Search
977 articles for “Properties of composite”
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article
-
Mechanical Properties of Acrylonitrile-Butadiene Rubber Reinforced by Cement Waste
Abstract: The basic idea of this paper is to prepare and study the composite rubber material for the manufacturing of an important part in the grain transportation systems in silos of general company for grain trade namely rablat, where it was the experience of this rablat manufactured in the new silo of Hilla/Babylon province for a period of eight months in winches and vector chain where fully proven. In this paper, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 2, 2015 · pp. 13–16 Read article
-
Hybrid Material Systems for Flexible Electronics Electro-Mechanical Performance and Future Prospects
Abstract: Flexible electronics are transforming the landscape of modern electronic systems, enabling devices that are lightweight, stretchable, and adaptable to complex surfaces. These technologies are particularly impactful in applications such as wearable health monitors, soft robotics, energy harvesting systems, and implantable biomedical devices. At the heart of this evolution are hybrid material systems—engineered composites that combine organic polymers and inorganic nanomaterials to achieve synergistic electro-mechanical properties. These materials address the limitations …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 7–12 Read article
-
Surface Modified Abaca Fibers: Physico-Mechanical, Morphological and Degradation Properties Evaluation
Abstract: Lignocellulosic fibers are used as cost-cutting fillers in plastics factories. Amid several factors, the ultimate performance of composite ingredients depends on the bond between the matrix resin and the filler, and hence on the quality of the interface. To acquire optimal performance of the end product, adequate interaction between the matrix and the lignocellulosic ingredient is preferred. This is often acquired through surface modification of the matrix or filler. Abaca …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 2, 2022 · pp. 34–46 Read article
-
An Experimental Investigation on Hybrid Polymeric Composite Materials Reinforced with Sisal & Acacia Fiber
Abstract: AbstractThe demand for wood materials in the construction of building field is on the rise. This leads to the depletion of natural resources and encourages deforestation. The polymeric composite materials reinforced with natural fiber are being used as a wood substitute and is also used for fabricating interior parts of the automobiles. Acacia fiber is also added to the polyester resin, since it is good in compressive and tensile strength. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 19–24 Read article
-
Novel Catalytic Strategies for Reducing Residual Stresses and Improving Surface Quality in Machined Ceramic Materials
Abstract: To prepare for material cutting and utilize utility-specific edges, it’s crucial to understand the inherent brittleness of ceramics. This brittleness limits the forming methods available and hinders achieving dimensional accuracy and precision through conventional machining techniques. The fabrication of composite materials is becoming increasingly significant, particularly in technical fields like the automotive industry, where they are used to manufacture engine connecting rods, propeller shafts, brake discs, and more. The machining …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 2, 2024 · pp. 01–07 Read article
-
Experimental Exploration of Crack and Damage Dynamics of Hybrid FRP Nano Composites
Abstract: Fiber-reinforced polymer (FRP) composites have become essential materials in modern engineering structures because of their excellent strength-to-weight ratio, corrosion resistance, and adaptability in design. Among different fracture modes, Mode I interlaminar fracture where cracks propagate under tensile opening stresses is one of the most critical forms of damage in layered composites. Since delamination occurs within the matrix-rich regions between plies, improving the matrix properties plays a key role in enhancing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 220–232 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Fabrication and Mechanical Characterization of Hybrid Metal Matrix Composite Castings
Abstract: This work investigates and addresses the casting of a novel hybrid composite material with tungsten carbide and aluminum-silicate particles mixed at varying weight fraction rates. Production of hybrid composite has some advantages if it is processed by near net shape techniques. The simplest method for dealing with this hybrid composite is the turbulence produced by the vortex agitating technique. The vortex mixing method is used in this study to create …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 3, 2024 · pp. 32–38 Read article
-
Commercialization of Smart Polymers in Advanced Composite Structures for Industrial Applications
Abstract: The commercialization of smart polymers in advanced composite structures represents a significant rise in material science, particularly for industrial applications. These smart polymers show unique properties such as self-healing, shape memory, & responsiveness to environmental disturbances, making them ideal for a wide range of applications. In this paper, the researcher explores the advancements in developing and applying smart polymers within composite structures, focusing on their potential. Revolutionize industries like atmosphere, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 70–81 Read article
-
Water Absorption and Mechanical Behaviour of Bagasse Fibre and Particle-Reinforced Hybrid Composite Materials
