Search
67 articles for “Microstructural Characterisation”
-
Fabrication and Analysis of Al 7075 Based Metal Matrix Composites - A Review
Abstract: Aluminium 7075 alloys are extensively used in aerospace, marine, aviation, and automotive industries due to their superior mechanical properties, high strength-to-weight ratio, and low density. However, to further enhance their performance, aluminium-7075 metal matrix composites (AMMCs) are developed by incorporating various reinforcements. This paper focuses on the influence of reinforcements on the mechanical, tribological, and corrosion behavior of AMMCs. The study examines fabrication techniques, particularly the stir casting method, which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–12 Read article
-
A Review on The Role of Nanoparticles in Modifying Mg Alloys and Composites
Abstract: Reviewing and assessing magnesium's uses in the automobile sector, which have the potential to greatly improve fuel efficiency and environmental preservation, is the goal of this study. The report provides an overview of magnesium alloys' present benefits, drawbacks, technological obstacles, and future prospects in the automobile sector. The development of magnesium matrix composites has advanced to a new level thanks to the magnesium matrix nanocomposites' exceptional mechanical qualities. Dispersing nanoparticles …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 24–32 Read article
-
A Comprehensive Analysis of Coating Technology and Thin Films
Abstract: In contemporary materials science, thin film and coating technologies are essential because they allow for the improvement of surface characteristics, including electrical conductivity, hardness, corrosion resistance, and optical performance. These technologies use physical, chemical, or hybrid deposition techniques to deposit materials in layers that range in thickness from a few nanometres to several micrometres, depending on the required functional properties and application areas. The content, thickness, and microstructure of films …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 50–64 Read article
-
Investigation of Mechanical Properties of Hollow Bricks Incorporating Aerated Aggregates: A Polymer-Cement Composite Approach
Abstract: The rapid advancement of construction technologies has necessitated the development of lightweight, thermally efficient, and sustainable building materials. Hollow bricks, due to their inherent voids, offer substantial reductions in dead load and enhanced insulation properties. However, their mechanical performance often falls short when compared to conventional solid bricks. To address this limitation, this study explores the synergistic integration of aerated aggregates and polymer-cement composites (PCCs) in hollow brick production. Aerated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 92–105 Read article
-
Recent Progress in Magnesium Hybrid Metal Matrix Composites: Processing, Properties, and Applications
Abstract: Magnesium hybrid composites have emerged as promising materials to meet the growing demands of advanced sectors such as biomedical, aerospace, defense, automotive, electronics, and marine industries. However, the inherent drawbacks of magnesium, specifically low wear resistance, have encouraged scientists to develop magnesium-based MMC with improved mechanical properties and thermal properties. To achieve this, various mixtures of reinforcement are employed. These include ceramics with high strength and wear resistance; solid lubricants …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1287–1301 Read article
-
Comparative Study of Compressive and Flexural Strength of Concrete by Partial Replacement of Cement by Nano Silica Powder in M40 Grade Concrete
Abstract: Concrete, a fundamental building material, traditionally relies on cement as a primary binder. However, the environmental and economic challenges associated with cement production have driven the search for alternative materials that can partially replace cement while maintaining or enhancing concrete's performance. This study focuses on the effects of Nano Silica Powder as a partial substitute for cement in M40 grade concrete, an advanced solution aimed at reducing the carbon footprint …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 18–25 Read article
-
Comparative Analysis of Processing-Property Relationships in Metal and Polymer Matrix Composites: A Unified Statistical Framework for Hardness Characterization
Abstract: Composite materials, encompassing both metal matrix composites (MMCs) and polymer matrix composites (PMCs), exhibit complex processing-property relationships that fundamentally govern their mechanical performance across diverse applications. This study presents a unified statistical framework for analyzing hardness characteristics in composite systems, using aluminum-tungsten carbide (Al-WC) metal matrix composites as a representative model system while establishing connections to polymer matrix composite behavior. The investigation employed comprehensive processing parameter optimization, microstructural characterization, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 419–430 Read article
-
Stone Waste as a Soil Stabilizer
