Search
423 articles for “deposit”
-
Photoelectrocatalytic Degradation of Methylene Blue and Inactivation of Escherichia coli by Spray Deposited Au:ZnO Thin Films
Abstract: Abstract Spray deposited Au-doped ZnO thin films were successfully prepared by using zinc acetate as precursor onto the glass and fluorine doped tin oxide (FTO) coated glass substrates at 4000C. In this study, the polycrystalline Au:ZnO films were prepared with the different Au concentration in the starting solution varying from 0 to 4%. The optimized Au doping concentration was 3%. The direct optical band gap of the Au:ZnO film (3% …
Published in Journal of Water Pollution & Purification Research · Vol. 3, Issue 3, 2016 · pp. 37–47 Read article
-
Morphological, Optical and Structural Studies of Deposited ZnO Films by SILAR Method for Solar Energy Applications
Abstract: The deposited ZnO films were grown on glass substrates using the Successive Ionic Layer Adsorption and Reaction. The morphology of the deposited ZnO is that of flower-like bud.The optical properties were characterized using UV/VIS spectroscopy, the optical band gap decreases with increasing reaction time, and these films have band gap values of 3.19eV, 3.22eV, 3.24eV and 3.25eV. The crystal structure of the films were also characterized using the X-Ray Diffraction …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 4, Issue 3, 2013 · pp. 7–12 Read article
-
Study of CdS/AZO/FTO, CdS/FTO and CdS Thin Films Deposited by Modified Double Layer Thermal Evaporation
Abstract: The CdS/AZO/FTO, CdS/FTO and CdS thin films were deposited by a modified double-layer vacuum evaporation technique. The 90 nm of double-layer CdS thin films were prepared with the bottom layer 50 nm thick and the upper one was 40 nm thick and respective substrate temperatures were 100oC and 70oC. The physical properties of thus prepared films were characterized using X-ray diffraction (XRD), UV-VIS-NIR spectrophotometer, Hall Effect Measurement System and Scanning …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 9, Issue 2, 2019 · pp. 56–63 Read article
-
Assessment of Reservoir Storage Capacity and Silt Deposition Using Advanced Instruments: A Case Study
Abstract: Reservoirs on the upstream side of sediment-laden river dams fill with sediment over time, lowering their storage capacity. This research focuses on advanced instrumentation techniques used to analyse storage capacity and estimate the quantity of sedimentation deposited in the reservoir at Kadana Dam, Kadana Village, Mahisagar District, Gujarat, India. During the research investigations, a multi-frequency acoustic system with frequencies of around 33 KHz and 210 KHz was employed to assess …
Published in Journal of Control & Instrumentation · Vol. 13, Issue 4, 2022 · pp. 27–37 Read article
-
Comparative Experimental Investigation of Infill Pattern and Infill Density on Fused Deposition Modeling (FDM) Process Characteristics of Polylactic Acid (PLA)
Abstract: Additive manufacturing is the potential and emerging technology widely being used to produce quality products with complicated profiles and customized features. Fused Deposition Modelling (FDM) process, a type of additive manufacturing technology using filament made of thermoplastic which is melted and subsequently extruded through nozzle. The main input process parameters of FDM are wall thickness, infill density, layer height, bed temperature, layer thickness, infill pattern, nozzle temperature etc. In this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 335–345 Read article
-
Dosing Control of Urea in Selective Catalytic Reduction (SCR) to enhance the reduction of Nitrogen oxides
Abstract: Selective Catalytic Reduction (SCR) is an effective aftertreatment technique designed to comply with rigorous emission criteria established by global regulatory authorities for the elimination of nitrogen oxides from exhaust streams. Since NOx and ammonia reagents are poisonous and an excess of either is therefore very undesired, it poses an intriguing control problem, particularly at high conversion. SCR systems must reduce NOx emissions as much as possible and reduce the possibility …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 110–120 Read article
-
Assessment of Reservoir Storage Capacity and Silt Deposition Using Advanced Instruments: A Case Study
Abstract: Reservoirs on the upstream side of sediment-laden river dams fill with sediment over time, lowering their storage capacity. This research focuses on advanced instrumentation techniques used to analyse storage capacity and estimate the quantity of sedimentation deposited in the reservoir at Kadana Dam, Kadana Village, Mahisagar District, Gujarat, India. During the research investigations, a multi-frequency acoustic system with frequencies of around 33 KHz and 210 KHz was employed to assess …
Published in Journal of Control & Instrumentation · Vol. 12, Issue 3, 2021 · pp. 27–37 Read article
-
Economic Importance of Laterite Deposit in Oke-Oyi Area, Ilorin, Nigeria
Abstract: Two soil samples A and B were taken from Oke-Oyi, Kwara state, North Central, Nigeria. The water content of the samples are 5.8% and 6.5 for sample A and B respectively. This shows the variability in water table in the area. The specific gravities values are 2.7 and 2.78 for samples A and B, this is an indicator of inorganic soil. Grain size analysis show the laterite to be sandy …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 1, 2023 · pp. 33–37 Read article
-
Performance Analysis of Efficiency of Solar Photovoltaic Module on Dust Deposition
Abstract: The rise in demand for energy and the continuous decrease in existing sources of fossil, have push mankind to explore new technologies for improving utilization of green energy. Solar energy is one of the promising sources to meet the increasing demand of electricity. There are factors that affect the performance of Photovoltaic (PV) modules. One such is dust deposition. The solar PV modules polluted by dust particles for a period …
Published in Journal of Power Electronics and Power Systems · Vol. 12, Issue 1, 2022 · pp. 22–30 Read article
-
Extent of Beneficiation of Tsopoli and Akuse Clay Deposits as Drilling Fluids Materials
Abstract: The need to source for a local material for the design of drilling fluid has necessitated the study of two smectite clay reserve deposits which are abundant in Ghana and have been the subject of study for many years for other engineering disciplines. A study of their degree and extent of beneficiation quantities has been carried out using standard rheological and filtration test as well as governing protocols while at …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 15–37 Read article
-
