Search
64 articles for “voltage comparator”
-
An Experimental Investigation of Machining Parameters on Aluminum Composites
Abstract: The need for a material with good mechanical, thermal, and wear resistant properties is satisfied by aluminum composite. However, the biggest obstacle to substituting it with alternative materials is the machining challenges. For this kind of hard-to-cut material, electric discharge machining is a very efficient method. Thus, using a Taguchi-based method, an attempt has been made to determine the most advantageous amount of input parameters for EDM of Al composite. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 8–13 Read article
-
A Neuromorphic-Inspired, Low-Power VLSI Architecture for Edge AI in IoT Sensor Nodes
Abstract: As the proliferation of Internet of Things (IoT) devices continues to rise, there is an increasing demand for real-time, energy-efficient artificial intelligence (AI) processing directly at the network edge. Traditional edge AI accelerators, often based on deep learning models like convolutional neural networks (CNNs), struggle to meet the ultra-low-power requirements of battery-constrained IoT sensor nodes. In response to this challenge, this study introduces a neuromorphic-inspired, low-power very- large-scale integration (VLSI) …
Published in Journal of Microelectronics and Solid State Devices · Vol. 12, Issue 2, 2025 · pp. 41–47 Read article
-
A Physics-Informed Graph Neural Network Framework for Real- Time Thermal-Aware Fault Prediction and Adaptive Power Optimization in Heterogeneous System-on-Chip Architectures
Abstract: Heterogeneous System-on-Chip (SoC) architectures are increasingly adopted in edge computing, artificial intelligence, autonomous systems, and high-performance embedded platforms due to their superior computational efficiency and flexibility. However, increasing integration density and workload diversity introduce severe thermal hotspots, accelerated device degradation, and unexpected hardware faults that adversely affect system reliability and energy efficiency. This study proposes a Physics-Informed Graph Neural Network (PI-GNN) framework for real-time thermal- aware fault prediction and adaptive …
Published in Journal of VLSI Design Tools and Technology · Vol. 16, Issue 2, 2026 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Performance Comparison of Noise-Tolerant, High- Performance CMOS Domino Logic Configurations
Abstract: In high-performance VLSI chip design, domino logic configuration is often preferred over static logic due to its faster operation and smaller area footprint, especially in deep submicron (DSM) technology. However, DSM noise has become a significant challenge in domino-based circuits, leading to compromises in the reliability and signal integrity of integrated circuits (ICs). The switching threshold of domino logic, defined as the input voltage level at which the gate output …
Published in Journal of Semiconductor Devices and Circuits · Vol. 12, Issue 2, 2025 · pp. 35–50 Read article
-
Design and Analysis of PV-based Micro-inverter using INC MPPT Controller and Fuzzy Logic Controller
Abstract: The reserve of conventional energy sources such as coal, natural gas, and crude oil are rapidly decreasing with increasing demand of electricity in the world. Also, the fossil fuels cause air pollution, global warming, and similar environmental problems. Therefore, recent studies have become widespread about renewable energy sources (RESs) such as biomass, hydropower, geothermal, wind and solar which are the most popular worldwide. Among other RESs, solar energy is assumed …
Published in Journal of Microcontroller Engineering and Applications Read article
-
Advancements in Dual-Axis Sun Tracking Solar Panels: Integration and Impact of Weather Sensors
Abstract: In this document, the project suggests this article offers a thorough analysis of the technology, design, and control schemes of a rigid sensor-based dual-axis solar energy tracking system. The results of this inquiry will be valuable to solar energy technology scientists, engineers, and policy makers since they provide information about the most sophisticated dual-axis solar tracking system using hard sensors. Its potential to enhance solar tracking performance is also explored, …
Published in Research & Reviews : Journal of Space Science & Technology · Vol. 13, Issue 2, 2024 · pp. 11–17 Read article
-
Assembly Process and Performance of A Micro Steam Power Plant
