesting. The investigated pipe was manufactured from AISI 316H austenitic stainless steel, and carbon steel studs had been joined to its outer surface by high-frequency resistance welding. Two leaks were reported in the pipe under investigation, and …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 1, 2026 Read article
-
Next-Generation Conductive Polymer Composites for Flexible and Wearable Electronics
Abstract: The rising demand for flexible and wearable electronics has accelerated research into conductive polymer composites (CPCs) due to their lightweight nature, electrical conductivity, and mechanical flexibility. Despite significant advancements, challenges such as reduced conductivity under mechanical deformation and limited durability persist. This study aims to develop next-generation CPCs with enhanced conductivity, flexibility, and self-healing capabilities. Hybrid nanofillers—graphene, carbon nanotubes (CNTs), and silver nanowires (AgNWs)—were incorporated into bio-based conductive polymers through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 550–566 Read article
-
Multifunctional and Photocatalytic Properties of DyFeO₃/Dy₃Fe₅O₁₂ Biphasic Nanoparticles
Abstract: Rare-earth orthoferrites constitute a class of compounds that exhibit remarkable magnetic, optical, and electronic properties across a wide temperature range. In the present study, a dysprosium-based orthoferrite containing dual phases of DyFeO₃ perovskite and Dy₃Fe₅O₁₂ garnet was successfully synthesized via the co-precipitation technique. X-ray diffraction (XRD) analysis was employed to investigate the structural configuration of the synthesized material. The diffraction pattern confirmed the formation of a biphasic composite comprising orthorhombic …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 41–54 Read article
-
Path Lab-AI: An Autonomous Framework for Error-Free Histopathology Slide Interpretation
Abstract: Path Lab-AI represents a fully autonomous platform for the analysis of histopathology slides with circumscribed structures, designed to obtain highly accurate results using diagnostic methods and avoiding the usual limitations of standard microscopy-based pathology. Leveraging recent deep learning and whole slide image (WSI) analysis innovations, our system takes advantage of automated WSI ingestion along with pre-processing steps to account for staining variability, remove artifacts, and localize tissue from background. Such …
Published in Research & Reviews: A Journal of Bioinformatics · Vol. 13, Issue 1, 2026 · pp. 19–30 Read article
-
Polymer-Coated Composite Granules of Clarithromycin: Design, Characterization, and Functional Evaluation for Taste Masking and Antibacterial Performance
Abstract: Background: Masking the unpleasant taste of clarithromycin is essential to improve patient adherence, especially among pediatric and elderly groups. However, enhancing palatability while maintaining its antibacterial effectiveness remains a significant formulation challenge. This study focused on developing polymer-coated clarithromycin granules (B1–B10) using novel non-sugar-based polymers and assessing their antibacterial activity against Staphylococcus aureus Methods: Clarithromycin granules were produced using a fluidized bed coating technique with non-saccharide polymers, specifically Eudragit E-100 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1042–1050 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Preparation and characterization of High-performance ZnO/PVB Nanocomposite films for UV-shielding and Optoelectronics
Abstract: Zinc oxide nanoparticles can be incorporated into polymer matrices to create materials for various high-performance engineering applications. In this study, zinc oxide nanoparticles were reinforced at different loadings (0.5, 1.0, 0.5, 1.0, 1.5, and 2.0 wt.%) in polyvinyl butyral matrix to synthesize nanocomposite films using the solution casting method. The impact of zinc oxide nanofiller on the morphology and ultraviolet-shielding performance of polyvinyl butyral nanocomposite films was evaluated using various …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 3, 2025 · pp. 35–53 Read article
-
Thermal Conductivity and Energy Storage Performance of Paraffin Wax-Based Composites Reinforced with Amine Functionalized Graphene as a Nanofiller
Abstract: In this study, amine-functionalized graphene (AFG) was employed as a nanofiller/nanomaterial to enhance the thermal and structural properties of a paraffin wax (PW)-based polymeric composite, formulated as a phase change material (PCM). The PW/AFG composite was synthesized with varying nanofiller volume fractions (0.20%, 0.40%, 0.80%, and 1.60%), and its thermal conductivity, stability, and energy storage performance were systematically analyzed. The incorporation of AFG into the polymer matrix significantly improved the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–374 Read article
-
A Systematic Review on Factors Contributing to Infertility
Abstract: Infertility is a multifactorial reproductive health condition affecting approximately 10–15% of couples worldwide and continues to represent a major clinical and social challenge. Despite substantial advances in assisted reproductive technologies, diagnostic methods, and therapeutic interventions, many couples still face difficulties in achieving pregnancy. The impact of infertility extends beyond physical health, often leading to emotional distress, social pressure, and financial burdens, especially in societies where parenthood is highly valued. Consequently, …
Published in International Journal of Tropical Medicines · Vol. 3, Issue 1, 2026 · pp. 31–35 Read article
-
Experimental Analysis of Mechanical Characteristics of Aluminium Matrix Hybrid Composite Using Seashell Powder And Coconut Shell Powder
Abstract: The purpose of this study is to investigate the manufacturing processes and mechanical properties of composites made of marine shell powder, coconut shell powder, and aluminium. In our project, the MMC was made of aluminium with seashell powder and aluminium with coconut shell powder. A stir casting process fabricated the Composite. The composition of aluminium, seashell powder and coconut shell powder varies. According to the criteria established by the American …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 487–494 Read article