Search
78 articles for “Shear tests”
-
The Role of Surface Treatments on Mechanical and Interfacial Shear Strength of Pineapple Leaf Fibers
Abstract: Natural fibers are seen as having potential application as reinforcing agents in polymer composite materials due to their main advantages, which include moderate strength and stiffness, low cost, and being an environmentally beneficial, degradable, and renewable material. They are susceptible to absorbing moisture because of their innate hydrophilicity, which can weaken or plasticize the adherence of the fibers to the surrounding matrix and impact the performance of composite materials employed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 18–28 Read article
-
A Comparative Evaluation of a 13-story G+ Building with a Soft Storey, Using Pushover Analysis, with a Focus on the Impact of Different Placement of Shear Walls
Abstract: Asymmetrical structures with varying degrees of irregularity have proven to be a significant factor in causing collapses, damage to property, and injury during earthquakes. Despite extensive research on asymmetric buildings, there are currently no established guidelines for multi-story structures of this type. A soft storey, also known as a weak storey, is a level in a structure with insufficient rigidity or ductility to sustain earthquake-induced damage Pushover analysis has been …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 1–9 Read article
-
Study of Shear Strength and Hardness of Resistance Spot Welding for Automotive Applications
Abstract: Resistance spot welding is the most popular process used in automotive and aerospace for joining of sheet metals of different thicknesses, shapes, and materials. There has been already much research done on the resistance spot welding. This review paper gives an overview of the performance of resistance spot welds in an automobile. For this, AWS D8.9M:2012 (Test Methods for Evaluating the resistance spot welding behaviour for automotive steel sheet materials) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 1–9 Read article
-
Flexural Characterization of Sandwich Composites; Effect of Varying PU Foam Density and E-Glass Fabric on Flexural Strength
Abstract: AbstractThis paper presents the results of an extensive investigation on flexural behavior and failure mechanisms of sandwich composites with polyurethane (PU) foam core and glass reinforced vinylester as facesheet. The sandwich structures with PU foam of varied density and glass fibres of different architecture are tested under three point bending. The experimental values of face bending strength (FBS) and core shear stress (CSS) are evaluated. Effect of core density and …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 29–43 Read article
-
Microstructural Evolution and Mechanical Performance of Ambient-Cured Fly Ash–Metakaolin Inorganic Polymer Composites Activated by Anhydrous Sodium Silicate Powder
Abstract: Inorganic geopolymer networks offer a low-carbon and sustainable solution to traditional binder systems through the alkali-activation of industrials-grade aluminosilicate material. The present paper focuses on the microstructure development and the mechanical performance of the ambient-cured fly ash – metakaolin inorganic polymer composite activated with solid anhydrous sodium silicate powder. Five inorganic polymer binder combinations were formulated by replacing fly ash with metakaolin at mass fractions of 0%, 10%, 20%, 30%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Damage Evolution and Delamination Resistance in Polymer Matrix Functionally Graded Laminates
Abstract: Functionally graded laminates (FGLs) in polymer-matrix systems represent a promising pathway to enhance damage tolerance and delay delamination in advanced structural composites. In this study, we explore the mechanisms of damage initiation, propagation, and delamination resistance in polymer matrix functionally graded laminates (PM-FGLs) through a combined experimental–computational approach. Laminates with linear, exponential, and bio-inspired gradation profiles were fabricated using vacuum-assisted resin transfer molding (VARTM) and additive manufacturing techniques. Comprehensive mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 321–337 Read article
-
Considerations on Fractured Edge Dislocations of Mechanical Tested Hand Laid Hemp Flax GFRP Hybrid Polymer Composites with SEM Verifications
Abstract: In this research study, three types of composite samples are made. Hemp-Glass Fiber (C1), Flax- Glass Fiber (C2), and Hemp-Flax-Glass Fiber Hybrid Composite (C3). For proper fibre-to-fiber adhesion and bonding, a 10:1 mixture of glue (LY556) and brace (HY951) was used. Tensile, flexural, impact, double shear, and hardness research is conducted among all the specimen samples. According to ASTM standards, the comparison is made among C1, C2 and C2 respectively; …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 1–19 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Effect of Hooked-end Steel Fibre Incorporation in the Performance of Slag Based Geopolymeric Concrete Mixes
Abstract: In this study the efforts have been undertaken to evaluate the performance of slag based geopolymer concrete (GC) when hooked-end steel fibres have been incorporated in different percentages i.e. 0%, 0.5%, 1.0%, 1.5% and 2.0% to the mix. The alkaline activator used in this study was the dissolution of solid sodium hydroxide flakes in liquid state sodium silicate solution, dissolved in water. The compressive strength, split-tensile strength, shear strength and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 2, 2020 · pp. 28–35 Read article
-