Abstract: This study investigates the mechanical behaviour and water absorption characteristics of bagasse fibre and groundnut shell particle (GSP)-reinforced hybrid composites using a phenol-formaldehyde (PF) resin matrix. Varying weight fractions of GSP (5%, 10%, 15%, and 20%) were incorporated into the composites, with bagasse fibre content kept constant at 30% by weight. Tensile, flexural, and impact strengths were measured, and the water absorption behaviour was evaluated following ASTM standards.The results indicated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 115–124 Read article
-
Mechanical Properties of Tri Sustainable NBR/Cement Waste/Rice Husks Silica Blend
Abstract: AbstractThe accumulation of agricultural and industrial manufacturing waste is an important environmental problem of the most countries in which the means of recycling these waste are not available. Therefore, it is important to find sustainable green engineering applications for the integration of these wastes in the industry and be an environmental, economic and industrial competitor and alternative to materials existing now. Cement waste and rice husks silica were added as …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 29–31 Read article
-
Studies on Mechanical, Electrical and Thermal Properties of Compatibilized PLA/ABS Blends Reinforced with Wood Flour
Abstract: AbstractPoly lactic acid (PLA) bio-polymer (60%) was blended with acrylonitrile butadiene styrene (ABS) (40%) and filled with wood flour (0, 10, 20%) using a twin screw compounding extruder and a suitable compatibilizer i.e., glycerol, is also incorporated into that mixture at a percentage of 4% respectively. Test specimens were prepared by using an injection molding machine for mechanical, electrical and thermal properties as per ASTM standards and the properties were …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 20–26 Read article
-
Substantial Enrichment of Mechanical, Thermal and Electrical Properties of Thermoplastic Polyester Elastomer by Melt Blending with Nano-ZnO
Abstract: Polymers are more reinforced with nano-metal oxides, a completely flexible composite of engineering that simplifies the way of exhibiting good mechanical and chemical features. Polymer mixtures represent a very vital field in the handling of innovative ingredients, which have better features than net polymers. Polymer mixtures can deliver ingredients with prolonged useful features beyond the range that can be achieved from a single polymer equivalent. A methodical study was performed …
Published in Emerging Trends in Chemical Engineering · Vol. 9, Issue 1, 2022 · pp. 12–22 Read article
-
Polymer Chemistry and Composite Materials in Biomedical Applications
Abstract: The integration of polymer chemistry and composite materials has revolutionized biomedical applications. Recent advancements in polymer synthesis, functionalization, and nanotechnology have further expanded their applications, leading to significant improvements in biocompatibility, biodegradability, and mechanical performance. These polymeric carriers protect bioactive compounds from enzymatic degradation, enable controlled drug release, and improve therapeutic efficacy. The integration of polymer chemistry with nanotechnology has enabled the development of highly efficient, targeted therapeutic systems that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 413–419 Read article
-
Sustainable Ground Improvement Using Industrial Waste: Steel Slag as Granular Columns
Abstract: The increasing demand for infrastructure development on weak and compressible soils has necessitated the adoption of effective ground improvement techniques. At the same time, the rapid growth of the steel industry has resulted in the generation of huge quantities of steel slag, posing significant environmental and waste management issues. This paper focuses on the sustainable utilization of steel slag as a substitute material for granular columns in ground improvement applications. …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 2, 2026 · pp. 14–20 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 859–873 Read article
-
Polymer Matrix-Based High-Performance Thermoplastic Composites for Automotive Applications: Design, Characterization, and Interface Behavior
Abstract: The study emphasizes the role of high-performance thermoplastic polymer matrices such as PEEK, PPS, and PA6, selected for their superior thermal stability, mechanical strength, and recyclability in automotive environments. The expanded usage of electric vehicles (EVs) and self-driving transportation creates a demand for advanced materials which are weight-conscious yet high in strength relative to their weight, impact-resistant yet still being environmentally friendly. This study aims to create and define fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 216–237 Read article
-
Mechanical and Morphological Characterization of Halloysite Nanotube (HNT) Reinforced Urethane Dimethacrylate (UDMA) Dental Composites
Abstract: Dental resin composites are widely used in restorative dentistry because of their excellent aesthetics, conservative cavity preparation, and satisfactory mechanical properties. However, their long-term clinical performance is limited by polymerization shrinkage, wear, microcrack formation, water absorption, and degradation in the oral environment. This study investigates the mechanical and morphological characteristics of Halloysite Nanotube (HNT)-reinforced Urethane Dimethacrylate (UDMA) dental composites to enhance the structural performance and durability of restorative materials. UDMA-based …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article