Search
1305 articles for “Material composition”
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 859–873 Read article
-
Development of Environmentally Sustainable Epoxy Composites with Sunflower Seed Husk Fillers and Study on Thermal and Moisture Properties
Abstract: This study examines the development and characterization of epoxy composites reinforced with sunflower seed husk (SSH) fillers fabricated using the compression molding technique. SSH fillers were categorized into two distinct particle size distributions, namely, 4–53 µm and 79–463 µm, and were incorporated into the epoxy matrix at varying volume fractions ranging from 5% to 20%. The water absorption behavior of the composites was assessed according to ASTM standards, and thermogravimetric …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 28–37 Read article
-
Tailoring Toughness of Pineapple Leaf Fiber-Reinforced Epoxy Composites Using Halloysite Nanotubes
Abstract: This comprehensive study investigates the effects of halloysite nanotubes (HNTs) on the impact strength and fracture toughness of pineapple leaf fabric-reinforced epoxy (PALF/Ep) composites with an emphasis on sustainable material development. ASTM D256 and ASTM D5045 standards were followed in the fabrication of the composites. HNT weight percentages were systematically changed from 0 to 3wt% through using solution mixing and manual lay-up techniques, and vacuum bagging was used to obtain …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 261–272 Read article
-
Modelling -Based Evaluation of Hybrid Natural Synthetic Fiber Polymer Composites for Sustainable Energy Applications
Abstract: The growing need of lightweight, high-performance, and green energy system materials has increased the research on hybrid polymer composites. This paper gives a modelling-based evaluation of polymer matrix composites which are reinforced using natural fibers like jute, sisal, bamboo in a combination with synthetic glass fibers to be used in sustainable energy sources. An analytical model has been used to assess the effect of hybrid fiber composition on mechanical, thermal, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 682–688 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Advances in Nanocellulose-Enhanced Polymers and Composites: Structure, Performance, and Applications
Abstract: The most common biopolymer is cellulose, which can be converted into nanocellulose (NC) the sustainable nanomaterial possessing the outstanding characteristic of biodegradability, renewability, low density, high aspect ratio, and excellent mechanical performance. Such distinctive features make NC a promising filler in polymer and composite systems. Recent developments in the preparation of nanocellulose using various natural and artificial sources have facilitated scalable production processes that have less energy requirements and are …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1610–1623 Read article
-
Magnetic Metal–Polymer Composites with Ferromagnetic Particle Networks for EMI Shielding in Flexible Electronics
Abstract: The rapid expansion of flexible and wearable electronic systems has intensified the demand for lightweight, mechanically compliant materials capable of effective electromagnetic interference (EMI) shielding. In this study, magnetic metal–polymer composites with magnetically aligned ferromagnetic particle networks were developed and systematically investigated for EMI shielding in flexible electronics. Thermoplastic polyurethane (TPU) was employed as an elastomeric polymer matrix due to its excellent flexibility, dielectric characteristics, and compatibility with particulate fillers. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 25–39 Read article
-
Novel Porous Refractory Synthesized from Diatomaceous Earth and Rice Husk Ash
Abstract: Refractory materials are products used in thermal equipment to protect the fire and prevent heat loss to the outside environment. Thermal equipment such as driers, ceramic kilns, glass or metal furnaces and others always consume high heat in the combustion of the fuel. If the thermal equipments have high heat loss which cause wastes of fuel and increases production costs. Therefore, researchers are always looking for a solution to minimize …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 128–137 Read article
-
Evaluation of Epoxy Granite as an Alternate Material for Lathe Bed
Abstract: Machine Tool is a machine that gives the desired shape to the work with required accuracy of removing metal from the work in the form of chip. Beds, columns, bases, head stock are known as ‘structure’ in a machine tool. The Lathe Bed should be sufficiently rigid to prevent deflection under tremendous cutting pressure transmitted through the tool-post and carriage to the Lathe Bed. It must be massive with sufficient …
Published in Trends in Mechanical Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 59–68 Read article
-
Synthesis, Characterization and Deformation Studies of Blast Furnace Slag Particles Reinforced Aa2024 Composite
Abstract: The main objective is to explore the use of blast furnace slag as a reinforcing material. This work provides results of aluminum metal matrix composites reinforced with granulated slag (GS). The Composite is prepared by taking AA 2024 and GS with stir casting process. Optical microscope and scanning electron microscopy were employed to track the reactions between the aluminum matrix and the granulated slag during the sintering treatment. The hardness …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 31–43 Read article
-
Experimental Investigation of Mechaniccal and Thermal properties of Pmyra bract fiber composite
Abstract: Ecological concerns have resulted in renewed interest in natural materials in terms of their industrial applications and fundamental research. Recyclability and environmental safety are becoming increasingly important to the introduction of natural materials and products. Petroleum based products such as resins in thermo set plastics are toxic and non- biodegradable. The resins and fibres used in green composites are biodegradable when they are dumped, decomposed by the action of microorganisms. …
Published in Trends in Mechanical Engineering & Technology · Vol. 4, Issue 3, 2014 Read article
-