Abstract: The rapid expansion of construction, mining, and stone-processing industries has led to the large-scale generation of stone waste materials such as marble powder, granite slurry, quarry fines, and sandstone residues. The indiscriminate disposal of these wastes poses serious environmental concerns, including land degradation, dust pollution, and contamination of surface and groundwater resources. At the same time, weak and problematic soils continue to present major challenges in geotechnical engineering applications, particularly …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 1, 2026 · pp. 71–77 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Valorization of Human and Cattle Dental Waste into Functional Composite Biomaterials: A Detailed Comparative Analysis
Abstract: This study investigates the conversion of human and cattle (goat and cow) teeth into bioactive hydroxyapatite-based composites and presents a detailed comparative evaluation of these biogenic materials with laboratory-synthesised (synthetic) hydroxyapatite (HAp). In this work, hydroxyapatite was extracted from human and bovine teeth through controlled calcination and milling, while synthetic HAp was prepared using a standard wet chemical precipitation route. All materials were subsequently sintered at 900 °C and fabricated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 340–354 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
Functionally Graded Natural Fibre and SiC-reinforced Polymer Composite: Mechanical Properties
Abstract: Multifunctional materials, also called functionally graded materials (FGMs), are based on natural fibres or fillers and vary in composition and/or microstructure to control functional, structural, or thermal, properties. Functionally graded materials (FGMs) have been created for use in spacecraft, aircraft, and other engineering applications because they can withstand extremely high temperatures. Particle-reinforced FGMs, which make up the majority of FGMs, are made differently depending on their position. The mechanical and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 1–14 Read article
-
Experimental Analysis of Mechanical Characteristics of Aluminium Matrix Hybrid Composite Using Seashell Powder And Coconut Shell Powder
Abstract: The purpose of this study is to investigate the manufacturing processes and mechanical properties of composites made of marine shell powder, coconut shell powder, and aluminium. In our project, the MMC was made of aluminium with seashell powder and aluminium with coconut shell powder. A stir casting process fabricated the Composite. The composition of aluminium, seashell powder and coconut shell powder varies. According to the criteria established by the American …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 487–494 Read article
-
Biopolymer–Cement Hybrid Panels from Recycled Paper Mill Reject: Experimental Characterisation and Machine Learning Optimization
Abstract: The increased rate of the accumulation of industrial residues in the developing countries is a major cause of concern for the environment. The current study brings forth the use of industrial residues in the form of the production of eco-friendly building materials as a sustainable approach to their valorization. The valorization of recycled paper mill reject, a cellulose-based biopolymeric industrial residue, is being addressed in this study as a reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 67–90 Read article
-
Experimental Investigation of Boron Carbide Reinforced Al-Mg-Si Alloy Nano Composites by the Stir Casting Method Using Machine Learning Algorithm
Abstract: For the purpose of this experiment, Al-Mg-Si alloys were manufactured with the use of the stir casting process with a metal mold. The alloys had different weight percentages of nano boron carbide, which ranged from 0 to 4% by weight. The intervals between the percentages were 0.5. Following that, the microstructural and mechanical parameters of the as-cast alloy and the nano composites were compared and contrasted according to ASTM Standards …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1766–1779 Read article
-
Effects of Nano B4C Addition on the Solidification Behavior of Al-2219 Alloy Composites
Abstract: The inclusion of nano B4C particulates in Al-2219-Nano B4C alloy was investigated to understand their impact on hardness and wear characteristics. 500 nm-sized nano B4C particulates are used as reinforcements for structures in the Al2219 alloy matrix. The nanocomposites were fabricated using the two-stage liquid stir melt method with varying weight percentages (2, 4, 6, and 8 wt. %) of Nano B4C in the Al-2219 alloy matrix. Renewable energy dispersive …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 31–38 Read article
-
A Comprehensive Review of Concrete Containing Magnetically Treated Water
Abstract: In Present scenario, Construction has benefited greatly from the characteristics of concrete and the magnetism of water. The procedure of permitting water to pass through the magnetic field is part of creating magnetised water, utilizing those properties of concrete that can affect such as compressive strength, workability, porosity, permeability, durability, water absorption capacity, hydration rate and aqueous ratio. Reduced cement usage and improved mechanical and technical qualities of concrete are …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 52–64 Read article
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article