Search
285 articles for “Hydro processing”
-
A non-hydrotreated feedstock’s polyaromatic cracking under FCC industrial operating conditions using an equilibrium catalyst
Abstract: Catalytic cracking of non-hydrotreated atmospheric residue’s main polyaromatic hydrocarbon (PAHs) in the presence of an equilibrium catalyst was investigated under industrial operating conditions. During the fluid catalytic cracking process, the catalyst that presented the key factor in hydrocarbon cracking (aromatic by hydrogen transfer reaction) quickly deactivated and compromised the process’s performance due to its acid surfaces and pores covered by the polyaromatic species. A deep study of the catalyst behavior …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 1, 2025 · pp. 10–26 Read article
-
Plasma Gasification for Sustainable Waste Management: Challenges and Future Prospects
Abstract: Plasma gasification technology offers a promising solution for the sustainable disposal of municipal solid waste (MSW) by converting waste into energy or valuable products, aligning with the principles of the circular economy. Despite its potential, plasma gasification faces challenges in terms of high operational costs, energy demands, and limited commercialization success. This article critically evaluates plasma gasification alongside traditional MSW processing methods, including biological, hydrothermal, and thermochemical techniques, comparing their …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 01–05 Read article
-
Formation of Anolyte and Catholyte Types of Water during electrolysis and their Effect on Living Organisms
Abstract: During electrolysis, an anolyte (dead water) and catholyte (living water) solutions are formed. Anolyte promotes metabolic processes, and is also mild antiseptic. The disinfecting effect of the anolyte is equivalent to treatment with iodine, brilliant green, hydrogen peroxide, without causing chemical burns of living tissues and not staining them. The living water, being a catholyte, has enhanced bio stimulating properties. It has a beneficial effect on the human organism, enhancing …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 3, 2021 · pp. 34–40 Read article
-
A Comparative Study of Neem Oil and Mahogany Oil as Corrosion Inhibitors for Mild Steel Exposed to Hydrochloric Acid
Abstract: Corrosion is essentially an oxidation process, wherein the oxidizing agent itself undergoes reduction due to the influence of corrosion agents like salt, air, or moisture. Metals and their alloys naturally tend to react spontaneously with their surroundings, leading to a detrimental impact on their mechanical and physical properties. This project aimed to evaluate the effectiveness of two different oils, namely neem oil and mahogany oil, as agents to prevent acid …
Published in Recent Trends in Fluid Mechanics · Vol. 10, Issue 2, 2023 · pp. 13–18 Read article
-
Future Challenges of Photocatalytic Water Splitting: Sustainability
Abstract: Photocatalytic water splitting has emerged as a promising technology for sustainable hydrogen production through the direct utilization of solar energy. This process mimics natural photosynthesis, using semiconductor materials to absorb light and drive the decomposition of water into hydrogen and oxygen. The method provides a sustainable and eco-friendly solution to the global energy challenge by enabling the reduction of carbon emissions. Among various solar-to-chemical energy conversion approaches, photocatalytic water splitting …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 3, Issue 2, 2025 · pp. 43–48 Read article
-
Generating Fuel Energy by Catalytic Pyrolyzing of Microalgae
Abstract: In biomass pyrolysis process, a catalyst is used to modify the pyrolysis gases' chemical composition and increase the bio-oil fraction. This process uses the byproducts of thermal conversion processes. It is anticipated that the introduction of pyrolysis catalysts in the case of microalgae will lower the bio-oxygen oil's content and increase the number of added-value compounds in this liquid fraction. Catalysts can also help decrease the nitrogen in bio-oil. As …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 2, 2022 · pp. 31–35 Read article
-
Land surface dynamics: A Multiphysics Approach to Modeling Mass Transport
Abstract: Land surface dynamics are governed by complex interactions among hydrological, atmospheric, and geomorphological processes that collectively drive the transport of mass across terrestrial environments. Traditional modeling approaches often isolate individual mechanisms, limiting their ability to capture the coupled feedbacks that shape landscape evolution. This study presents a multiphysics framework for modeling mass transport on land surfaces, integrating fluid flow, sediment transport, heat exchange, and chemical reactions within a unified computational …
Published in International Journal of Land · Vol. 2, Issue 2, 2025 · pp. 31–36 Read article
-
Chemical Methods for Mitigating Plastic Pollution from the Environment
Abstract: Plastic pollution is a critical environmental concern that affects both terrestrial and marine ecosystems worldwide. Traditional recycling methods have been inadequate in tackling the escalating plastic waste problem, leading to an exploration of chemical recycling techniques as innovative solutions. Chemical recycling involves breaking down polymers into their monomers or converting them into valuable products, offering the potential for more sustainable waste management. This review examines key chemical recycling methods, including …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 2, 2024 · pp. 1–4 Read article
-
Production of Glucose from Corn cobs using dilute sulfuric acid
Abstract: AbstractCorn cob, a waste residue of corn can be used as substrates for the production of reducing sugar (glucose). This research is aimed to study of the effect of acid concentration, time and temperature for a high yield of reducing sugar from Corn cob. A three-variable, three-level Box-Behnken design was used to develop a statistical model for the optimization of the process variables. The optimal hydrolysis situations that resulted in …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 1, 2019 · pp. 21–27 Read article
-
Molasses to Ethanol Conversion Processes Overview: Process Simulation of the Beer-Ethanol Distillation
