Search
94 articles for “Extraction temperature”
-
Optimized Machine Learning Framework for Battery State Prediction in Smart Charging Systems
Abstract: Good estimation of battery states, including State-of-Charge (SoC), State-of-Health (SoH), and Remaining Useful Life (RUL), are important in managing energy wisely and controlling the adaptive charging. This work introduces a streamlined machine learning model based on the ability to use multi-dimensional sensor measurements in terms of voltage, current, temperature, and cycle number to forecast battery conditions with high accuracy. Decent preprocessing, such as noise elimination, feature scaling, and calculated features, …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 55–66 Read article
-
Metal Oxide Based Thin Film Transistors for Transparent and Flexible Electronics: Critical Review
Abstract: AbstractTransparent and flexible electronics is new emerging research area. Various technologies are available for thin film transistors (TFT). Metal oxide semiconductors are suitable because of their high optical transparency, good electrical performance etc. These devices have advantages of a-Si and organic materials also. Advantages of these devices are low cost, low process complexity and temperature, and large-area scalability and large carrier mobility. In this paper research work is compared. This …
Published in Journal of Electronic Design Technology · Vol. 9, Issue 1, 2018 · pp. 30–40 Read article
-
Design and Construction of a Thermosiphonic Solar Photovoltaic – Thermal Water Heating System for Sustainable Development in Temperate Regions of Africa
Abstract: AbstractThe atmospheric temperature of some temperate regions of Africa is mostly about 30–45°C, it incites 30–80°C heat over the panel since black body of the PV panel observes more heat, and this temperature affects the electrical efficiency of the panel. The importance of energy availability in the economic growth, social and political development for every nation cannot be overemphasized. Affordable and reliable energy availability is the precondition for sustainable development. …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 3, 2017 · pp. 1–8 Read article
-
AI Powered Fault Detection in DC Motor using STM32
Abstract: This work presents the design and implementation of an embedded artificial intelligence system for real-time fault detection in a direct current (DC) motor using the STM32 Nucleo- F411RE microcontroller. The objective of the study is to develop a low-cost and efficient predictive maintenance solution capable of identifying abnormal motor behavior at an early stage. Vibration and temperature signals are acquired using an MPU6050 sensor and processed directly on the microcontroller …
Published in Journal of Control & Instrumentation · Vol. 17, Issue 1, 2026 · pp. 39–49 Read article
-
Eco-Friendly Elixirs: A Critical Review of Biosurfactants for Sustainable Wastewater Solutions
Abstract: Biosurfactants are the amphiphilic substances which are acquired from the remains of the living microorganisms and have attracted a lot of scientific interests because of their applicability in various fields. This review aims at reviewing current research and development on biosurfactants with special emphasis on their application in wastewater and oil. Biosurfactants being less hazardous to the environment are produced by microorganisms and works as a substitute for chemically produced …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 2, 2024 · pp. 14–33 Read article
-
Harnessing Marine Byproducts and Optimization of Biopolymer Extraction Quality Using Response Surface Methodology and Study of Its Physicochemical Properties
Abstract: Chitosan, a versatile biopolymer derived from chitin, holds immense potential across various industries owing to its antimicrobial, antioxidant, and biocompatible properties. This study aims to optimize the deacetylation process of chitin, sourced from shrimp shells, using Response Surface Methodology (RSM) to produce high-quality chitosan. The Box-Behnken Design (BBD) was employed to evaluate the effects of temperature, time, and alkali concentration on the degree of deacetylation (DD%), a key determinant of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 125–139 Read article
-
Preserving Papaya Pulp with Potassium Metabisulfite: A Study on Prolonging Shelf Life
Abstract: Papaya is a highly perishable fruit with a shelf life of only 3 to 6 days under tropical conditions, leading to significant postharvest losses. This study aimed to preserve papaya pulp for subsequent use in product development .Pulp was extracted from “Indian Red Lady Variety” of papaya and treated with potassium metabisulphite (KMS) at concentrations of 500, 1000 and 1500 ppm. The treated pulp was stored at room and refrigerated …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 13, Issue 2, 2024 · pp. 06–14 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Computer Aided Circuit Design for Diagnosis of Dust Impact on Solar Panels
Abstract: AbstractSolar panels have come up as a promising methodology for extracting solar energy and yielding electricity. However, there exist many barriers in its path to become an indispensable part of today's era. The decreasing panel efficiency due to several factors such as temperature, irradiance, photoactive material, dust, panel orientation, is an issue of concern. Amongst these, dust is the least acknowledged, yet the most crucial parameter responsible for deteriorating panel …
Published in Journal of Electronic Design Technology · Vol. 9, Issue 3, 2018 · pp. 11–16 Read article
-
Application-Driven Rule-Based Framework for Lubrication Failure Modes in Industrial Systems
Abstract: Modern lubricants increasingly rely on polymer-based composites, integrating synthetic base oils, polymer thickeners and solid additives like MoS₂ and PTFE for high-performance applications. These formulations not only enhance thermal and mechanical stability but also enable low-friction operation across diverse industrial conditions. Lubrication-related failures represent a critical cause of unplanned downtime and reduced reliability in industrial machinery. This paper presents an application-driven, rule-based framework designed to assess and mitigate lubrication failure …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 522–531 Read article
-
Thermal and Thermoelectric Generation Using Geothermal Energy Extraction Through Cogeneration System
