Search
366 articles for “Compact”
-
Effect of Alccofine and Tyre buffings on Engineering Properties of Sand
Abstract: In the present paper, the effect of alccofine and tyre buffings addition on the compression and bearing ratio of sand are evaluated through laboratory study. On the basis of compaction test, a reference mix composed of sand + 12 % alccofine + 2 % tire buffing was selected for further study. The unconfined compression and bearing ratio test on the reference mix was then carried out by curing the sample …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 1, 2020 · pp. 9–20 Read article
-
A Study on Soil Stabilization using Cement and Plastic Fibres
Abstract: Soils pose problems to civil engineers in general and to geotechnical engineers in particular. They cause damage to structure founded in them because of their potential to react to changes in moisture regime. Soil stabilization is the process of altering some soil properties by different methods, mechanical or chemical in order to produce an improvement soil material which has all the desired engineering properties. In the present work, an attempt …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 2, 2017 · pp. 1–8 Read article
-
Side Cart Multipurpose Bike Ambulance
Abstract: The Motorcycle ambulances are a type of emergency vehicle which either carries a solo paramedic or first responder to a patient; or is used with a trailer or sidecar for transporting patients. Because of its size and performance, a motorcycle ambulance is able to respond to a medical emergency much faster than a car, van, or fire truck in heavy traffic, which can increase survival rates for patients suffering cardiac …
Published in Journal of Automobile Engineering and Applications · Vol. 7, Issue 2, 2020 · pp. 11–15 Read article
-
A Laboratory Methodological Proposal for “Geotechnical Lime Stabilization of A-4 Soils”
Abstract: This paper establish the beginning of a research process regarding the behavior of soils stabilized with lime. Generally, the geotechnical practice of soils stabilized with lime requires a first step conducted in the laboratory, to attest the features of “natural soils” in order to improve their behavior in term of geotechnical performance and, a second step, carried out onsite with experimental test fields, in order to verify the benefit obtained …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 1, 2021 · pp. 1–11 Read article
-
Effect of lime content of lime-stabilized A-4 Soils in the Unconfined Compressive Resistance
Abstract: This paper is part of a research project carried out between Geotechnical Office of Dr. Barbero & collaborators and Weg Ingeniería, from Italy and Argentina, respectively. Given the multiple applications of soils improvement with lime, in this research we proceed to develop correlations on the bases of results obtained by geotechnical tests, according to international standards, realized in A-4 soils at different contents of lime. The goal is to have …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 1, 2021 · pp. 20–32 Read article
-
Portland Cement for A-4 group Soil Stabilization
Abstract: In the geotechnical practice, the stabilization of soil using cement is a necessary procedure when soilsdo not meet the geotechnical requirements i.e. they show low bearing capacity so it’s necessary toimprove their engineering properties generally adding lime or cement, or moisture of lime andcement. The aim of this research focuses on the description of a geotechnical laboratory tests plan forA-4 Group Soils according to AASTHO Soils Classification, generally consisting of …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 1, 2021 · pp. 41–49 Read article
-
Economic Importance of Laterite Deposit in Oke-Oyi Area, Ilorin, Nigeria
Abstract: Two soil samples A and B were taken from Oke-Oyi, Kwara state, North Central, Nigeria. The water content of the samples are 5.8% and 6.5 for sample A and B respectively. This shows the variability in water table in the area. The specific gravities values are 2.7 and 2.78 for samples A and B, this is an indicator of inorganic soil. Grain size analysis show the laterite to be sandy …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 1, 2023 · pp. 33–37 Read article
-
Development of Graphene Based Super Strong and Thermal Resistant High Nano Composite Materials
Abstract: The main goals of the research is to present the investigation in graphene based super strong and thermal resistant nano composite material and study their structural and mechanical properties after intensive severe plastic deformation. It is observed that the mechanical properties of graphene based super strong Nano composite materials show an intensive severe plastic deformation as accumulative roll bonding process was changed. Severe plastic deformation refined grains in the aluminium …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 9–14 Read article
-
Characterization and Mechanical Behavior of Sintered Al-Mg Powders
Abstract: The resolution of the work is to relate the characterization and mechanical properties for argon atomized Al-1wt%Mg powders through and not through lubricant 1 wt% graphite. Pure nitrogen sintering was accomplished and the effect of sintering atmosphere for the mixed Al-1%Mg powder compacts was examined. One weight percent graphite was premixed with the powder as a lubricant for the first set samples. However, no graphite was used for the second …
Published in Trends in Machine design · Vol. 6, Issue 1, 2019 · pp. 1–7 Read article
-
Measuring Concentration and Deconcentration of Urban Form: A Case Study of Rajkot
Abstract: The concept of compact city development has always been a guiding principle for modern day urban planning and has constantly being practiced in most of the developing and developed nations due to its embedded philosophy of having a socially interactive society without urban sprawl. Efficient use of land, protection of environment, reducing trip length of commuters are some of the key benefits, which has been highlighted by the urban planners. …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 3, 2016 · pp. 23–32 Read article
-