Abstract: Energy is an indispensable component of modern society, driving everything from industrial processes to household appliances, among the various sources of energy, steam power, a form of heat energy has played a pivotal role in the development of human civilization, paving the way for the Industrial Revolution and subsequent technological advancements. This study focused on the assembly and performance evaluation of a 5 kW steam power plant. The components of …
Published in International Journal of Industrial and Product Design Engineering · Vol. 2, Issue 2, 2024 · pp. 38–48 Read article
-
IoT-Connected Transparent Conductive Polymer–Silver Nano-wire Electrodes for Real-Time Performance Monitoring of Flexible Solar Panels
Abstract: Flexible photovoltaic technologies have emerged as promising energy harvesting solutions for wearable electronics, portable power systems, and Internet of Things (IoT)-enabled smart devices. However, the limited mechanical durability of conventional transparent conductive electrodes and the lack of integrated real-time monitoring restrict their long-term reliability. This study presents an IoT-connected transparent conductive polymer–silver nanowire (PEDOT:PSS–AgNW) hybrid electrode for flexible solar panels, combining high optoelectronic performance with continuous wireless performance monitoring. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Cooling test's impact on photovoltaic solar panel systems
Abstract: Temperature changes have a massive effect on the performance of photovoltaic (PV) solar panels that are currently extensively used for the conversion of solar power into electrical energy. The output of solar systems is limited, especially in hot climates, as heating of the panel causes output voltage and efficiency to drop. The paper explores the effects of cooling on the quality and performance of photovoltaic (PV) solar panels. In this …
Published in International Journal of Electronics Automation · Vol. 4, Issue 2, 2026 Read article
-
Design of Integrated DC/DC Converter Topology for Hybrid Vehicle
Abstract: Hybrid vehicles traditionally rely on separate DC/DC converters for both the battery and fuel cell, which often leads to increased size, higher costs, energy losses, and limited performance. This paper presents an improved solution: a compact, integrated DC/DC converter with a non-isolated, multi-port design. This new approach simplifies the system by combining the fuel cell and battery into a single, unified converter, reducing the typical drawbacks of conventional designs. The …
Published in Journal of Instrumentation Technology & Innovations · Vol. 15, Issue 1, 2025 · pp. 25–31 Read article
-
Improved Unified Power Quality Conditioner Design and Numerical Simulation for Power Quality Improvement
Abstract: Harmonic currents can distort the waveform voltage, resulting in a weak signal. There is also an increase in the number of loads requiring enough sinus tension to function properly. As electronic devices become more power-sensitive, people are becoming increasingly interested in power conditioning solutions. Therefore, if the amount of electricity being generated falls below a certain threshold, some type of compensation must be provided. Unified Power Quality Controller (UPQC) is …
Published in Journal of Microwave Engineering and Technologies Read article
-
Design and Simulation of Full Adder-Based CMOS 4-2 Compressor using CMOS XOR-XNOR Logic
Abstract: This study utilizes the recent development of CMOS transistors to construct an energy-efficient Full adder-based CMOS 4-2 compressor. The CMOS Exclusive-OR-Exclusive-NOR component and multiplexer used in the transmission logic of the novel CMOS compressor include eight transistors. The XOR-XNOR logic style is the most efficient and effective due to its speed and reduced power consumption. Utilizing an operational supply voltage of 0.7 V and 90nm CMOS technology, the Cadence Virtuoso …
Published in Recent Trends in Electronics Communication Systems · Vol. 12, Issue 3, 2025 · pp. 1–8 Read article
-
Boost Converter with Optimized Pi Controller Design for Grid Tied PV Based Electric Vehicle
Abstract: The growing demand of clean energy along with the depletion of fossil fuel usage have paved the way for electric vehicles (EV) to emerge as a significant alternative in automobile sector. Reduction of air pollution and reliance of fossil fuels thereby improving energy security are termed as the primary goals of EV. The adopting of EV facilitates emission free transportation and addresses the environmental crisis caused due to climatic changes …