Abstract: The manuscript has focused on the evaluation of the improvement of energy efficiency in using geothermal energy for heat and electricity generation through additional thermoelectric production to conventional heat transfer processes. The proposed system uses Peltier rings made up of a serial and parallel Peltier cells grouping, as part of the upward and downward ducts that connect the geothermal heat exchanger and the surface heating system. The new system can …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 11, Issue 1, 2020 · pp. 58–71 Read article
-
Multi-Parameter Biomedical Sensor-Based Mental State Classification Using EEG And Deep Learning Techniques
Abstract: With mental health concerns becoming increasingly widespread, there is a strong need for systems that can monitor conditions like stress, anxiety, and fatigue in a continuous and non- invasive manner. This research proposes a novel multi-parameter biomedical sensing framework for mental state classification by integrating electroencephalography (EEG) signals with physiological parameters, including body temperature acquired using LM35 sensors, heart rate from pulse sensors, and blood oxygen saturation (SpO₂) measurements. The …
Published in Current Trends in Signal Processing · Vol. 16, Issue 2, 2026 · pp. 1–8 Read article
-
Modeling and Simulation of Pentacene based Organic Thin Film Transistors with Organic Gate Dielectrics
Abstract: AbstractTwo structures of pentacene organic thin film transistors (OTFT) with organic dielectrics, polymethyl methacrylate (PMMA) and polyvinyl alcohol (PVA) have been numerically simulated with TCAD ATLAS tool. Output and transfer characteristics were simulated and mobility, threshold voltage, sub threshold swing (SS) and current on/off ratio that play a part in the increment of conductivity of device were extracted. The authors show that the semiconductor-insulator interface actively affects the performance of …
Published in Journal of Microelectronics and Solid State Devices · Vol. 4, Issue 3, 2017 · pp. 13–18 Read article
-
Nitrosamine Accumulation, Processing Variables, and Indigenous Plant Inhibitors in Nigerian Traditionally Processed Meats
Abstract: N-nitrosamines are classified as probable or possible human carcinogens by the International Agency for Research on Cancer. Carcinogenic N-nitrosamines — principally N-nitrosodimethylamine (NDMA) and N-nitrosodiethylamine (NDEA) — are formed in abundance during the preparation of widely consumed Nigerian traditional processed meats including suya, kilishi, and balangu. This original investigation combined a six geopolitical zone of Nigerian market survey with laboratory-controlled model system experiments, effects of processing parameters on N-Nitrosamine formation …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 61–72 Read article
-
Investigation on the Benefits of Steam Adsorption and Distribution during Cyclic Steam Injection to Improve Oil Recovery - FNE Case Study, Sudan
Abstract: One of the main types of Enhanced Oil Recovery (EOR) methods is thermal stimulation method which is an increasingly common method of extracting heavy oil. there are different forms of the technology of thermal method Cyclic steam stimulation, Steam flooding and In-situ combustion “Fire flooding” are commonly applied to oil reservoirs, which are relatively shallow very viscous oil at the reservoir temperature, the most widely used steam injection methods for …
Published in Journal of Petroleum Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 1–21 Read article
-
Design of Plant for the Production of 30,000 Tons Per Year Capacity of Dimethyl Carbonate (DMC) from Natural Gas Using Aspen HYSYS
Abstract: This study focuses on the design of a plant for the production of 30,000 tons per year of dimethyl carbonate (DMC) from natural gas. The plant design was carried out using the Aspen HYSYS Software. The data obtained from Kokori natural gas served as the primary feedstock for the plant. A kinetic model for the production of DMC was developed from existing literature, followed by the development of the mathematical …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 3, 2025 · pp. 45–60 Read article
-
Formulation and Evaluation of Unani Anti-acne Cream
Abstract: In unani system of medicine (USM) many herbal drugs have been mentioned to be useful in the treatment of various skin diseases, which are considered safe and free from major side effects. Most of the formulations for topical application are in powder form and patients feel inconvenience in using traditional dosage forms in comparison to modern dosage forms. Therefore in the present study a formula (in powder form) for acne …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 5, Issue 3, 2016 · pp. 17–22 Read article
-
Modeling of Photovoltaic Module with MATLAB/Simulink
Abstract: Abstract The generation of electrical energy from sunlight is achieved with an interface called photovoltaic (PV) module. The PV module plays a vital role for extracting electrical energy from sunlight, thus its accuracy is most important parameter for consideration while developing mathematical model of PV module. For higher accuracy the single diode model with series and parallel resistors combination is used. For simulating this device in MATLAB/Simulink we need weather …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 1, 2019 · pp. 38–45 Read article
-
Study of the Effect of Saline Solution on the Extraction of the Tamarind Seed Extracts Active Coagulant for Textile Wastewater Treatment
Abstract: The use of synthetic coagulants is not regarded as suitable due to health and economic considerations. A new coagulant obtained through polymerization of tamarind seed extract has been characterized in the removal of dangerous dye pollutants. The present study was aimed to investigate the effects of tamarind seed extract as coagulant in treatment of textile wastewater. The coagulant prepared was employed for the removal of sludge at the different doses. …
Published in Journal of Water Resource Engineering and Management · Vol. 1, Issue 3, 2014 · pp. 35–39 Read article
-
Boron Nitride Unleashed: Revolutionary Insights into Its Superhard Phases and Machining Aptitude
Abstract: Exploration from the prehistoric era has proven steel to be a hard substance. According to research, the four main crystalline forms of boron nitride are graphitic, cubic, rhombohedral, and wurtzitic. Better hard materials for industrial processes have been provided by diamond, hard ceramic, and cermet in the process of developing the front of the script, which is descriptive. Turning, cutting, drilling, boring, and grinding of hard materials have been linked …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 2, 2024 · pp. 17–24 Read article