Geotechnical Influence Factors in Empirical Design of Highway Pavement: The A123 Ilorin – Lokoja Highway, Nigeria Case Studies
Abstract: Site investigation and application of geological and geotechnical influence factors on the highway were investigated. Method involved field sampling, geotechnical laboratory and x-ray diffraction analysis and use of SRTM extracted slope and drainage parameters; and their integration in a GIS based multi-criteria decision analysis to derive a subgrade suitability map as a design tool. The suitability criteria classified the highway into four (4) design sections. Section one for very low …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 53–70 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Cold Plasma Enhanced Medical Waste Disposal System
Abstract: Biomedical waste generated in hospitals and laboratories often contains infectious materials that must be treated before disposal to prevent environmental contamination and health risks. Conventional treatment methods such as Incineration are effective but require high temperatures and may produce harmful emissions if not properly controlled. This paper presents the design of a compact biomedical waste disposal system based on Cold Plasma technology. Plasma is generated using a high- voltage circuit …
Published in Journal of Instrumentation Technology & Innovations · Vol. 16, Issue 2, 2026 Read article
-
High-Gain Microstrip Patch Antenna for Satellite and Radar Applications
Abstract: The growing demand for high-speed wireless communication, satellite connectivity, and advanced radar systems has increased the necessity for compact and high-performance antenna designs. This study presents the design and analysis of a high-gain microstrip patch antenna intended for satellite and radar applications operating in the microwave frequency range. The proposed antenna structure is developed using a low-loss dielectric substrate to enhance radiation efficiency, bandwidth, and gain characteristics while maintaining a …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 2, 2026 Read article
-
Role of Clay Liners in Municipal Solid Waste Landfills: A Review
Abstract: Rapid population growth has significantly increased the generation of municipal solid waste (MSW) in urban and suburban regions. Disposal of MSW in landfills without proper liner systems may lead to leachate migration and subsequent contamination of groundwater and surrounding soils. The use of liner systems at the base of landfills is therefore essential to minimize leachate percolation and protect the environment. Geosynthetic clay liners (GCLs) and compacted clay liners (CCLs) …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 2, 2026 · pp. 50–56 Read article
-
A Study on Stabilization of Black Cotton Soil Using Fly Ash and Plastic Fibres
Abstract: AbstractSoil stabilization is most important for the construction which is widely used in connection with road pavement and foundation construction because it improves the engineering properties of soil such as strength. Utilization of industrial waste materials in the improvement of soils is a cost efficient and environment friendly method. Stabilization of the expansive soil is studied by using fly ash and plastic fibres. The present investigation is to evaluate the …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 3, 2017 · pp. 11–18 Read article
-
Design Of Multi-Bit Chipless RFID Tag Using Hybrid Resonator For Retail And Healthcare Applications
Abstract: Resonators play a very important role in chipless radio frequency identification (RFID) systems. To overcome the challenges like cost, compact dimension, and high coding capacity, chipless transponders are highly facilitated for the advancement in chipless RFID technology. This research aims to investigate innovative design options for passive RFID transponders operating in a wide range of frequencies in order to address the aforementioned issues and contribute to RFID technology advancement. To …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 2, 2021 · pp. 35–43 Read article
-
Influence of Constant Micro Strain Levels on the Strength Properties of the Asphalt Concrete mixture
Abstract: Asphalt concrete mixture is designed to resist the deformation and vehicular traffic loading throughout its service life. However, when the asphalt concrete pavement practices over loading within the service life period, it exhibits cracking and rutting. In the present investigation, an attempt has been taken to understand the strength performance of asphalt concrete when practicing variable levels of constant stresses. Asphalt concrete mixture was prepared at optimum asphalt cement requirement …
Published in Trends in Transport Engineering and Applications · Vol. 10, Issue 3, 2023 · pp. 29–35 Read article
-
Design and Analysis of I-Slotted Rectangular Microstrip Patch Antenna for Wireless Application
Abstract: AbstractThis paper presents a novel design of an I-slotted patch antenna with compact nature and the study of various antenna parameters. The antenna is fed by the inset-feeding technique. The proposed patch antenna is designed and simulated on IE3D simulation software (Zeland program manager 9.0). The main aim of the proposed work is to design a large-bandwidth antenna with compact size. The proposed microstrip antenna has a wide bandwidth covering …
Published in Journal of Communication Engineering & Systems · Vol. 3, Issue 3, 2013 · pp. 36–40 Read article
-
Import Substitute for Production of Ultrapure Water by Membrane Integrated Process for Medical and Biotechnological Applications
Abstract: The present invention discloses an inexpensive import substitute compact design of low-cost membrane process for the production of ultrapure water for dialysis and medical applications in different fields like pathological laboratories, biochemical analysis, sterilization and sanitation, dental and optical lens cleansers. The ultrapure water of demineralization (DM) process is related to the cascaded high- flux and high-selective membrane system for hyper permeation which is operated under the pressure of 3-7 …
Published in Research and Reviews : A Journal of Biotechnology Read article