Search
650 articles for “materials characterization”
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article
-
Experimental and Polynomial Regression Modelling of Tensile Characteristics of Hybrid Jute/Hemp Fiber Composites
Abstract: The present study aims to develop hybrid jute-hemp fiber/epoxy composites by the hand lay-up process with 60% of fiber reinforcement and 40 % of matrix ratio. To measure the change of tensile properties, prepared hybrid composites were tested for normal tensile strength and edge notch tensile (ENT) test as per the ASTM standards. Findings show that, developed composites with reported tensile strength followed by comparing it with fracture toughness. Experimentally, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 47–58 Read article
-
Experimental Investigation on Heat Transfer Characteristics of Thermal Barrier Coating on Aero Engine Components
Abstract: The gas turbine blades play a crucial role in harnessing energy from the high-temperature and highpressure gas generated by the combustor. To withstand this challenging environment, turbine blades often employ super-alloys and incorporate new manufacturing technologies such as Direct Solidification (DS) and Single Crystal (SC). Additionally, the development of advanced ceramic Thermal Barrier Coating (TBC) is imperative to achieve higher operating temperatures (>1200°C). Therefore, the primary focus of this study …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 50–58 Read article
-
Polymeric Actions to Make Recycled Aggregate of Concrete Improved
Abstract: Recycling construction materials of concrete, steel, and steel scraps is an essential technique to promote sustainable material flow. The restricted reuse of recycled concrete aggregate (RCA) can be justified, even in part, by the impact on strength and durability of new RCA-based concrete, instead of natural aggregates. Various research has been conducted on improving RCA effectiveness, in particular resistance and water absorption to disintegration. Application of polymer-dependent therapy was used …
Published in Journal of Polymer & Composites Read article
-
Revealing the Effect of Swift Carbon Ion Beam on Radiation Sensitivity of Radio-frequency Magnetron Sputtered Grown Alumina Thin Films
Abstract: Regarding targeted treatment, hadron therapy is beneficial than conventional radiotherapy based on X rays/gamma rays due to characteristic energy loss profile of energetic charged particle during ion matter interaction. In this regard, dose monitoring and its precise measurement with spatial accuracy are very crucial. Thermoluminescence (TL) based thin film radiation dosimeter has the potential to serve this purpose. In hadron therapy, use of swift carbon ion beam is found to …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 23–29 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
A Study on Tensile Characterization of Polypropylene Reinforced with Recycled Epoxy Particles
Abstract: Polypropylene is a thermo plastic, tensile properties of polypropylene are crucial in the real world applications as they determine structural integrity and durability. Epoxy is a thermosetting plastic finds applications in various fields like aerospace, automobile, food packing etc. A major concern is the disposal of epoxy composites after their service life, since most of the waste is sent to landfills, causing land pollution and soil infertility. In this experimental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 221–237 Read article
-
An Analysis of Machining Parameters for Metal Matrix Composite
Abstract: The electro-discharge machining analysis of hybrid Composite is presented in this work. Variables are chosen for the input process parameters. The material removal rate is acknowledged as an output parameter, together with the current, graphite and silicon carbide percentage and pulse on time. We used the Taguchi Method to conduct our experiments. To create the theoretical model and look into how process parameters affect the rate at which material is …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 76–85 Read article
-
Online Learning’s Effect on Education
Abstract: This review paper, titled “Online Learning’s Effect on Education,” delves into the multifaceted impact of online learning on the educational landscape. It investigates how online learning influences students, educators, and institutions, exploring its effects on learning outcomes, pedagogical strategies, and the evolving nature of education itself. This study offers valuable insights into the potential benefits and challenges associated with online learning, shedding light on its continuously developing role in the …
Published in International Journal of Mobile Computing Technology · Vol. 2, Issue 2, 2024 · pp. 1–7 Read article
-
Tb3+ activated Boro Phosphate Glass: Synthesis and Photoluminescence (PL) Characteristics
Abstract: The (40B2O3+ 3Al2O3+(10-x) P2O5 + xTb + 7ZnO+5LiCO3+ 10H6NO4P+25SrCO3) boro phosphate glass was successfully synthesized via melt quenching method. The structural confirmation is supported with X-ray diffraction (XRD) data and surface morphology was defined by scanning electron microscope (SEM). The (40B2O3+ 3Al2O3+(10-x) P2O5 + xTb+ 7ZnO+5LiCO3+ 10H6NO4P+25SrCO3) boro phosphate glass has been investigated for its Photoluminescence (PL) under UV excitation. At 544 nm, the excitation was observed, and at 222 …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 43–47 Read article
-
Effects of Sub-Zero Temperatures on the Viscoelastic Properties of Magnetorheological Elastomer
Abstract: Magnetorheological elastomers (MREs) are smart materials capable of tuneable stiffness and damping under applied magnetic fields. This renders the material as a promising candidate for adaptive vibration control and semi-active engineering applications. While their behaviour at elevated temperatures has been widely explored, limited attention has been given to their performance under sub-zero conditions, which are critical for cold-environment applications. As this has become an important concern, the study investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Experimental Investigation on Mechanical Characterization of Electrodeposited Shot Peened Copper Coated and Un-Coated Mild Steel