Abstract: The main target of this research is to give an overview of ethanol production and also to investigate the distillation process in a comparative way between the simulation and the lab tests. Different samples at different stages have been measured from the fermentation section to evaluate the ethanol production rate and concentration in each one of the fermenter as well as the PH measurements have been considered over six periods …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 1–16 Read article
-
AI-Assisted Kinetic Modeling of PLA Hydrolysis Under Subcritical Water Conditions for Sustainable Polymer Recycling
Abstract: The accumulation of poly (lactic acid) (PLA) in terrestrial and marine ecosystems has intensified the demand for closed-loop, green recycling technologies. Subcritical water (SCW) hydrolysis offers a promising, catalyst-free pathway for the rapid depolymerization of PLA into its constituent monomer, lactic acid. However, the complex, highly non-linear kinetics governing macro-molecular degradation under variable hydrothermal conditions limit real-time process optimization and industrial scalability. This study develops a novel artificial intelligence (AI)-assisted …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 2, 2026 · pp. 65–74 Read article
-
Recovery of Liquid Hydrocarbon Fuels from Polypropylene Waste Plastics via Catalytic Pyrolysis
Abstract: Process of pyrolysis is a thermo-chemical method conducted at high temperatures and usually in presence of catalysts. Dissimilar type of natural and synthetic catalysts are used for alteration of organic wastes into cherished fuels. The aim of this work is conversion of waste production of liquid fuel using catalyst that produced from rice husk ash. Waste plastic was pyrolyzed at temperature range 430-470oC and obtained products were liquid fuel, gas …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 1, 2020 · pp. 33–48 Read article
-
Experimental and Simulation Study on Reduction Kinetics of Magnetite Ore by using Hydrogen
Abstract: In the present work, magnetite ore fines pellets were prepared for a study of reduction kinetics using hydrogen gas. In the present work, various parameters are investigated to assess their influence on reduction kinetics with respect to hydrogen utilisation. The different input variables influence the process, yielding the reduction fraction. The effect of temperature on reduction kinetics with hydrogen flow rate was explored for the optimum value of these parameters. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 71–81 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Polymer Chemistry in Nutraceutical Composites: Exploring Natural Polymers and Binding Systems in a Bamboo-Enhanced Formulation
Abstract: Polymer chemistry underpins the development of advanced nutraceutical composites, blending natural polymers with functional ingredients for health benefits. This study examines a novel nutraceutical formulation comprising ragi (16.39 g/100g), wheat (12.29 g/100g), soybean (12.29 g/100g), buffalo milk (16.39 g/100g), buffalo butter (4.13 g/100g), bamboo extract (0.90 g/100g), and auxiliary components (37.61 g/100g, including fats, sugars, and proteins). Natural polymers—proteins from soybean and milk, polysaccharides from ragi and wheat—form a macromolecular …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 878–884 Read article
-
Advancements in Zeolite Catalysis for Efficient Oil Refining and Sustainable Energy Production
Abstract: Fossil fuels remain the primary reliable and cost-effective energy source for maintaining the desired product quality. This dominance stems from advancements in petrochemistry and oil refining, driven by substantial investments in research and innovation. The exceptional efficiency of oil refining is largely attributed to the use of zeolites as catalysts, a breakthrough regarded as one of the most significant achievements in modern chemistry. Their applications span across several catalytic processes, …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 2, 2025 · pp. 35–42 Read article
-
Advancements In Hydrogenated Diamond-Like Carbon Thin Film Deposition & Surface Modification
Abstract: Materials synthesis and processing are pivotal in advancing technologies across domains such as electronics and biomedical applications. This review provides a detailed exploration of recent advancements in thin film deposition techniques, focusing on hydrogenated diamond-like carbon (HDLC) films and various surface modification methodologies. Beginning with an overview of HDLC films, the paper highlights their unique properties and wide-ranging applications, emphasizing their importance in modern materials science. Key sections of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 761–777 Read article
-
Valorization of Shrimp Processing Waste by Green Methodology and its Application in Chitosan-PEG Composite Film
Abstract: Shrimp processing waste is mostly unidentified marine by product, presents considerable environmental pollution which also offers a rich but not fully exploited sources of biopolymers. The current work presents a sustainable method to convert shrimp processing waste into chitosan a biopolymer by green methodology. Isolation of chitin to chitosan from shrimp processing waste was carried through four green methodology steps i. Demineralization using citric acid ii. Deproteinization using papain iii. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1154–1162 Read article
-
Study on Effect of Insulation Design on Thermal-Hydraulic Analysis: An Important Aspect in Subsea Pipeline Designing
Abstract: The most imperative and challenging operational hazards for oil and gas pipelines are the risks associated with the transportation of fluids. When water, oil and gas flow simultaneously inside the pipeline, there are quite high chances that, water and hydrocarbon fluids can form and deposit hydrate such as wax and asphaltene on the inner surfaces of the pipeline and gradually blocking it. In this paper we explore and compare the …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 33–44 Read article
-
Comparative Analysis of Dip and Spray Techniques with Ethanol, Polyvinyl Alcohol, and Acetone Hydrophobic Glass Slides with Al2O3 Coating
Abstract: The hydrophobic effects of Al₂O₃ coatings on glass slides are investigated in this work by comparing dip and spray procedures using three distinct solvents: acetone, polyvinyl alcohol (PVA), and ethanol. Using both dip and spray techniques, the experimental design systematically applies Al₂O₃ coatings on glass slides. Then, the effect of the chosen solvents on hydrophobicity is investigated. Delineating the complex interaction between coating processes and solvent options requires careful analysis …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 45–51 Read article