Search
1508 articles for “surface”
-
Design and Development of a Low-Cost Quadruped Robot for Educational Robotics Applications
Abstract: The locomotion of the quadruped robots resembles that of four-legged animals and can be used on surfaces that wheeled robots cannot navigate. The paper is a design and development report on a low-cost quadruped robot that has been designed to be used in educational and experimental robotics. The robot is a lightweight and modular robotic system consisting of a combination of mechanical design, embedded control, and wireless communication. The actuation …
Published in International Journal of Manufacturing and Production Engineering · Vol. 4, Issue 1, 2026 · pp. 20–26 Read article
-
Phosphorescence of Carbon Nanodots – The Phenomena and the Applications
Abstract: Photoluminescence has emerged as a fundamental phenomenon in modern biomedical science, enabling advanced diagnostic, therapeutic, and theranostic applications through light–matter interactions at the nanoscale. The ability of photoluminescent materials to absorb electromagnetic radiation and emit light at distinct wavelengths has been widely exploited in bioimaging, biosensing, drug delivery tracking, and photodynamic therapy. Among various photoluminescent nanomaterials, carbon nanodots have attracted significant attention due to their strong emission intensity, tunable fluorescence, …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 4, Issue 1, 2026 · pp. 01–05 Read article
-
Generative Design of Bioactive Orthopedic Composites for Fracture Repair Using an Integrated Conditional GAN–Transformer Framework: A Multi-Objective Approach
Abstract: Orthopedic composite implants for fracture repair must simultaneously satisfy conflicting mechanical and biological demands: high fracture toughness, sufficient compressive stiffness, and bioactive surface chemistry enabling osteoblast adhesion and mineralization. Existing design approaches rely on trial-and-error experimentation, yielding sub-optimal trade-offs between these objectives. This paper presents an integrated conditional Generative Adversarial Network–Transformer (cGAN-T) framework for fully computational, multi-objective generative design of hydroxyapatite (HA)-reinforced polymer composite microstructures targeting Orthopedic fracture repair. A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 21–35 Read article
-
Recent Advances in Smart Polymer Composites for Plant Health Monitoring: A Strategic Integration of Sensing Mechanisms and Computational Intelligence
Abstract: Plant health assessment is crucial for agricultural production and food security, as plant diseases significantly affect crop yields and quality. This paper reviews the applications of polymers and composite materials in the evaluation of plant health, focusing on both natural and artificial polymers, carbon materials, and polymeric–nanoparticle composite materials. Various types of sensing principles, such as colorimetry, fluorimetry, surface plasmon resonance (SPR), surface enhanced Raman scattering (SERS), and interferometry, are …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1135–1144 Read article
-
IR Laser Virtual Keyword: A Review Paper
Abstract: Technology is evolving at an unprecedented pace, becoming faster, more compact, lightweight, and efficient. Continuous advancements in electronics, communication systems, and embedded technologies have led to the development of innovative devices that enhance convenience and improve user interaction with digital systems. One such innovation is the laser projection keyboard, a virtual input device that eliminates the need for a traditional physical keyboard. By projecting a full-sized keyboard onto any flat …
Published in Journal of Electronic Design Technology · Vol. 17, Issue 2, 2026 · pp. 43–48 Read article
-
Activating agents control the morphology of activated carbon materials from biomass
Abstract: The stems of the plant Calotropis gigantea (Cg) were were used as a feedstock for the activated carbon material. Carbonate (K 2 CO 3 ) and oxalate (Na 2 C 2 O 4 ) were used as chemical activating agents. The morphological features of the activated carbon materials were characterized using FEG-SEM. The morphology of the activated carbon materials is found to depend on the type of activating agent used. …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 1, 2025 · pp. 27–38 Read article
-
Evaluating the Environmental Impact of Mining: Procedures, Outcomes, and Sustainable Remediation
Abstract: Mining is necessary for economic growth and getting resources, yet also has a big impact on the environment. This article looks at the different ways that mining affects the environment, such as land degradation, deforestation, water pollution, air pollution, and loss of biodiversity. Mining on the surface and underground can cause soil erosion, damage ecosystems, and pollute groundwater and surface water with heavy metals and harmful compounds. Furthermore, the emission …
Published in International Journal of Minerals · Vol. 2, Issue 2, 2025 · pp. 12–24 Read article
-
Development of Polymersomes as Macromolecular Platforms for Nanomedicine
Abstract: The conventional method of drug delivery is plagued with instability, low targeting and low bioavailability. A solution to these shortcomings is the use of polymersomes, artificial vesicles that are produced through self-assembly of amphiphilic block copolymer, and they are suggested as universal nanoscale carriers. They have stiff, tunable membranes (thickness = 2–50 nm) due to accurate control of polymer chemistry, chain length, and hydrophilic mass fraction (f), which allows predictability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 71–89 Read article
-
Understanding the Role of Remote Sensing Techniques in Monitoring Air Quality for Effective Adherence to Environmental Impact Assessment Practices in Nigeria
Abstract: The paper reviews the Nigerian Environmental Impact Assessment (EIA) Act, outlining the established air quality thresholds and emission caps for stationary sources. The standard applies to; common pollutants like sulphur dioxide, carbon monoxide, ozone, particulate matter and nitrogen oxides; toxic metals such as arsenic, nickel, cadmium and mercury; as well as volatile organic compounds, ammonia, antimony, zinc, formaldehyde and radon.It also describes the major classifications of remote sensing applications, including …
Published in International Journal of Satellite Remote Sensing · Vol. 4, Issue 2, 2026 Read article
-
Experimental Analysis of Automotive Exhaust Heat Exchanger for Thermal Uniformity