Published in International Journal of Electrical Power and Machine Systems · Vol. 3, Issue 1, 2025 · pp. 1–16 Read article
-
Image-Based Crack Morphology Characterisation for Electrical Failure Analysis in Conductive Polymer Composites
Abstract: Electrical performance in conductive polymer composites is strongly governed by crack-network evolution, yet failure analysis typically relies on qualitative image inspection or electrical anomaly detection in isolation. This work proposes an end-to-end framework that converts optical/SEM crack imagery into a standardised crack morphology signature and quantitatively links it to electrical degradation indicators. A two-stage learning strategy is adopted: crack-representation pretraining using the public Concrete Crack Images for Classification dataset, followed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1375-1386 Read article
-
Dielectric Elastomers in Actuation and Energy Applications: Material Behavior and Design Strategies
Abstract: Dielectric elastomers (DEs), a class of electroactive polymers, have attracted significant attention for their ability to undergo large, reversible deformations under electric stimulation. This unique capability makes them highly suitable for a range of actuation and energy harvesting applications, especially in the emerging fields of soft robotics, flexible electronics, artificial muscles, and sustainable power generation systems. DEs offer compelling advantages such as low weight, mechanical flexibility, high energy density, and …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 13–18 Read article
-
Machine Learning Assisted Optimization of Nanoscale MOSFET Parameters Using TCAD Simulation
Abstract: This paper presents a machine learning (ML) assisted framework for the multi-objective optimization of nanoscale bulk n-channel metal-oxide-semiconductor field-effect transistors (nMOSFETs) with a 10 nm physical gate length, high-k HfO₂ gate dielectric, and TiN metal gate. Technology computer-aided design (TCAD) simulations employing drift-diffusion transport, Shockley-Read-Hall recombination, Lombardi mobility degradation, and density- gradient quantum correction models are used to generate a parametric dataset of 2,400 device configurations spanning gate length (L), …
Published in Journal of Microelectronics and Solid State Devices · Vol. 13, Issue 1, 2026 · pp. 10–19 Read article
-
Nanotechnology-Enhanced Battery Management System for Passive Cell Balancing in Lithium-Ion Polymer Batteries for Electric Vehicles
Abstract: The automotive industry is swiftly moving towards eco-friendly innovations, with electric vehicles (EVs) taking center stage in this transformation. A crucial component of these vehicles is the battery, particularly lithium-ion polymer batteries, which exhibit superior performance compared to other battery types. However, these batteries are sensitive to both overvoltage and undervoltage conditions, posing potential safety risks. Additionally, imbalances between individual cells can degrade battery performance and reduce its service life. …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 3, 2024 · pp. 27–34 Read article
-
Growth of Cu2O on TCO by SILAR method acts as an alternative buffer electrode layer towards the development of organic solar cell
Abstract: In many types of optoelectronic devices, layer of PEDOT: PSS is sandwiched between the indium-tin oxide (ITO) electrode and the active layer. Buffer PEDOT: PSS provides a well- defined work function which is higher than that of ITO (4.2eV), it smooths the ITO surface and so avoids shorts, and it also protects the active layer from ingress of indium or oxygen, leading to longer device lifetimes. The role of PEDOT: …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 18–25 Read article
-
Farmer’s Eye: A Sustainable Crop-Field Monitoring System
Abstract: This paper outlines the creation and implementation of an Internet of Things (IoT)-driven smart agriculture monitoring system. It aims to tackle major issues in agriculture, such as inefficient irrigation, excessive resource use, and a lack of real-time data. The system focuses on the Arduino Uno, which connects to a variety of sensors: soil moisture for measuring substrate conditions, DHT11 for monitoring ambient temperature and humidity, MQ135 for checking air quality, …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 15, Issue 1, 2026 · pp. 19–27 Read article