Abstract: The fatigue strength of fabricated copper coating on mild steel specimens under repeated loading and the overall number of cycles to failure has been investigated. The specimens of copper coating on mild steel substrate are fabricated by using an electro deposition shot peening method. The hardness behaviour of fabricated specimens studied and the experimental work has been carried out by using Vickers Micro Hardness under the load of 20N force. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 279–288 Read article
-
Design and Performance Analysis of Microwave Filters and Resonators for High-Frequency Systems
Abstract: Microwave filters and resonators are fundamental components in high-frequency systems, playing a crucial role in signal selection, interference suppression, and frequency stabilization. This review presents a detailed analysis of design methodologies and performance characteristics of microwave filters and resonators used in modern communication and radar applications. Various filter topologies, including low-pass, high- pass, band-pass, and band-stop configurations, are examined with respect to their frequency response, insertion loss, selectivity, and bandwidth. …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 1, 2026 · pp. 8–16 Read article
-
Marine Algal Fiber Reinforced Bio-Composites with Embedded Humidity Sensors for Coastal Smart Infrastructure
Abstract: The development of sustainable structural materials with integrated sensing capabilities has emerged as an effective strategy for improving the durability and resilience of coastal infrastructure exposed to aggressive marine environments. In this study, a multifunctional marine algal fiber reinforced bio-composite incorporating an embedded flexible humidity sensor was developed for real-time structural health monitoring applications. Marine macroalgae (Ulva lactuca) fibers were chemically functionalized using 3-aminopropyltriethoxysilane (APTES) to enhance fiber–matrix interfacial adhesion …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Treatment of Textile Industrial Wastewater using Hydrophilized Polyamide Nanofiltration Membrane for Water Recovery and Reuse
Abstract: The textile industry is very water intensive. Water is used for cleaning the raw material and for many flushing steps during the entire production process. During the process a large quantity of wastewater is produced which consists of dyes, heavy metals, pigments, and surfactants in high concentration levels all around the world. Dyes and other chemical laden wastewater released by textile industries is a major concern for the treatment which …
Published in Journal of Water Pollution & Purification Research Read article
-
Modelling -Based Evaluation of Hybrid Natural Synthetic Fiber Polymer Composites for Sustainable Energy Applications
Abstract: The growing need of lightweight, high-performance, and green energy system materials has increased the research on hybrid polymer composites. This paper gives a modelling-based evaluation of polymer matrix composites which are reinforced using natural fibers like jute, sisal, bamboo in a combination with synthetic glass fibers to be used in sustainable energy sources. An analytical model has been used to assess the effect of hybrid fiber composition on mechanical, thermal, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 682–688 Read article
-
Enhancing Bituminous Mixes with Recycled Polyethylene: Performance Analysis Using Marshall Stability Test
Abstract: This study investigates the impact of incorporating recycled low-density polyethylene (LDPE) and high-density polyethylene (HDPE) in bituminous mixes for potential use in flexible pavement construction. Utilizing a Marshall Stability Test, various proportions of LDPE and HDPE were analyzed to determine optimal stability and flow characteristics. The test maintained a fixed Zycotherm content at 1.5% and varied LDPE content from 2% to 5% by weight, while HDPE content was also tested …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 1–5 Read article
-
Comparative Evaluation of the Pozzolanic Activity of Artificial Pozzolans: Steel Slag, Fly Ash, and GGBFS
Abstract: Evaluating the pozzolanic activity of specific industrial waste is crucial given the growing demand for cementitious materials. This research aims to expand the possibilities of incorporating pozzolanic waste such as Steel Slag (SS) as additives to cement. SS is a byproduct of the steel production process. A byproduct of the steelmaking process, slags have long been used as aggregates in building materials like concrete and roads. A closed-loop structure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 341–361 Read article
-
Nanotechnology’s Emerging Frontiers
Abstract: Nanotechnology holds significant promise across diverse sectors, including agriculture, food processing, energy, transportation, and communication systems. This swiftly evolving domain revolves around the development of groundbreaking materials and devices that tackle intricate engineering and scientific hurdles across various sectors. In agriculture and food processing, nanotechnology unfolds a myriad of potentialities. Its potential extends to the development of various products such as nano-fertilizers, nano-herbicides, nano-pesticides, and nano-scale carriers. Additionally, it plays …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 14–23 Read article
-
Interfacial Performance and Structural Stability of Repaired vs. Replaced Polymer-Based Composites: A 3-Year Retrospective Analysis of 'Patch-up' Restorative Engineering
Abstract: Objective: This retrospective study aimed to evaluate the clinical longevity and interfacial success of repairing aged polymer-based composites versus complete replacement, focusing on the integration between the existing polymer matrix and the new restorative material. Materials and Methods: A retrospective clinical audit was conducted on 50 cases (n = 50) of posterior restorations with localized defects. The sample was categorized into: Group A (n = 25), where defective sites were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 180–187 Read article