Search
121 articles for “environmental loads”
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Hybrid Polymer Composites Containing GGBS and Copper Slag: A Review of Mechanical Behavior and Interfacial Mechanisms
Abstract: Over the past few years, there has been a push to seek sustainable solutions through material science in the field of industrial by-products that can be used in polymer composite systems. Two such substances are ground granulated blast furnace slag (GGBS) and copper slag that have demonstrated a promising potential because of their abundance and useful physical and chemical properties.This review is dedicated to the application of GGBS and copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Performance Evaluation of Eichhornia crassipes and Pista Stratiotes for Treatment of Aquaculture Wastewater
Abstract: The significance of wastewater management and disposal in aquaculture is growing steadily as a result of strict water regulations pertaining to the release of waste into natural water systems. The conventional methods are expensive to manage and thus, it is not sustainable especially in the developing countries. Therefore, the objective of this research is to utilize Eichhornia crassipes (Water hyacinth) and Pistia stratiotes (Water lettuce) in phytoremediation techniques as an …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 1, 2025 · pp. 46–54 Read article
-
Data-Driven Energy Forecasting for Smart Homes: Ensemble Learning from IoT Meters and Relevance for Polymer-Composite Based Smart Infrastructure
Abstract: Reliable estimation of household electricity demand is relevant in creating efficiency in energy usage, optimization of the loads, and intelligent demand-side management in intelligent grid systems. This paper introduces a varied machine learning model that approaches residential electric consumption prediction using an assortment of ensemble regression boosts, including Linear Regression, Lasso Regression, Decision Tree Regressor, Random Forest, and Gradient Boosting, to predict residential electricity consumption environments on a time-series arrested …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 29–64 Read article
-
Pneumatic Operated Engine
Abstract: The increasing awareness of fossil fuel depletion & environmental pollution has accelerated the need for the development of sustainable & eco-friendly alternatives to traditional internal combustion engines. Pneumatically operated engines have been identified as a potential alternative for small-scale mechanical power generation owing to their advantages of zero exhaust emissions, noise reduction & operational safety. This paper describes the design, development & performance analysis of a pneumatically operated engine, which …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 1, 2026 · pp. 1–7 Read article
-
A Review of Failure Investigations and Its Techniques
Abstract: Valve failure poses a significant financial risk in the offshore oil and gas industry. Serious repercussions from this problem could include property damage and lost output from operational shutdowns. Additionally, it can lead to serious health, safety, and environmental (HSE) concerns such as oil and gas leaks, environmental contamination, and potential fatalities. In the Norwegian offshore industry, different kinds of valve failures have happened for a number of reasons, including …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 33–41 Read article
-
Engineering Polymer Innovations for Improved Battery Safety and Vehicle Efficiency: A Comprehensive Review
Abstract: Electric vehicles (EVs) are high-power systems that require high-quality materials to ensure safety, reliability, and performance under extreme operating conditions. Polymer materials have become critical engineering materials in meeting these requirements due to their lightweight nature, design flexibility, durability, and high electrical insulation capability. Consequently, polymers are widely used in key EV components, including battery enclosures, module frames, thermal interface materials, wiring insulation, and lightweight structural parts.Recent developments in polymer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 500–512 Read article
-
Automation of 1.5tr Air Conditioning Systems Used in Different Cabins in Different Areas
Abstract: India is the world's most populous country and temperatures in many states regularly exceed 40°C. Therefore, people living in humid climates need a means to control temperature. Scientists have determined that human comfort is between 22°C and 27°C. This research determines all the properties of air relevant to the operation of water pipes. Exploring automation in air conditioning systems with Passive Infrared Sensor is to develop and implement intelligent climate …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 1, 2024 · pp. 1–8 Read article
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
Aerodynamic Effects of Wind on Multi-Story Structures: A Height- and Terrain-Based Analysis
Abstract: Wind loads are a critical consideration in the structural design of buildings, with direct implications for safety and serviceability. This study investigates the aerodynamic behavior of reinforced cement concrete (RCC) buildings under varying heights and terrain conditions, in accordance with IS: 875 (Part 3): 2015. 12 structural models representing 20 m, 35 m, and 50 m tall buildings were analyzed using extended three-dimensional analysis of building system (ETABS) across four …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 3, 2025 · pp. 1–14 Read article
-
Corn Husk Fiber–Reinforced PLA Biocomposites: Mechanical, Thermal, and Biodegradation Performance
Abstract: The increasing environmental burden caused by conventional petroleum-based plastics has driven significant interest in the development of sustainable polymer composites reinforced with renewable natural fibers. In the present work, corn husk fiber (CHF), an agricultural waste by-product, was utilized as a reinforcing phase in a polylactic acid (PLA) matrix to fabricate eco-friendly biocomposites. Composite samples with varying fiber loadings (0–40 wt.%) were produced through twin-screw melt blending followed by compression …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 312–327 Read article
