Search
734 articles for “parameter study”
-
Influence of ZycoTherm Dosage on Polymer Modified Bitumen and Marshall Performance of Hydrated Lime Incorporated Warm Mix Bituminous Concrete
Abstract: This study examines the effect of ZycoTherm on PMB 76-10 binder characteristics and the performance of PMB-based Bituminous Concrete (BC) Grade-II prepared at reduced mixing temperatures, with and without hydrated lime. PMB 76-10 was modified with ZycoTherm at dosages of 0.05%, 0.10%, 0.15%, and 0.20% by weight of binder and evaluated using conventional and residue-based tests. Increasing ZycoTherm dosage decreased penetration, while softening point, flash point, and elastic recovery increased, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 256–267 Read article
-
Review on Severe Plastic Deformation Techniques for Bulk Materials: Deformation Behavior and Properties
Abstract: This paper presents a detailed review of the efficient application of Severe Plastic Deformation for the fabrication of ultra-fine-grained and nanostructured crystalline bulk materials. Severe Plastic Deformation allows substantial grain refinement while largely preserving the original dimensions of the workpiece, making it especially suitable for ductile materials capable of sustaining very high strains under elevated hydrostatic pressure prior to failure. The study investigates the grain refinement mechanisms involved in Severe …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 40–72 Read article
-
Green AI-Enabled Opto-Electronic Communication Systems for Carbon-Neutral Digital Networks
Abstract: The rapid expansion of digital communication infrastructure, driven by cloud computing, Internet of Things (IoT), 6G networks, and artificial intelligence applications, has significantly increased the energy consumption and carbon footprint of modern communication systems. Conventional optical communication networks often rely on static resource allocation and energy-intensive signal processing mechanisms, resulting in inefficient utilization of network resources and elevated operational costs. This study proposes a Green Artificial Intelligence (Green AI)-Enabled Opto-Electronic …
Published in Trends in Opto-electro & Optical Communication · Vol. 16, Issue 2, 2026 Read article
-
Studying the Effectiveness of Solar Thermal Collectors Using Nanofluid
Abstract: Energy plays a crucial role in the technological growth that humanity is now experiencing. However, new avenues for energy generation and consumption have also been made possible by this advancement in science and technology. Another major factor driving up energy needs is an increase in population density. Carbon footprints are being left on the environment by fossil fuels, which are running out more quickly. Dependence on renewable energy sources, which …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 35–41 Read article
-
Effect of Carbonyl Iron Particle Concentration on The Printability and Stiffness of Magnetorheological Elastomer Filaments
Abstract: Magnetorheological elastomer (MRE) are increasingly valued for their field-responsive mechanical properties, making them ideal for adaptive components in automotive, aerospace, and vibration control systems. However, conventional mould-based fabrication methods limit design flexibility, produce excess material waste, and are unsuitable for complex or customized geometries caused challenges that have hindered broader industrial adoption. Although 3D printing offers a compelling alternative, research on printable MRE filaments remains limited, particularly regarding how carbonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 310–317 Read article
-
Twisting, Super Twisting and Adaptive Algorithm Sliding Mode Controller for Second Order Time Delay Systems
Abstract: The sliding mode control approach is widely considered as one of the most effective methods for designing a reliable controller for a complicated higher-order dynamic plant operating under uncertainty. The primary advantages of sliding mode is its low sensitivity to changes in plant parameters and the ability to entirely eliminate disruptions. Sliding mode control has been widely applied as a robust control design methodology that is completely insensitive to uncertainties, …
Published in Current Trends in Signal Processing Read article
-
Deep Reinforcement Learning-Based Intelligent Energy Management Strategy for Battery–Supercapacitor Hybrid Energy Storage Systems in Electric Vehicles
Abstract: As the number of EVs increases, smart solutions for energy management are needed that will optimize energy use, prolong battery life and boost vehicle performance. The application of conventional rule based and optimization-based Energy Management Strategies (EMS) for Battery–Supercapacitor Hybrid Energy Storage Systems (HESS) often leads to sub-optimal power management, supercapacitor mismatch and battery degradation when subjected to varying driving conditions. This study aims to design an intelligent energy management …
Published in International Journal of Advanced Control and System Engineering · Vol. 4, Issue 2, 2026 Read article
-
Analysis of Machine Learning in Metal Processing: A Novel Prospect
Abstract: Metal is processed by a wide range of procedures, from forming and casting to machining and riveting. Metal processing is a crucial part of modern manufacturing. The application of machine learning (ML) is driving a significant change in the sector, which has historically depended on empirical knowledge and trial-and-error techniques. Increased production, improved product quality, and resource optimization are expected outcomes of this action. This study aims to explore the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 40–51 Read article
-
Preparing Chitosan Hybrid Nanocomposites by Novel Additives for Wound Healing
Abstract: Biomaterials made from chitosan have been discovered to be particularly unique marine polysaccharides (or polycarbohydrates) with a wide range of physico-chemical and biological characteristics suitable for biomedicine field. Due to net positive charge of chitosan, it is essentially capable of chemically binding with negatively charged surfaces A biodegradable blend of chitosan nanoparticles (CHT), poly vinyl alcohol (PVA) and polyethylene glycol (PEG) hybridized with metal oxides nanopowders were prepared and used …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 9–23 Read article
-
IoT Sensors to Monitor Pipeline Pressure and Flow Rate Combined with ML-Algorithms to Detect Leakages
Abstract: In the field of fluid mechanics, pipelines are the lifeblood of industries, transporting everything from natural gas and oil to water and chemicals. Maintaining their integrity is paramount for safety, economic efficiency, and environmental protection. Traditional leak detection methods explained in fluid mechanics can be slow, expensive, and sometimes fail to identify small leaks early enough to prevent significant damage. However, the convergence of Internet of Things (IoT) and Machine …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 2, 2025 · pp. 40–48 Read article
