Search
1973 articles for “6-dihydroxy-3-methoxy- 8- methyl xanthones” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Evaluate and Compare the Effect of Water of Different Hardness Levels on the Surface Irregularity in 3 Different Heat-Polymerized Denture Base Resins
Abstract: This study aimed to evaluate and compare the effect of water with varying hardness levels on the surface irregularity of three different heat-polymerized denture base resins. The hardness of water used in dental applications has been shown to influence the properties of dental materials, including denture base resins. In this study, three commonly used heat-polymerized denture base resins were subjected to immersion in water with different hardness levels. The surface …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 130–136 Read article
-
A comprehensive study of Zn x Fe 2-x O 3 Nanoparticles for magnetic fluid hyperthermia
Abstract: Magnetic nanoparticles are the bottlenecks of nanomedicine. They are a wide area of study in nanotechnology. In this review, the role of nanotechnology in transforming ZnxFe2-xO3 nanoparticles into biomedical applications and smart healthcare systems is demystified. The synthesis and characterization of ZnxFe2-xO3 nanoparticles are scrutinized, with a focus on the advantages of hydrothermal methods and the revealing capabilities of high-resolution electron microscopy, which enable a deeper understanding of these nanoparticles' …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 2, 2024 · pp. 1–9 Read article
-
Effect of Thermal Conditioning - Mechanical Performance of Natural-Synthetic Fiber Hybrid Composites
Abstract: This study investigates the effects of thermal conditioning on the mechanical and thermal properties of banana-glass fibre hybrid composites, focusing on their tensile, flexural, impact strength, and thermal conductivity. Hybrid composites were fabricated with varying banana-to-glass fibre ratios of 70:30, 50:50, and 30:70 using a hand layup technique, followed by thermal conditioning at 60°C, 80°C, and 100°C for a specified duration. Results highlight that the 50:50 composite treated at 80°C …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 1–11 Read article
-
Comparative 3E Analysis of Semi-Cylindrical Solar Still and Double-Slope Solar Still
Abstract: Potable clean water is the prime requirement for the human being. There is an urgent requirement to shift to the non-conventional method of water desalination. Solar desalination is one of the economical methods that has no adverse effect on the environment due to environmental constraints and climate change. Experiments have been performed to find out the performance of SCSS (semi-cylindrical solar still with iron wick) and DSSS (double-slope solar still …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 2, 2024 · pp. 08–16 Read article
-
Comparative Analysis of 3D Printed Nylon and PETG Specimens for Mechanical Properties.
Abstract: Fused deposition modeling (FDM) is one of the most used additive manufacturing techniques for polymer components. The polymer materials generally used in FDM process are polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), polyethylene terephthalate glycol (PETG), Nylon, etc. The mechanical properties of parts fabricated by FDM depend on material and process parameters. Several researchers have tried to investigate the influence of process parameters on mechanical properties for some of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 7–14 Read article
-
Substitution of La3+ in Cu0.5Co0.5 LaxFe2-x O4 (x=0.02, 0.06) spinel ferrites improves the structural and dielectric Properties
Abstract: Nanosized Spinel ferrites with composition Cu0.5Co0.5 LaxFe2-x O4 (x=0.2, 0.6) synthesized by Sol-Gel auto Combustion method. The prepared sample was calcinated at 8000c for 4 hours. The substitution of La3+ effects the structural parameters, which is characterized by X-ray diffraction (XRD). The X-rd analysis shows that the crystallite size is 34.609 nm for 0.02 and 38.994 nm for 0.06 was calculated by using Debye-Scherrer’s formula. dislocation density shows at value …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 45–48 Read article
-
Corrosion Measurement and Hardness Test of Magnesium-Tri Calcium Phosphate Composite Fabricated by Stir Casting
Abstract: Magnesium MMC is preferred in applications requiring high-quality materials and has replaced monolithic materials. Bio-implants traditionally used are titanium, steel, and nickel-titanium alloys, however, their removal necessitates surgery, which is costly and painful. While biodegradable 3D-printed implants are effective and eliminate the need for a second surgery, they remain expensive. After several studies to solve this issue, the development of biodegradable implants is considered. Magnesium possesses good biodegradable properties. An …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 436–447 Read article
-
Production And Purification of Amylase Through Bacterial Strain
Abstract: Amylases are important industrial enzymes with use in detergents, brewing, and food processing because of their ability to hydrolyze starch. In this research, the production and optimization of α-amylase from a potato soil isolated bacterium using agro-waste as a carbon source is investigated. The isolate had a hydrolytic zone of 13.33 mm and the highest activity of 545 U/mL under submerged fermentation with 1% starch. Optimum conditions were pH 7.0, …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 15, Issue 2, 2025 · pp. 1–10 Read article
-
Novel Strategic Framework for AI-Driven Discovery and Development of Smart and Sustainable Polymers in Healthcare
Abstract: The development of new smart and sustainable polymers is emerging as a priority of new health care innovative development, but event before it may be actualized, the usual culprit is the delay and unproductive execution of the old-fashioned R&D efforts. The current paper proposes a strategic plan which will solve all these shortcomings and speed up the material discovery process by using Artificial Intelligence (AI) and Machine Learning (ML). The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1535–1550 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
Modeling Deformation Mechanisms of Horseshoe Tunnel Excavation In Layered Ground Using Flac 3D
