Search
130 articles for “strength reduction”
-
Comparative Analysis of Sustainable Materials in Road Construction: A Review
Abstract: The immediate need for sustainable infrastructure has driven research into new materials in road construction with the goal of reducing environmental degradation and enhancing resource efficiency. This review is a comparative analysis of four innovative technologies involving industrial and natural waste products: recycled aggregates from construction and demolition (C&D) waste, feldspar powder from lithium mining, stabilized dam sediments using eucalyptus ash, and calcium carbide residue (CCR) blended with dredged sludge. …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 93–98 Read article
-
Production of Injection Moulded Natural Fiber Reinforced Hybrid Composites and Assessment of Hybridization’s Effect on Mechanical Properties
Abstract: Over the past two decades, rising environmental awareness, public concern over waste, and stricter government regulations have encouraged companies to reduce their reliance on petroleum-based fuels and products. Consequently, there is a clear need to find sustainable, eco-friendly substitutes for the materials currently in use. This shift has renewed attention on renewable resources and sparked wider interest in advanced composites and green materials research. With this in mind, the present …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 246–271 Read article
-
Composite Gel-Fibers and Solid-State-Processed Tapes Based on Disentangled Ultra-High Molecular Weight Polyethylene and Electrically Conductive Carbon Black: a Comparative Study
Abstract: In this study, oriented nanocomposite gel-spun fibers and solid-state-processed tapes were manufactured and analyzed. The fibers and tapes were produced using a specific type of nascent disentangled ultra-high molecular weight polyethylene (UHMWPE) reactor powder. As the filler, commercially available electrically conductive carbon black (CB) was used. The ultra-high filler content values up to 75 wt.% were achieved for the UHMWPE/CB gel-spun fibers, while the degree of filling was limited (up …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 151–165 Read article
-
Experimental and Process Optimization Study on Thermal Stress Reduction in TiC–Steel Brazed Joints Using Polymer-Derived Composite Interlayers
Abstract: In this, an experimental investigation aimed at reducing crack formation due to thermal stress in TiC-steel brazed joints through optimization of key process parameters is presented. The primary objective was to develop an integrated and reliable brazing strategy by examining the effects of filler material selection, brazing gap, cooling conditions and type of flux. In this study, polymer-derived composite interlayers were developed through controlled synthesis and nanocomposite engineering to mitigate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 524–540 Read article
-
Geopolymer Concrete with Cenosphere as Fine Aggregate: A Material Characterisation
Abstract: Geopolymer concrete (GPC) is regarded as the successor to traditional concrete as it eliminates the requirement for conventional Portland cement during its manufacturing process, hence decreasing CO2 emissions. This study employed Cenosphere, which are lightweight fine materials, to partially substitute the volume of sand in GPC. Cenosphere was utilized in proportions of 20%, 40%, 60%, and 100%. This experiment examined the fresh and hardened characteristics, durability against freezing and thawing, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 143–151 Read article
-
Performance Evaluation of Rubber Crumb-Modified Bitumen for Sustainable Pavement Applications
Abstract: This research investigates the effect of rubber crumb modification on the physical and mechanical properties of VG-40 bitumen for flexible pavement applications. Rubber crumbs were incorporated at varying percentages (0, 8, 10, 12, 14, and 16%) to analyze their impact on penetration, softening point, ductility, and elastic recovery. Additionally, the Marshall stability test was conducted to evaluate the strength and deformation characteristics of the bitumen mix. The results demonstrated a …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 20–24 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Nano Shield-EV: Graphene and CNT-Infused Polymer Composites for Advanced EMI Shielding in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for lightweight, thermally stable, and mechanically robust electromagnetic interference (EMI) shielding materials to ensure the reliable performance of advanced electronic systems. Traditional metallic shields, though highly effective, increase vehicle weight and restrict design flexibility, thereby motivating the search for multifunctional polymer-based alternatives. In this study, NanoShield-EV introduces novel polymer nanocomposites fabricated via melt blending and compression molding, combining engineering-grade …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1036–1047 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Effect of Nanoclay Loading on Physical and Mechanical Properties of Epoxy Composites
Abstract: The effects of multilayer silicate loading on hardness, tensile, and impact properties were examined by developing epoxy–nanoclay composites with 0–5 wt% nanoclay. A desirable compromise between reduced void content and higher Shore D hardness was reached with an ideal nanoclay loading of 3 wt%, which reflected improved load transfer and increased matrix stiffness as a result of limited polymer chain mobility. Tensile strength and modulus rose up to 3 wt% …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 36–45 Read article
-
Tribological Behaviour of PTFE based Composite Materials with Different Filler Materials: A Combine Numerical and Experimental Approach
