Search
551 articles for “steels”
-
Seismic Response for RC Frames on Sloping Ground using Pushover Analysis
Abstract: Open story structures are to be mainly susceptible to collapse and severe damage under earthquake excitation in hill areas. Nowadays many buildings constructed have soft ground story for various purposes, for example, multipurpose hall, parking etc. The examination has been led to get the reaction of RC open story building exposed to seismic tremor loads. In present work, twelve storied structure on inclined ground (150 with horizontal) are considered. The …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 36–46 Read article
-
Damage Assessment and Strengthening of Transmission Line Tower at Component Level
Abstract: The damage assessment and strengthening of transmission tower is an important factor to be considered for life enhancement. The transmission towerdeteriorate due to corrosion and ageing. In this paper, analytical and experimental investigation is carried out at component level on cantilever beam made of square hollow and angle section. The damage is inflicted by reducing the stiffness of the beam. The damage is assessed based on frequency response measurements. The …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 9–15 Read article
-
Octagrid an Alternative Lateral Load Resisting System
Abstract: The cost of the land in the rapidly developing urban cities have skyrocketed in the last few decades. Acquiring a piece of land has become very difficult for the builders and developers for different amenities and hence the concept of tall buildings has spread its roots in the urban infrastructure scenario. Tall buildings facilitate the optimum use of land and many amenities such as offices, residential apartments, shopping malls and …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 3, 2020 · pp. 29–33 Read article
-
Continuity Plates in the Connections of I-Beam to Box Column have been Replaced with Novel External Stiffener
Abstract: This paper addresses the implementation difficulties of continuity plates inside of box-column, where the I beam is connected by a novel design. In this design, there is no continuity plate inside the box-column. At the end of the beam, where it should be connected to the column, its flanges are symmetrically cut and connected to the beam with two divergent plates as external stiffeners which can distinguishably be noted a …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 1, 2017 · pp. 19–26 Read article
-
A Study of Affordable Roofing System using Square Pyramidical Panels
Abstract: Affordability of housing unit is a worldwide concern. The term affordable roofing is used to describe the low cost dwelling units, which are inexpensive and reasonably priced and can easily serve to certain group of people within specified income range. Structural roofing system contributes substantially to cost of construction of housing unit in normal situation; hence, any savings attained in roofing system will reduce the cost of construction of housing …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 1–8 Read article
-
Investigation of Web-Hole Effect on Web Crippling Strength of Cold Formed Channel Section
Abstract: This paper presents an experimental, theoretical and numerical investigation on lipped channel sections with circular web holes subjected to two loading conditions as specified in the American specifications for cold formed steel structures, namely, interior-two-flange and end-two-flange. For interior-two-flange, the web holes are provided (i) at center beneath bearing plate and (ii) at offset distance. For end-two-flange, web holes are provided at (i) center beneath bearing plate and (ii) 1/4th …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 2, 2015 · pp. 6–12 Read article
-
Dynamic Wind and Seismic Effect on Hexagrid Structure
Abstract: As the height of the structure increases above 80m the wind lateral forces on the structure become more and more dominant than others. Furthermore, the wind dynamic calculation required for the proper Analysis of the wind. In the current paper the wind gust force has calculated by using IS 875:2015. The calculated forces have been applied on the Steel moment frame building along with the peripheral braced system. The peripheral …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 1, 2021 · pp. 15–23 Read article
-
Comparative Vibrational Analysis of Foot Over Bridge for Different Deck Properties
Abstract: Damping performs essential function in format of vibrational resistant structures, which lower the change of the shape when they are subjected to lateral loads or vibrational load. In the existing study the deck of bridge is check for various materials like MS steel plate, RCC slab, and aluminum and MS plate composite deck. The important challenge of a structure is to endure the vibrational loads on deck slab. In order …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 1, 2021 · pp. 24–31 Read article
-
Deformation Resistance Evaluation Of High Rise Building Frame Elements With Core Wall As Lateral Load Resisting System
Abstract: As a building's height increases, lateral loads have a significant and quickly impact. The sort of lateral system used in high-rise structures has a significant impact on the manner in which the structure is built, and choosing the right lateral structural system is crucial to the structures reaction. Numerous factors, including the system's structural design, cost, sustainability, and material availability, influence the choice. Structure with core wall system, braced frame …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 1–7 Read article
-
Seismic Performance of Mono-Support Building Equipped with Exoskeletons
Abstract: Seismic performance of the structure is one of the most crucial and important aspect of structural engineering. There have been many developments in the field of seismic resistance to enhance the behavior of the structures during seismically activated conditions. In this study the Seismic performance of buildings standing on singular columns have been studied. To enhance the dynamic behavior of the structures analyzed, the buildings were additionally equipped with steel …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 2, 2023 · pp. 13–22 Read article
-
Study of Shear Strength and Hardness of Resistance Spot Welding for Automotive Applications