Abstract: In the modern era of civilization, the transportation sector plays a pivotal role in a nation's development. Efficient transportation networks are essential for economic progress, and tunnels are particularly valuable in this regard, as they help reduce travel time and fuel consumption. With growing interest in underground infrastructure, researchers are increasingly focusing on tunnel-related studies. This paper examines the deformational behavior of a horseshoe-shaped tunnel constructed in layered soil, subjected …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 3, 2025 · pp. 46–61 Read article
-
HPV Screening as an Alternative to Pap Smear in Cervical Cancer Prevention: A Comparative Study in North India
Abstract: Cervical cancer remains a leading cause of cancer-related morbidity and mortality among Indian women, especially in low-resource settings. While Pap smear testing has been the standard screening method, HPV DNA testing offers potential advantages in sensitivity, cost-effectiveness, and feasibility for large-scale implementation. This study compares the efficacy, cost, and acceptability of HPV screening versus Pap smears in urban and rural populations of North India. A comparative cohort study was conducted …
Published in International Journal of Women's Health Nursing And Practices · Vol. 3, Issue 2, 2025 · pp. 31–37 Read article
-
Tailoring The Electrochemical Interface of Graphene–Gd₂O₃ Nanocomposites for Advanced Energy Storage
Abstract: Graphene–Gd₂O₃ nanocomposites were synthesized by incorporating varying concentrations of reduced graphene oxide (rGO) into Gd₂O₃ using a straightforward room-temperature solution method. The composites were analyzed using various distinct characterization techniques, including X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Electrochemical measurements, particularly cyclic voltammetry (CV), demonstrated that the incorporation of graphene significantly enhanced the electrochemical performance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 369–388 Read article
-
Internet of Things based Car Parking System using ESP- 32 and Blynk
Abstract: The security of the vehicles at the populated places has always been an area of concern. At many crowded places where a number of vehicles enter and exit every day, the security has to be taken into account so that chaos is reduced by using an efficient model. This paper shows the implementation of an Internet of Things based car parking system which consists of electronic components such as infrared …
Published in Current Trends in Signal Processing · Vol. 12, Issue 1, 2022 · pp. 21–28 Read article
-
An Investigation of Binders for the Production of Biomass Briquettes from Sawdust and Cow Dung Admixture
Abstract: This study explored an investigation on the effect of binders for the production of biomass briquette from saw dust and cow dung admixture for domestic cooking applications. The materials used to investigate the study were sawdust and cow dung was treated, and the sawdust was grind and screened using sieve mesh size into particle size of 2mm. The biomass briquettes were produced by mixing sawdust and cow dung within the …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 2, 2023 · pp. 1–11 Read article
-
Effect of catalyst and methanol on synthesis of methyl esters from used cooking oil
Abstract: Due to depletion in the fossil fuels and the increase of energy usage, the rapid depletion of fossil fuel is accelerated. Therefore, using renewable energy is a key solution to the problem of fossil fuel depletion. There are several resources of renewable energy like geothermal energy, solar energy, and biofuels. Biodiesel is a fatty acid alkyl ester made from renewable resources such as used cooking oil. The attractiveness of biodiesel …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 1, 2021 · pp. 42–51 Read article
-
EXPERIMENTAL INVESTIGATION OF WELDING PROCESS PARAMETERS ON MECHANICAL PROPERTIES FOR TIG WELDED AUSTENITIC STAINLESS STELL 304 JOINTS
Abstract: Minimally invasive surgeries are the most elusive, yet highly demanded subset of surgeries which requires precise knowledge of the pertinent patient. Compared to conventional surgeries, minimally invasive surgeries are characterized by less pain, low risk of infection, lesser scarring, etc. In the status quo, doctors use intuition through experience to determine the parameters for surgery such as the force required to cut, size of cut, depth of cut, etc. With …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 2, 2018 · pp. 6–9 Read article
-
Investigations on Mechanical Properties of Al 8011 Reinforced with Micro B4C/Red Mud by Stir Casting Method
Abstract: Aluminium metal matrix composites are emerging as the most versatile material for unique automotive, aviation, aerospace, defense, marine applications and other structural applications due to their excellent mixture of properties. In the present investigation, a hybrid composite of Al8011 aluminium alloy reinforced with B4C and red mud was fabricated by stir casting method. Red mud is one of the major waste material extracted from the bauxite ore of alumina during …
Published in Journal of Electronic Design Technology · Vol. 7, Issue 1, 2016 · pp. 32–38 Read article
-
Influence of process parameter on Lack of Fusion in T.I.G. welding of S.S. 304 – A Review
Abstract: The T.I.G. welding or gas tungsten arc welding (GTAW) process is widely used in many appliances because of its versatility in industry. For GTAW process, metals like carbon steel, stainless steel, aluminium, copper, low-alloy steel and non-metal also are widely used in all positions. Butt joint, lap joint, T-joint, edge joint, corner joint are the common types of joints used in welding. The incompletely fused spots like porosity that occurs …
Published in Journal of Industrial Safety Engineering · Vol. 6, Issue 2, 2019 · pp. 26–31 Read article
-
Parameters Optimization of EDM of AISI 316 Stainless Steel Material using RSM
Abstract: In this paper, cutting of SS316 material using electro discharge machining (EDM) with a copper electrode using RSM technique is discussed. Electrical discharge machining (EDM) is one of the earliest non-traditional machining processes [1]. These methodologies are used to analyze the effect of each parameter on the machining characteristics and to predict the optimal choice for each EDM parameter such as peak current, gap voltage and pulse on time. It …
Published in Journal of Industrial Safety Engineering · Vol. 3, Issue 2, 2016 · pp. 23–29 Read article