Search
471 articles for “Micro-Electronics.”
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Zn Doped CuO Nanoparticles for Increasing the Longevity of The Agricultural Products †
Abstract: Nanotechnology is an enabling technology at the service of mankind. Indeed, enhancing the long-term storage of agricultural products (post-harvest during transportation and storage) in general and apples and tomatoes, in particular, is a challenge. Zn-doped CuO is a proven nanomaterial with special ability to kill plant pathogens as well as a variety of microorganisms (bacteria, virus, and fungus). Much of the review is focused on the landmark papers published by …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 1, 2024 · pp. 14–29 Read article
-
Dissimilar Joining Of Aluminium Alloy to Copper Using Tungsten Inert Gas Welding Process
Abstract: Aluminium-copper dissimilar joints are applicable to electrical industry. 2 mm thick aluminium alloys (A1100) sheet is joined to 1 mm thick copper (Cu-DHP) sheet using tungsten inert gas welding (TIG) process. The effect of process parameters like heat input, torch orientation, arc weaving on mechanical properties of the joint are studied. In this combination the molten pool generated by melting of aluminium edge will wet the coppersurface to form a …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 2, 2018 · pp. 15–20 Read article
-
Processing and Characterization of Ni2MnSn FSMA
Abstract: Among Ferromagnetic Shape Memory alloys (FSMAs), Ni2MnSn Heusler alloys owing to occurrence of large magnetic field induced strain (> 10%) along with other interesting properties like premartensitic transition, high transformation temperature, large magnetocaloric effect and low stress of twin variant rearrangement. The prominent challenges facing the design and utilization of these specialized alloys are a limited range of operating temperatures, phase transformations that have high sensitivity to variations in composition, …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 154–159 Read article
-
Properties and antimicrobial activity of bacterial nanocellulose composite incorporated with silver nanoparticles based on green synthesis
Abstract: Green silver nanoparticles (AgNPs) synthesized using medical plant extracts as capping and reducing agents demonstrate broad applicability in addressing the threat posed by infections. In this study, we present a sustainable, low-toxicity, and cost-effective bacterial nanocellulose composite with silver nanoparticles based on green synthesis that uses Origanum vulgare as a reducing agent due to numerous biological components. The formation of AgNPs in composite and morphological properties was analyzed using scanning …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 323–328 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Comprehensive Review of Nanomaterials Synthesis Methods, Characterization and Multifaceted Applications in Medical Field
Abstract: Nanomaterials associated by special qualities derived from their nanoscale size nanomaterials have tremendous potential in a variety of industries like, medicine & healthcare. Due to today busy life & unhealthy life schedule many abnormal cell growth take place in our body & affect the other organ. Sometimes it may leads to cancer & others dangerous diseases, nanomaterials such as nanotubes, liposomes & polymeric micelles are help for designing the drugs …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 657–669 Read article
-
An Assessment of Interfacial Chemistry and Character of Fiber/Polymer Microcomposites
Abstract: AbstractThe interfacial chemistry and character of hygrothermally treated E-glass/epoxy microcomposite have been investigated by Fourier transform infrared spectroscope (FTIR-imaging), temperature-modulated differential scanning calorimeter (TMDSC) and scanning electron microscope (SEM) techniques. The physico-chemical interactions occurring between absorbed water molecules and the network of a tetrafunctional epoxy resin were studied by FTIR-imaging. This is used to study the mechanistic details of epoxy curing on the molecular level. Absorbance peaks of OH stretching …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 1–5 Read article
-
Dye Sensitized Solar Cells Based on Extracted Natural Dyes and Synthetic Dyes with Nanocomposite Material
Abstract: Producing dye sensitised solar cells in their original colours required a number of different techniques. Plants and berries were used to extract these dyes. The DSSCs were manufactured by recycling the old dyes. It was clear that the efficiency of the power conversion was deteriorating. TiO2 mesoporous films' potential applications were also studied. This study employed electrochemical impedance spectroscopy to examine the interactions of natural dyes with TiO2. Bi2O3 nanoparticles …
Published in Journal of Polymer & Composites Read article
-
Taguchi Analysis of the Thrust Force and Delamination in Drilling of Glass Fiber Reinforced Epoxy/Clay Nanocomposites
Abstract: AbstractComposites are replacing several materials due to their superior properties such as high strength to weight ratio, high stiffness to weight ratio, better impact characteristics, corrosion resistance and design flexibility. Drilling is often required to facilitate the assembly of the parts to get the final product. However, drilling induced damage affects the quality of the drilled components. The present investigation is an attempt to study the effect of the cutting …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 14–23 Read article
-
Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl Ester Composites