Abstract: Resistance spot welding is the most popular process used in automotive and aerospace for joining of sheet metals of different thicknesses, shapes, and materials. There has been already much research done on the resistance spot welding. This review paper gives an overview of the performance of resistance spot welds in an automobile. For this, AWS D8.9M:2012 (Test Methods for Evaluating the resistance spot welding behaviour for automotive steel sheet materials) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 1–9 Read article
-
Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded AA6061-T6 Joints
Abstract: Friction stir welding is a solid state joining process capable of joining similar and dissimilar materials, initially developed for joining of aluminium alloys. In the present work, the effect of friction stir welding parameters on the microstructure and mechanical properties of aluminium joints is studied. An attempt has been made to investigate the weldability of Al6061-T6 alloy using high speed steel tool in friction stir welding machine. Dye penetration test …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 1, 2019 · pp. 10–16 Read article
-
Processing of Magnesium Metal Matrix Composite Reinforced with Graphene Nano Platelets through Vacuum Stir Casting and Investigating its Mechanical Behaviour
Abstract: AbstractThe application of metal matrix composites (MMCs) as structural engineering materials has received increasing attention in recent years. Their high strength and toughness at elevated temperatures coupled with low-density makes them suitable for use in applications where conventional engineering materials, such as steel are used. MMCs exhibit significantly higher stiffness and mechanical strength compared to matrix alloys, but often suffer from lower ductility and interior fracture toughness. MMCs have the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 21–29 Read article
-
Electroplating and Corrosion Properties of Binary and Ternary Zinc Alloys with Nickel, Cobalt and Iron
Abstract: The anti-corrosive three binary (Zn-Ni, Zn-Co, Zn-Fe) and two ternary (Zn-Ni-Co, Zn-Co-Fe) alloy coating films on mild steel from acid chloride bath using sulphanilic acid and gelatin as additives for the electroplating technique. The normal Hull cell method was used to optimize the bath compositions, temperature and pH of the bath solutions for coating performance against corrosion. The cause of current density (CD) on metal weight percentage (M = Ni, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 3, 2021 · pp. 1–7 Read article
-
Amorphous composite coating’s ability to resist corrosion
Abstract: To increase the mechanical qualities of the coatings, amorphous composite coating was applied to the carbon steel substrate using arc spraying and remelted using a plasma remelting technology. Micro structural microscope, scanning electron microscope, energy dispersive spectroscopy, X-ray diffraction, and microhardness tester were used to examine the composition, microstructure, and characteristics of the composite coating. After the plasma remelting, the microstructure of the composite coatings for amorphous materials was more …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 2, 2022 · pp. 12–16 Read article
-
Frictional properties of thermally processed electroless nickel coatings
Abstract: Electroless plating was used to deposit the nickel (Ni) coatings on the carbon steel substrate, both with and without incorporated cubic boron nitride (c-BN) nanoparticles. Coatings were put through tests under both heat-treated and as-deposited conditions. In addition to measuring hardness and roughness, the coating structure was characterized. Under dry and water lubricated contact circumstances, the friction characteristics of bronze, used as the counter-body material, were investigated. coefficients of friction …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 2, 2022 · pp. 27–31 Read article
-
A Brief Overview of the Removal of Fluoride and Chromium Using Polymer Adsorbents
Abstract: Water tainted with heavy metals are the serious worldwide issues face today because of economic and industrial growth. Even at trace amounts, hexavalent chromium is a significant metal ion pollutant that is highly harmful to humans, animals, plants, and microbes. There are several methods for purifying water, but adsorption is one of the most straightforward, practical, and cost-effective approaches. Chromium is one such significant metal that may be released by …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 1–14 Read article
-
Mitigation of Harmonics in Industries using a Multilevel Shunt Active Power Filter
Abstract: The vast development in power electronic equipments causes higher harmonics in the distribution line in order to reduce the harmonics. This work proposes a design of Multi-Level Inverter (MLI) based Shunt Active Filter (SAF) intended to sort out the presence of harmonics in the distribution line. This proposed SAF utilizes three level diodes clamped MLI as VSI. d-q theory is employed for reference signal generation. In order to regulate the …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 8, Issue 3, 2021 · pp. 39–50 Read article
-
Effect of Corrosion on Flexural Strength of Reinforced Concrete Beam: An Experimental Study
Abstract: AbstractThe main aim of this experimental study is to investigate the effect of corrosion on reinforced concrete beams, particularly on load deflection behavior, load carrying capacity and crack width by using with or without epoxy coating on the steel surface. Accelerated corrosion technique was adopted to corrode the beam experimentally. The corrosion was measured using the Open Circuit Potential (OCP) measurement instrument. A total of 14 simply supported beam specimens …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 1–7 Read article
-
Comparison of IS 456 and its Amendments to Analyses and Design a Multistoried Building (G+7) by using STAAD Pro.
Abstract: In this paper, a study has been made for the economic structure which is analyzed and designed according to the Indian standards. The comparison of IS456:2000, IS1893:2002 and its amendments to analyses and designs a multistoried building [G+7] using STAAD Pro.The planning is completed by taking in to account the necessities and standards recommended by IS code, the design is completed using the assistance of Auto CAD and also the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 6–13 Read article