Probable Causes of Cracks on selected Buildings at Akrowa in Afigya Kwabre District, Ghana
Abstract: This work evaluated the nature of the foundation soils and cracks on twelve representative buildings at Akrowa, in the Afigya Kwabre District near Kumasi in Ghana. Age, material used whether clay/concrete, dimensions of cracks on the buildings and tests for geotechnical parameters of foundation soils such as moisture content, bulk density, specific gravity, particle size distribution, Atterberg limit and direct shear were carried out on soils from four pits dug …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 3, 2023 · pp. 29–39 Read article
-
A Laboratory Methodological Proposal for “Geotechnical Lime Stabilization of A-4 Soils”
Abstract: This paper establish the beginning of a research process regarding the behavior of soils stabilized with lime. Generally, the geotechnical practice of soils stabilized with lime requires a first step conducted in the laboratory, to attest the features of “natural soils” in order to improve their behavior in term of geotechnical performance and, a second step, carried out onsite with experimental test fields, in order to verify the benefit obtained …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 1, 2021 · pp. 1–11 Read article
-
Assessment of Scouring of Bank of River
Abstract: The thrust of water due to standing water and velocity of flow are taken. In flood cases, more depth of water and more velocity are to be taken and it is seen whether the embankment is safe or not. The maximum velocity of flow = 1.2 d taken where d is the depth of flow of water. The bearing strength of the soil of the embankment should be taken against …
Published in Journal of Water Resource Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 43–50 Read article
-
Soil liquefaction vulnerability assessment of Sylhet city based on SPT value
Abstract: Bangladesh is an earthquake-prone country due to its geographic location. Sylhet, a divisional city, is situated in Zone IV, the most seismically active area in the country, according to the Bangladesh National Building Code (BNBC). A major earthquake can cause devastating effects in the subsurface, such as liquefaction, landslides resulting from a reduction of soil shear resistance. In this study, liquefaction potentiality of soil in Ward No. 9 of Sylhet …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 3, 2023 · pp. 13–28 Read article
-
Study on a Supercritical Airfoil with Variation in Thickness for Improved Aerodynamic Characteristics in Transonic Regime
Abstract: In this research the steady state analysis of a supercritical airfoil is done to understand the flow physics at transonic Mach number regime for various thickness. The modeling of NASA SC (2) 0714 supercritical airfoil with various thickness values is done. The steady state analysis is carried out for different test cases in combination with different thickness, angle of attack and Mach number at 10 km altitude using density-based Reynolds …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 122–134 Read article
-
Dynamic Behavior of Asphalt Stabilized and Grid Reinforced Subgrade Soil
Abstract: The impact of repeated loading (punching shear) on Asphalt stabilized and grid reinforced subgrade soil have been investigated in this study. Specimens of 152mm diameter and 116 mm in height have been prepared, cured, and then tested using the pneumatic repeated load system PRLS. The deformation-load repetitions data were recorded for each case. Data were fed to the finite element software for the modeling process. An assessment was conducted to …
Published in Trends in Transport Engineering and Applications · Vol. 5, Issue 2, 2018 · pp. 1–9 Read article
-
Characteristics of Geology in Khulna City Corporation (KCC) Area, Bangladesh
Abstract: This study represents the general characteristics of foundation soil in Khulna City Corporation (KCC) area. The KCC is situated in southwestern part in Bangladesh. Lithologically the area is composed of coarse to very fine silty sand, silt, silty clay, clayey silt and clay in various proportion. The SPT (Standard Penetration Test) value of the investigated area range between 0 and 7 from surface to 8 m deep. Here, the liquid …
Published in Journal of Geotechnical Engineering · Vol. 1, Issue 1, 2014 · pp. 39–45 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Development of a predictive model for determining mechanical properties of nano Al2O3 reinforced adhesive bonded SS304 single lap joint
Abstract: In this study, single lap joints were prepared by adding nano-additives (Al2O3) in the quantity of 3 wt % in the phenolic resin, and the overlap length was varied to observe the effect on joint engineering properties. In the experiments, a single component system of a specific grade of phenolic resin was used as a binder, and aluminum (AA8011), as well as stainless steel (SS304), was used as adherends. The …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 20–28 Read article
-
New Design Formulae for Safety and Precision in the Fatigue Engineering of Mechanical Components and Structures
Abstract: This paper introduces two new formulae, termed the Nori Fatigue Formulae, for determining the maximum allowable fatigue stress in mechanical components and structures with significant stress concentrations. These formulae will eliminate the usage of code-sensitive safety factors along with other factored values from the entire mechanical design engineering work, ranging from a safety pin to spacecraft. The first formula gives the maximum allowable fatigue stress in tension, and the second …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 6–22 Read article