Abstract: This study investigates the tribological behaviour of Polytetrafluoroethylene (PTFE) composites reinforced with various fillers, utilizing the Archard wear model to analyse wear mechanisms and predict wear rates. PTFE is widely recognized for its excellent chemical resistance and low friction, but its inherent wear resistance is relatively poor. To enhance its tribological properties, fillers such as glass fibres, carbon fibres, bronze, and graphite were incorporated into the PTFE matrix. In the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 547–557 Read article
-
Next-Generation Lightweight Nanocomposite Structures for Electric Mobility
Abstract: The rapid expansion of the electric vehicle (EV) sector has intensified the demand for battery enclosures that are lightweight, mechanically strong, thermally stable, and environmentally sustainable. This research focuses on the design and sustainable fabrication of hybrid nanocomposites for advanced EV battery housings. The proposed material system integrates carbon fiber, glass fiber, and graphene nanoplatelets within a bio-based epoxy matrix, resulting in improved mechanical strength, enhanced thermal stability, and superior …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1147–1156 Read article
-
Lightweight Composite Materials for Electric Vehicles (EVs) and Public and Private Transport
Abstract: The rapid expansion of the electric vehicle (EV) industry has intensified the demand for battery enclosures that are lightweight, durable, thermally stable, and environmentally sustainable. This study investigates the design and sustainable fabrication of hybrid nanocomposites for advanced EV battery housings. The proposed composite system combines carbon fiber, glass fiber, and graphene nanoplatelets within a bio-based epoxy matrix, resulting in superior mechanical strength, enhanced thermal stability, and excellent flame retardancy.A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 470–481 Read article
-
Multi-Objective Optimization of Polymer-Based Functionally Graded Composites for Lightweight Structures
Abstract: Functionally graded composites (FGCs) improve lightweight structural performance by allowing material properties to change smoothly across a component. Polymer-based FGCs (P-FGCs), in particular, are gaining prominence in aerospace, automotive, and biomedical industries due to their excellent strength-to-weight ratio, tunability, and ease of processing. However, optimizing these materials for lightweight structural applications requires addressing conflicting design objectives, such as maximizing stiffness while minimizing weight or enhancing thermal resistance while maintaining manufacturability. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 961–973 Read article
-
Enhanced Mechanical and Tribological Performance of Magnesium–Boron Carbide Composites Fabricated via Stir Casting for Lightweight Structural Applications
Abstract: This study investigates the fabrication and evaluation of properties of magnesium (Mg) matrix composites reinforced with boron carbide (B₄C) for lightweight structural applications. Stir casting was employed to incorporate B₄C particles at varying weight fractions (0%, 3%, 6%, and 9%) into the magnesium matrix. The influence of B₄C on density, porosity, hardness, tensile strength, and wear resistance was systematically examined. Theoretical density increased from 1.74 g/cm³ (pure Mg) to 1.88 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 29–39 Read article
-
Fabrication of Belt for Backpack for Students to Reduce the Musculoskeletal Disorders using ABS material 3D Printing
Abstract: In the present study, the design and development of a composite-based belt aim to reduce the excessive burden on the backs of schoolchildren, which often leads to musculoskeletal disorders (MSD). The belt is designed using CATIA 3D modeling software and fabricated on an FDM-based 3D printer with ABS polymer. The design process focuses on addressing physical stress caused by heavy backpacks and prolonged use of electronic devices, both of which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1110–1117 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
A Systematic Review of Advanced Composite Materials for High-Performance Spur Gear Applications
Abstract: This is a review which provides specific and detailed information regarding the fiber-reinforced polymer (FRP) composite to replace traditional steel in high-performance spur gears with emphasis on mechanical performance, computational modeling, and experimental validation. Methods: The current literature was thoroughly investigated that includes material properties, material simulation (e.g., finite element analysis, FEA), and experimental gear testing procedures (e.g., DIN 51354, ASTM G99). Certain case studies in the aerospace and automotive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 209–220 Read article
-
Design and Characterization of High-Performance Polymer Nanocomposites for Aerospace Applications
Abstract: Polymer nanocomposites have revolutionized aerospace materials through mechanical strength, thermal stability, and lightness. A number of polymer matrices filled with nanofillers such as carbon nanotubes, graphene, and nanoclay considerably improved structural integrity, flame resistance, and environmental adaptability. However, fabrication techniques are still being optimized so that nanofillers are properly dispersed throughout, which may create contradictions between mechanical strength and process ability. This work tries to design and characterize high- performance …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 178–193 Read article
-
A Ponder & Sedulousness Of Legion Shale Stabilizing Materials In Aqueous Based Drilling Fluid During The Process Of Borehole Strengthening
Abstract: Drilling fluid used while drilling the layers of shale will have the potential of reacting with water which tends to increase stickiness, induce swelling and promote sloughing of the borehole. This results in the reduction of drilling fluid circulation, increased mud loss, increase in torque and drag, reduction in lubricity. This will ultimately result in the increase of Non-Productive Time (NPT) during drilling which in turn increases Capital Expenditure (CAPEX) …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 35–40 Read article