Deposition of Antimony Trioxide on the Composite Surface to Increase Its Flame Retardancy
Abstract: In the present work, the preparation method of antimony trioxide and its thermal properties were extracted, as well as identified the manufacturing method to form an insulation layer from this oxide as a thickness of the covering layer (2 mm), deposited on the composite material consisting of unsaturated polyester resin and glass fiber which acts as a paste and take for the material to the insulation and flame retardant oxide. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 1, 2015 · pp. 1–3 Read article
-
Monitoring the Variations Influence of Bacterial Transport Coefficient on Rhodopseudomonas Depositions in Natural Pond
Abstract: This paper monitored the transport reflecting Rhodopseudomonas concentration in natural pond, the study express the rate of predominant influence from bacterial transport coefficient in the migration and deposition of Rhodopseudomonas in the study environment, the rate of bacterial transport coefficient in the natural pond shows that there is the tendency of partial immobile velocity in the pond, these factors reflected on the transport system of Rhodopseudomonas in the natural pond. …
Published in Recent Trends in Fluid Mechanics · Vol. 7, Issue 3, 2020 · pp. 24–39 Read article
-
Study on CdS Nanoparticles and Nanocrystalline Thin Films Synthesized by Chemical Bath Deposition Technique
Abstract: Normal 0 false false false EN-US X-NONE X-NONE Cadmium Sulfide (CdS) nanoparticles and nanocrystalline thin films were synthesized by chemical bath deposition technique at room temperature. The elemental composition of the as-grown CdS nanoparticles and nanocrystalline thin films were determined by energy dispersive analysis of X-rays (EDAX). Crystallite size and lattice parameter were determined from X-ray diffractogram whereas transmission electron microscopy (TEM) image gave particle size and the selected area …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 1, Issue 3, 2011 · pp. 8–15 Read article
-
A Comprehensive Analysis of Coating Technology and Thin Films
Abstract: In contemporary materials science, thin film and coating technologies are essential because they allow for the improvement of surface characteristics, including electrical conductivity, hardness, corrosion resistance, and optical performance. These technologies use physical, chemical, or hybrid deposition techniques to deposit materials in layers that range in thickness from a few nanometres to several micrometres, depending on the required functional properties and application areas. The content, thickness, and microstructure of films …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 50–64 Read article
-
UTM Testing and Comparison of Mechanical Properties of Composite Material Specimens Manufactured using Fused Deposition Modeling
Abstract: 3D printing has become a popular way for prototyping of components instead of conventional methods due to quickly results obtained and a variety in properties of process possible. In this paper our aim is to elaborate on differences between strength and other Mechanical properties of abs plastic, carbon fiber + abs and glass fiber + abs filament for additive manufacturing. For this procedure for this research filament has been acquired …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 3, 2020 · pp. 37–43 Read article
-
The Influence of Sediment Deposits in the Threshold Criteria of Sediment Movement in Rigid Boundary
Abstract: An effort is made to develop a simplified methods for the estimation of bed shear stress for rigid boundary for initiation of sediment motion using different bed thickness, bed slopes and different sediment particles diameters (ranging between (0.5mm < d50 < 4.78). The findings were compared with the earlier studies demonstrating that critical shear parameter value for fixed beds is less than the reported values in literature. This come in …
Published in Recent Trends in Civil Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 31–39 Read article
-
Surface Modification by Electro-discharge Coating and Its Characterisation
Abstract: Applications of coated surface are swiftly increasing in present industrial context. Recently, the electro-discharge route is being explored for surface modification in terms of alloying and layer deposition. Electro-discharge machining parameters and response to surface deposition is of the research interest in electro-discharge coating. In this regard, electro-discharged surface modifications have been characterized in the present investigations. The effect of relevant EDM parameters (current, Pulse duration, duty factor, density of …
Published in Trends in Mechanical Engineering & Technology · Vol. 3, Issue 2, 2013 · pp. 43–50 Read article
-
ANN Controlled Plasma Spray Process by using Industrial Waste
Abstract: Plasma spray coating process has become a subject of intense research because it becomes an affordable solution for many industrial applications. The present work aims at developing and studying the industrial wastes (Flay-ash powder mixture) as the coating material, which is to be deposited on Mild Steel and Cupper substrates. To increase the coating deposition efficiency and to decrease the cost of coating process, one of the artificial intelligence (AI) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 1–6 Read article
-
Assessment of Carbon Fibre (CF) and Carbon Nanotube (CNT) as Supercapacitor Electrode on Surface Activated Nickel Foam
Abstract: In present paper, an attempt has been made to compare the potential of two different carbon-based materials, Carbon Fibre (CF) and Carbon Nanotubes (CNT), as electrode materials. These two materials are compared against each other in terms of their dimensions, volume of deposition on Nickel foam and their performance under Cyclic Voltammetry (CV). It was observed that owing to the dimensions of the depositing material, CNT (nano-sized carbon) electrode reflected …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 2, 2023 · pp. 10–14 Read article
-
A Critical Analysis of Cold Spray Coatings and its Tribological Performances
Abstract: Coatings are utilized for temperature barrier, protection against corrosion and wear etc. Cold spray is a solid-state processing method that is unique among thermal deposition procedures since it deposits particles at temperatures below their melting point. This technology does not involve particle melting, hence retaining the original properties of the materials. Increased coating strength is achieved by retaining of feedstock powder microstructures and characteristics, which prevents oxide formation and other …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 220–226 Read article