-
Multimodal Data Fusion with Hybrid Machine Learning for Enhanced Prediction of Li-Ion Battery Remaining Useful Life and State of Charge
Abstract: Lithium-ion battery materials used in modern energy storage systems are required to exhibit high reliability, safety, and long lifecycle performance under varying operational and environmental conditions. Accurate prediction of Remaining Useful Life (RUL) and State of Charge (SoC) is therefore essential for understanding material degradation behavior, improving manufacturing quality, and enabling effective lifecycle management. However, nonlinear electrochemical aging, load variability, and thermal uncertainty significantly complicate accurate estimation of these parameters. …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 1–5 Read article
-
High-Velocity Impact Response of CFRP and Hybrid Composites: A Comprehensive Review on Ballistic Resistance and Damage Mechanisms
Abstract: This review consolidates recent advances in the study of high-velocity impact response of carbon fiber reinforced polymer and hybrid composites. Carbon fiber reinforced polymer composites are widely applied in aerospace, automotive, and defense due to their high strength-to-weight ratio, stiffness, and durability. However, their susceptibility to impact damage such as delamination, matrix cracking, and fiber breakage limits their performance under dynamic loading. To overcome these challenges, researchers have explored reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 100–122 Read article
-
Comprehensive Introduction: Epoxy and Polyurethane Floor Coatings—A Critical Evaluation for Modern Industrial Applications
Abstract: Industrial flooring systems are essential for ensuring operational durability, safety, and longevity in demanding environments. Epoxy and polyurethane (PU) coatings represent two predominant technologies, each offering distinct mechanical, chemical, and aesthetic profiles tailored to specific performance requirements. Epoxy systems, formed through the crosslinking of bisphenol-A-based resins with amine hardeners, excel in high-strength, chemically aggressive settings due to their superior hardness, adhesion, and chemical inertness. In contrast, PU coatings, synthesized from …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 14–23 Read article
-
Piezoelectric Energy Harvesting Using A 10x10 Sensor Matrix with Integrated Circuit Design for Pressure Control
Abstract: This project aims to create a system that generates energy using piezoelectric technology, designed as a rectangular tile platform. The platform has two layers of sensors arranged in a 10 × 10 grid, connected in a mix of series and parallel setups. The top layer acts as a surface for external forces, like footsteps, while springs connect the layers to control pressure and maximize energy generation. A rectifier ensures the …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 2, Issue 2, 2024 · pp. 47–53 Read article
-
Design and Development of Pedalled Powered Electricity Generation
Abstract: Pedal power energy harvesting transforms the mechanical energy produced by pedalling into electrical energy, which can be used to operate devices or saved for future use. The strategy utilizes the physical exertion of pedalling to generate a reliable and eco-friendly energy source. This project aims to develop, construct, and demonstrate a functional mechanism. The generator utilizes the motion of pedalling a regular bicycle to generate electricity. The main goal of …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 16, Issue 1, 2025 · pp. 30–36 Read article
-
Distributed Load Shedding in Energy Distribution System with IoT
Abstract: This project is designed to develop a modern power distribution and control system which is a very thoughtful one in reducing unwanted power usage in modern times. It is a microcontroller operated system where we fix a maximum power limit for each consumer. Night time is considered to be the peak time for energy consumption, to be precise from 6pm to 11 pm. Here we program the microcontroller to cut …
Published in Trends in Electrical Engineering · Vol. 14, Issue 2, 2024 · pp. 1–9 Read article
-
Performance Evaluation of Rubber Crumb-Modified Bitumen for Sustainable Pavement Applications
Abstract: This research investigates the effect of rubber crumb modification on the physical and mechanical properties of VG-40 bitumen for flexible pavement applications. Rubber crumbs were incorporated at varying percentages (0, 8, 10, 12, 14, and 16%) to analyze their impact on penetration, softening point, ductility, and elastic recovery. Additionally, the Marshall stability test was conducted to evaluate the strength and deformation characteristics of the bitumen mix. The results demonstrated a …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 20–24 Read article
-
A Review on Structural Design Analysis and Environmental Auditing of Railways
Abstract: In the present time, Indian railway is the major transport medium. It is so efficient, economic, and services are moderate eco-friendly technology. Changes are on the basis of engineering, logistics, time and luxury. The new structure has faced lots of challenges and every day demands led to some changes day to day. In so many years of Indian railway the tracks are challenging and quite tough which carries lots of …
Published in Journal of Energy, Environment & Carbon Credits Read article
-
Evaluating The Durability and Environmental Sustainability of Hybrid Natural - Synthetic Fiber Composites
Abstract: This study examines the characteristics of hybrid composites composed of natural fibers (such as jute, hemp, or kenaf) and synthetic fibers (such as glass or carbon) integrated within polymer matrices. The hybridization method seeks to enhance the advantages of both fiber types, hence augmenting overall performance relative to single-reinforced composites. Mechanical properties like tensile strength, flexural strength, impact resistance and hardness were evaluated through experimental tests. The results demonstrate that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 93–102 Read article