Abstract: AbstractIn this paper, mechanical and tribological behavior of the composites under dry sliding wear of vinyl ester matrix reinforced with chopped strand mat (CSM)-E-glass fiber and fillers CaSO4 and CaCO3 sliding against smooth stainless steel counterface (Ra = 0.07 µm) using Taguchi experimental design has been presented. The effects of sliding velocity (1.57, 2.62 and 3.67 m/s), normal load (20, 40 and 60 N), filler content (0, 10 and 20 …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 13–31 Read article
-
Investigation of Inter Delamination Properties and Morphological Analysis of Natural Fiber-Reinforced Polymer Matrix Composites
Abstract: AbstractNatural fibers are strong, light weight, renewable, cheap, completely or partially recyclable, and biodegradable. The various types of natural fibers are flax, cotton, jute, sisal, kenaf pineapple, bamboo, banana, wood, etc. In this work, sisal fibers and banana fibers have been employed as the main reinforcing materials with epoxy resin as the matrix in order to increase the effectiveness of natural fiber-reinforced polymer matrix composites. In this study, it is …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 1–7 Read article
-
Comparative Adsorption Studies on Raw Rice Husk, Acid Leached Rice Husk and Base Leached Rice Husk by Using Methylene Blue as Dye
Abstract: Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use of raw rice husk (RRH), acid-leached rice husk (ALRH) and base-leached rice husk (BLRH) as adsorbents for decolorization. Characterization of raw rice was done by powder X-ray diffraction (P-XRD) analysis, surface area analysis and scanning electron microscopy. Raw rice husk was collected directly from …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 1, 2015 · pp. 32–39 Read article
-
Multifarious Magnitude of Magnesium Oxide Nanoparticles Integrated Feed on Growth and Hematological Characteristics of Mrigal Cirrhinus mrigala
Abstract: The present study deals with the multifarious magnitude of magnesium oxide nanoparticles integrated feed on growth and hematological characteristics of Mrigal Cirrhinus mrigala. Magnesium oxide nanoparticles were made using the co-precipitation process and analyzed, identified, and characterized utilizing scanning electron microscopy, energy dispersive x-ray spectroscopy, x-ray diffraction, and Fourier transform infrared spectroscopy. Four feeds such as Feed I (Control), II, III, and IV were prepared by using multifarious magnitude (25, …
Published in Research and Reviews: A Journal of Toxicology · Vol. 13, Issue 1, 2023 · pp. 1–9 Read article
-
Crystal Defects and Their Characterization in Modern Materials Science
Abstract: The physical and chemical properties of crystalline solids are fundamentally dictated by deviations from structural perfection, known as crystal defects. From the point-scale vacancies that drive diffusion to the planar boundaries that determine mechanical strength, defects serve as the primary "tuning knobs" in material design. This review provides a comprehensive examination of point, line, and planar defects, exploring their formation energetics and their role in plastic deformation via crystallographic slip. …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 1, 2026 · pp. 15–19 Read article
-
A Brief Review on Interfaces of Copper Welded to Different Materials
Abstract: In engineering applications, three metals with high conductivity are primarily used such as copper (Cu), aluminium (Al), and silver (Ag). Each has its unique set of properties that affect specific engineering applications. Infact the choice of conductor depends on a mixture of cost, technical parameters, and environmental conditions. Among these, Copper is widely valued in engineering applications due to its antimicrobial property, excellent electrical (about 100% IACS) and thermal conductivity, …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 23–36 Read article
-
Polymer-Mediated Electron Transfer in Eco-Friendly P3HT–rGO Nanocomposites for Optoelectronic Applications
Abstract: Conducting polymer–graphene hybrid nanocomposites have emerged as promising materials for next-generation optoelectronic applications owing to their solution processability, tunable interfacial properties, and mechanical flexibility. Recent studies have highlighted the importance of graphene–polymer hybrid systems in enhancing charge transport pathways, exciton dissociation efficiency, and interfacial stability in organic optoelectronic devices. Despite these advantages, a key challenge remains the efficient production of individual graphene sheets through the reduction of graphene oxide using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 413–423 Read article
-
Amorphous composite coating’s ability to resist corrosion
Abstract: To increase the mechanical qualities of the coatings, amorphous composite coating was applied to the carbon steel substrate using arc spraying and remelted using a plasma remelting technology. Micro structural microscope, scanning electron microscope, energy dispersive spectroscopy, X-ray diffraction, and microhardness tester were used to examine the composition, microstructure, and characteristics of the composite coating. After the plasma remelting, the microstructure of the composite coatings for amorphous materials was more …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 2, 2022 · pp. 12–16 Read article
-
A Hybrid model of ResNet50 integrated U-Net for image Denoising for Polymer and Composite Microstructure Analysis
Abstract: In digital era a high-quality imaging plays a very important role in polymer and composite material characterization features such as fiber-matrix interfaces, voids, microcracks cause problems in mechanical and functional properties. Polymer imaging includes optical microscopy and scanning electron microscopy, due to sensor limitation, environmental conditions add noise to the image and reduce quality of image. The noise degrades image quality, and it leads to reduce reliability in material analysis. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 592–602 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article