Investigations on Mechanical Properties of Al 8011 Reinforced with Micro B4C/Red Mud by Stir Casting Method
Abstract: Aluminium metal matrix composites are emerging as the most versatile material for unique automotive, aviation, aerospace, defense, marine applications and other structural applications due to their excellent mixture of properties. In the present investigation, a hybrid composite of Al8011 aluminium alloy reinforced with B4C and red mud was fabricated by stir casting method. Red mud is one of the major waste material extracted from the bauxite ore of alumina during …
Published in Journal of Electronic Design Technology · Vol. 7, Issue 1, 2016 · pp. 32–38 Read article
-
Tribological Performance and Wear Coefficient Prediction of AA2024–TiC Composites via Python-Based Machine Learning
Abstract: Determining wear coefficient accurately serves as a critical factor to maximize engineering materials' tribological characteristics. The experiment examines the wear characteristics of TiC-reinforced AA2024 aluminum alloy subjected to different tribological operating conditions. A pin-on-disc tribometer performed wear tests under different conditions of load and TiC weight fraction and sliding speed and duration. ANOVA statistical results show that load intensity and TiC reinforcement density stand out as principal variables that affect …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1099–1112 Read article
-
Test Investigation on Mechanical Properties of Palmyra Bract Fiber Composite
Abstract: AbstractBiological concerns have brought about replenished enthusiasm for regular materials regarding their mechanical applications and principal examination. Recyclability and ecological security are getting to be progressively vital to the presentation of characteristic materials and items. Petroleum based items, for example, gums in thermo set plastics are poisonous and non- biodegradable. The saps and filaments utilized as a part of green composites are biodegradable when they are dumped, disintegrated by the …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 33–36 Read article
-
Eco-Friendly and Sustainable Furniture in Interiors
Abstract: In the realm of interior design, the imperative for sustainability has become increasingly pronounced. "Sustainable Materials and Design: Shaping the Future of Furniture for a Greener Planet" explores the pivotal role of interior designers in advancing sustainable practices and innovative design solutions within the furniture industry. This paper delves into the environmental challenges inherent in traditional furniture manufacturing methods and materials, underscoring the need for transformative change. Through an examination …
Published in International Journal of Sustainability · Vol. 1, Issue 1, 2024 · pp. 1–9 Read article
-
Fabrication and Experimental Investigation on Mechanical Properties of Quartz Particulate Reinforced Aluminium Composite
Abstract: Composites are processed by adding a reinforcement phase in a base metal. The base material is known as a matrix and the constituent that is added is called reinforcement. The matrix acts as a support while the reinforcements attach themselves in their respective positions which results in the synthesis of a material which has different mechanical and thermal properties compared to their raw materials. Since aluminium is used as a …
Published in Journal of Production Research & Management · Vol. 14, Issue 3, 2024 · pp. 19–25 Read article
-
Neuromorphic Self-Learning Polymer–MXene Photovoltaic Composites with Embedded Memristive Energy Routing for Adaptive Solar Energy Harvesting
Abstract: This dynamic and fast-growing intelligent renewable energy system requires photovoltaic materials that can autonomously adapt to fast-changing environmental conditions. In this study, a novel system is proposed for adaptive harvesting of solar energy based on Neuromorphic Self-Learning Polymer–MXene Photovoltaic Composites (NSPMPCs) with embedded memristive energy routing networks. To boost the charge generation and charge transport in the polymer–MXene heterostructure, the flexibility and processability of conductive polymers are integrated with the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 453–488 Read article
-
Commercialization of Smart Polymers in Advanced Composite Structures for Industrial Applications
Abstract: The commercialization of smart polymers in advanced composite structures represents a significant rise in material science, particularly for industrial applications. These smart polymers show unique properties such as self-healing, shape memory, & responsiveness to environmental disturbances, making them ideal for a wide range of applications. In this paper, the researcher explores the advancements in developing and applying smart polymers within composite structures, focusing on their potential. Revolutionize industries like atmosphere, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 70–81 Read article
-
Nanostructured Catalysts for Sustainable CO2 Reduction: Advancing Green Chemistry and Polymer Composites
Abstract: This study provides a comprehensive analysis of advanced nanostructured catalysts designed to enhance the efficiency of artificial photosynthesis for sustainable fuel production. We systematically evaluated a range of nanomaterials—including metal oxides, plasmonic nanoparticles, and carbon-based composites—to determine their effectiveness in converting solar energy into storable chemical fuels. The catalysts were synthesized via sol-gel, hydrothermal, and green methods, and their properties were thoroughly characterized using XRD, SEM, TEM, UV-Vis spectroscopy, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 175–181 Read article
-
Experimentation and Investigation of E - Glass Fibre/ Polyester Composites Laminates
Abstract: This paper centres on the autoclave moulding technique, offering a comprehensive analysis of the specimen fabrication process. The advanced composite manufacturing process involves the use of high temperatures and pressures during the curing step. This results in composite specimens that have a higher density and are devoid of any voids. Polyester, E-glass fibre, and SiC powder are the material components that make up the composite in this study. It is …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 477–487 Read article