Abstract: AbstractThe I.C. Engines are losing large amount of heat into environment directly. This waste heat can be reused for other purpose like TEG, Air conditioning etc. A heat exchanger is a device that is used to transfer thermal energy between two or more fluids, between a solid surface and a fluid, or between solid particulates and a fluid, at different temperatures and in thermal contact. In case of TEG there …
Published in Journal of Thermal Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 1–5 Read article
-
Aluminum and its Alloys to Recover from Corrosive Weather
Abstract: Corrosion is defined as deterioration of material, usually metal, because of reaction with its environment and which requires presence of an anode, a cathode, an electrolyte and an electrical circuit. Aluminum and its alloys are reactive to weather of exposure, e.g. ambient, acid and alkalis. Solid to pigments are prevented from corrosion by using inhibitors. Organic inhibitors are ever praised due to non-toxic performances. Basic processes are surface adsorption to …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 7–19 Read article
-
Automatic Tyre Inflation And Deflation System in Automobiles
Abstract: Modern cars have a lot of features and electronic systems which support the driver in dangerous driving situations. Such systems are not only developed for keeping the cars under control, but they also try to improve the subjective feeling during driving and comfort. One of such systems has the task to measure and control the pressure of the tyres: Automated Tyres Pressure System (ATPS).The system is can be placed in …
Published in Journal of Automobile Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 1–4 Read article
-
Line Follower Car
Abstract: The line follower car is a machine, or we can say a robot, which follows the visible line on the surface or floor which is simply a black line on a white surface. This kind of a car has the ability to sense the line with the help of the Infrared Ray (IR) sensors which is installed under the car. After that the data which is collected by the sensors …
Published in Journal of Automobile Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 29–33 Read article
-
Optimization of Stellite Defect in Manufacturing of Engine Valves: A Review
Abstract: Intake and exhaust valves are the important components of an engine valves which are used to control flow and replacement of fuel gases inside the cylinder. This work mainly deals with defect known as stellite defect in different sizes of engine valves; and methodology adopted to prevent valve from stellite defect. Valve base material is low alloy steel (AISI 4140) and upper surface of engine valve is generally hard faced …
Published in Journal of Automobile Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 1–4 Read article
-
Oceanic Temperature Gradient as an Alternative Energy Source
Abstract: World is facing an energy crunch. To respond to the global warming, we either need a supply that has no carbon release or we need to find means to consume less energy. As the supply of non-renewable energy resources is depleting, there is a demand for new energy technologies. Oceans cover almost 70% of the earth’s surface, making them world’s largest solar collector. This paper discusses a new technological approach …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 7, Issue 3, 2016 · pp. 1–6 Read article
-
Recent Developments in Solar Photovoltaics and Thermal Hybrid Technology
Abstract: The electrical performance of solar PV panel decreases with increase in the panel/module temperature which is cause of concern in the summer season. To decrease the effect on electrical performance due to increase in module temperature, heat is extracted from the module and used as thermal energy. Heat exchanger or heat extraction device is put on the rear surface of the PV panel and working fluid or coolant is flowed …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 6, Issue 1, 2015 · pp. 14–34 Read article
-
Hydrogen and oxygen generation by Photoelectrolysis and Special Constructed Photoelectrolyzer Powered by Light Energy for Hydrogen Electric Vehicle Charging
Abstract: Today, pure hydrogen is produced by various industrial methods, including: steam reforming of methane and natural gas; coal gasification; biotechnology; electrolysis of water, etc. The most effective method for obtaining pure hydrogen is the use of photoelectrolysis of an aqueous solution of an electrolyte, flowing in a photoelectrochemical cell. In this method, the hydrogen in the photoelectrochemical cell is produced directly from solar energy. In a photoelectrochemical cell, a silicon …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 14, Issue 1, 2024 · pp. 38–46 Read article
-
Passive Capillary Flow of Aqueous Working Liquids in the PMMA Microchannel Bends
Abstract: In this work, passive capillary flows or surface-driven capillary flows are recorded in polymethylmethacrylate (PMMA) microfluidic devices using aqueous ethanol and aqueous isopropyl alcohol (IPA) as chosen aqueous working liquids. Microchannel bends are the chosen microfluidic devices with the selected microchannel widths of 50, 120 and 200 micron. This work will be useful to fabricate the PMMA laboratory-on-a-chip systems for bioengineering applications.
Published in Journal of Catalyst & Catalysis · Vol. 5, Issue 1, 2018 · pp. 21–24 Read article
-
Synthesis of Isoamyl Acetate (Banana oil) Using Fly Ash Supported Nano Crystalline Solid Acid Catalyst
Abstract: A novel fly ash supported solid acid catalyst (HClO4/FA) has been synthesized by using F-type fly ash and HClO4 as precursor. The variation of surface and physicochemical properties of the fly ash by activation methods resulted in improved acidity and therefore, catalytic activity for acid catalyzed esterification reactions. The HClO4/FA catalyst was characterized by XRF, XRD, FT-IR, SEM and BET surface area. The catalytic performance of HClO4/FA catalyst was evaluated …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 2, 2017 · pp. 1–8 Read article
-
Preparation and Characterization of Activated Carbon from Bamboo by Chemical Activation
Abstract: In this study, an attempt was made to prepare an activated carbon (AC) from bamboo by chemical activation method. Phosphoric acid (H3PO4) was used as a chemical activation agent for the production of AC from bamboo under conditions of temperature 600 °C for 1 h. The AC is an excellent adsorbent and its applications are widely described in literatures. Prepared ACs, are characterized by standard methods XRD, SEM, FTIR, XRF. …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 1, 2016 · pp. 1–6 Read article