-
Gear-Related Stress Analysis and Comparison Between the Fem and Agma Standards
Abstract: In many different devices, gears enable the efficient transfer of motion and torque. They are an essential component of modern mechanical power transmission systems. It has been demonstrated that bending and surface contact stresses at the gear tooth are the primary causes of gear failure, despite their widespread use. Too much stress can lead to tooth wear, pitting, or breakage, which can ultimately reduce the operating life and reliability of …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 13–18 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Advanced 4-Element UWB-MIMO Antenna Design: Achieving High Isolation and Multi-Band Rejection for Advanced Wireless Applications
Abstract: In this study, we present the design, fabrication, and analysis of a step-by-step Ultra-Wideband (UWB) Multi-Input Multi-Output (MIMO) antenna operating from 3 to 14 GHz. The antenna consists of four elements, each characterized by high isolation and equipped with four band-rejection features. These elements are implemented on a Rogers substrate with εr=3. Each antenna element is a modified rectangular patch, incorporating partial ground etching to achieve wider bandwidth. Two sets …
Published in Journal of Communication Engineering & Systems · Vol. 15, Issue 1, 2025 · pp. 40–62 Read article
-
Nanostructured Catalysts for Sustainable CO2 Reduction: Advancing Green Chemistry and Polymer Composites
Abstract: This study provides a comprehensive analysis of advanced nanostructured catalysts designed to enhance the efficiency of artificial photosynthesis for sustainable fuel production. We systematically evaluated a range of nanomaterials—including metal oxides, plasmonic nanoparticles, and carbon-based composites—to determine their effectiveness in converting solar energy into storable chemical fuels. The catalysts were synthesized via sol-gel, hydrothermal, and green methods, and their properties were thoroughly characterized using XRD, SEM, TEM, UV-Vis spectroscopy, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 175–181 Read article
-
IoT-Connected Transparent Conductive Polymer–Silver Nano-wire Electrodes for Real-Time Performance Monitoring of Flexible Solar Panels
Abstract: Flexible photovoltaic technologies have emerged as promising energy harvesting solutions for wearable electronics, portable power systems, and Internet of Things (IoT)-enabled smart devices. However, the limited mechanical durability of conventional transparent conductive electrodes and the lack of integrated real-time monitoring restrict their long-term reliability. This study presents an IoT-connected transparent conductive polymer–silver nanowire (PEDOT:PSS–AgNW) hybrid electrode for flexible solar panels, combining high optoelectronic performance with continuous wireless performance monitoring. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Thermal Performance Analysis and Optimization of Pin-Fin Heat Sink Using CFD, Taguchi Method, and Machine Learning
Abstract: Efficient thermal management is essential for improving the performance and reliability of modern engineering systems and electronic devices. This study presents the design, simulation, and optimization of a pin-fin heat sink using SolidWorks for three-dimensional modeling and ANSYS for thermal and computational fluid dynamics (CFD) analysis. Four different pin-fin geometries, namely square, pentagon, octagon, and circular fins, are considered to evaluate their thermal performance under varying operating conditions. Aluminum is …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Production of n-Butanol from Biomass by Two Step Fermentation Process Using Staphylococcus Sciuri
Abstract: This study explores the sustainable production of n-butanol from wheat husk through a two-step bioconversion process. Wheat husk, an abundant agricultural residue, was first fermented into butyric acid using Bacillus subtilis. The resultant butyric acid was then converted into n-butanol using Staphylococcus sciuri. The process leverages biological fermentation to create value-added chemicals from lignocellulosic biomass, offering an eco-friendly alternative to petrochemical methods. Two steps fermentation process were carried to increase …
Published in International Journal of Biochemistry and Biomolecule Research · Vol. 2, Issue 2, 2024 · pp. 18–31 Read article
-
Numerical Study of Natural Convection Heat Transfer in Porous Particles Through Composite Filters
Abstract: The study of heat transmission through porous materials within the confines of reactor configurations stands as a pivotal realm of inquiry in the realms of engineering and the applied sciences, possessing wide-ranging applications spanning from soil mechanics to the refinement of heat exchange systems. Porous substances, distinguished by their interconnected voids or interstices, present an array of reactor forms that profoundly shape the flow of fluids and the conveyance of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 268–279 Read article
-
A Comprehensive Exploration of Method Validation and Development in Pharmaceutical Analysis: Focus on Vortioxetine Analysis
Abstract: The pharmaceutical industry relies on rigorous method validation to ensure the accuracy, precision, and reliability of analytical techniques employed in drug testing and quality control. This comprehensive exploration delves into the validation parameters and guidelines essential for method validation, emphasizing accuracy, precision, linearity, detection and quantitation limits, specificity, range, robustness, and ruggedness. Validation plays a pivotal role in guaranteeing high-quality products, adhering to good manufacturing practices (GMP), and optimizing manufacturing …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 11, Issue 1, 2024 · pp. 46–52 Read article
-
Structure–Property Modeling of Cement-Based Multi-Component Composites Using Ensemble Machine Learning and Explainable Feature Attribution
Abstract: Accurate prediction of compressive strength is central to structure–property optimization, quality control, and sustainability-driven design in cement-based composite materials. Cementitious systems represent heterogeneous multi-phase composites composed of reactive binder matrices and dispersed aggregate phases, whose macroscopic mechanical performance emerges from complex nonlinear interactions among constituents and curing-dependent microstructural evolution. This study develops a data-driven structure–property modeling framework to quantify the nonlinear dependence of compressive strength on multi-component composite composition and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 112–131 Read article