Search
1068 articles for “reinforce”
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Durability Design of Reinforced Concrete Beams Using Cost Minimization by Excel Solver
Abstract: Design procedures based on current specifications do not always ensure required service life, mostly because of the underestimated durability parameters. This is due to the fact that definition of durability is not operational as basis for design, maintenance and repair. This paper presents an Excel spreadsheet model for the cost optimization of simply supported beams designed according to the requirements of the American Concrete Institute (ACI) code and the Japan …
Published in Journal of Construction Engineering, Technology & Management · Vol. 5, Issue 3, 2015 · pp. 75–81 Read article
-
Experimental Study on Fibre Reinforced High Performance Concrete with Silica Fume
Abstract: This paper presents the effect of silica fume and glass fibre in High Performance Concrete (HPC). In this study, High Performance Concrete mixes with silica fume of 0, 10, and 20% with addition of glass fibre of diameter 14 μ and 12 mm length at various percentages as 0, 0.3, and 0.6% by the volume of cement on M75 grade of concrete. The mix proportions of concrete had a constant …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 1, 2013 · pp. 26–30 Read article
-
Probabilistic Sensitivity Analysis of Cover Quantity and Quality of Reinforced Concrete Structures
Abstract: Design procedures based on current specifications do not always ensure required service life, mostly due to the environmental effect, error at the time of construction and underestimated cover properties at the time of design. Moreover, single-point value of any property does not provide rational support to the decision maker. Statistical resampling technique for each of the cover properties used to find out the service life of the structures is thus …
Published in Journal of Construction Engineering, Technology & Management · Vol. 2, Issue 1-3, 2012 · pp. 48–53 Read article
-
Experimental investigations on mechanical properties of AL8081 reinforced with B4C particulate Mmc’s
Abstract: The aluminium metal matrix composites are becoming emerging and most versatile material. Aluminium MMCs are widely used since the applications involved in automotive, unique structural, defence and aerospace. At the elevated temperature levels, the potentiality of Aluminium MMCs is very high. The metal matrix composites (MMCs) mainly mitigate the weight ratio. In this article, the aluminium metal is conjugated with B4C particulates by stir casting approach. The stir casting method …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 12–16 Read article
-
A POLYESTER RESIN COMPOSITE-BASED EXPERIMENTAL INVESTIGATION OF CHARCOAL PARTICLE REINFORCED GLASS FIBRE
Abstract: The mechanical characteristics of jute/E-glassfibre polyester composites were examined (AC) after theincorporation of activated carbon particles. The polyestermatrix was loaded with five different particle loading ratios(0, 5, 10, 15 and 20 percent). To increase the adhesion of jutefibres to the polyester matrix, they were treated in a NaOHsolution. Hardness, tensile, and water absorption tests wereperformed on polyester, Activated Carbon- filled polyesterand jute/E-glass fibers polyester with and without ActivatedCarbon filter. The …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 1, 2023 · pp. 57–62 Read article
-
Effect of Chemical Treatment of Coir Dust on the Dielectric Behavior of Bio-waste Reinforced Polymer Composites
Abstract: The present work is focused on analyzing the effect of the chemical treatment of coir dust fibers on the dielectric properties of epoxy polymer matrix composites. Coir dust is a spongy, peat-like residue obtained from the processing of coconut husk for coir fiber .The coir dust was washed and sun dried. The dried coir dust was treated with chemicals such as HCl, CH3COOH, KOH and NaOH. An untreated and treated …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 84–96 Read article
-
Halloysite nanotubes – A novel reinforcing material for future applications
Abstract: The distinctive nano materials such as nano powder, nano fluids, nano tubes, nano rods, nano particles, nano fibres and so forth are used in the field of nanotechnology. These nano materials are toxic in nature so not viewed as safe for people and for nature too. Halloysite nano tubes (HNT) are eco-friendly, naturally occurring cheaply available kaolinite group mineral. HNT incorporated materials have good in strength, thermal resistance and freely …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 34–40 Read article
-
Infrared Spectroscopic Studies on Multiwalled Carbon Nanotubes Reinforced Acrylonitrile Butadiene Styrene Composites
Abstract: AbstractFourier Transformed Infrared (FT-IR) Spectroscopic analysis is an effective technique to captures the response of the molecular motions such as stretching, bending and torsional vibrations of materials. In this study, FTIR analysis has been done on two different grades of multiwalled carbon nanotubes (MWCNT) C100 and NC7000. NC7000 grade MWCNT has a higher degree of crystalinity and shows 60% higher absorbance in the wavelength range of 600-3600 cm-1. These two …
Published in Journal of Polymer & Composites · Vol. 2, Issue 3, 2023 · pp. 15–22 Read article
-
A Review on Tensile and Flexural Properties of Natural/Glass Fiber Reinforced Polymer Composites
Abstract: In the most recent decade, natural plant fibers like (jute, sisal, banana, hemp, kenaf, and so on) are getting consideration from numerous analysts and academicians to use it as a substitute support of engineered fiber strengthened polymer composites. Composite assume huge job as designing material and their utilization has been expanding step by step because of their particular properties, for example, high solidarity to weight proportions, high modulus to weight …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 70–80 Read article
-
Development of a predictive model for determining mechanical properties of nano Al2O3 reinforced adhesive bonded SS304 single lap joint
Abstract: In this study, single lap joints were prepared by adding nano-additives (Al2O3) in the quantity of 3 wt % in the phenolic resin, and the overlap length was varied to observe the effect on joint engineering properties. In the experiments, a single component system of a specific grade of phenolic resin was used as a binder, and aluminum (AA8011), as well as stainless steel (SS304), was used as adherends. The …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 20–28 Read article
-
Seismic Analysis of Ductile Detailed Reinforced Concrete Structure for SMRF with & without Shear Wall with reference to IS13920:1993(Old Code) & IS13920:2016(Revised Code).
Abstract: Abstract The occurrence of earthquake has increased recently causing severe damage to human life and property. Hence accurate seismic analysis of structure is needed to be carried out considering all the parameters of the building. There are two methods for seismic analysis one is static and the other is dynamic method i.e. Seismic Co-efficient method for static analysis and Response Spectrum method for dynamic analysis of the building. In this …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 74–80 Read article
-
Comparative Study of Steel Fiber for various shape
Abstract: This research paper presents a comparative study of metal-reinforced steel fibers in concrete. The study aims to analyze the effects of incorporating metal fibers along with steel fibers on the Compressive, flexure, and structural properties of steel fiber-reinforced concrete (SFRC). Analytical review were conducted on various concrete mixtures, comparing samples with different shape of steel fibers. The results show that the addition of metal fibers improves the mechanical properties of …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 8–13 Read article
-
Design and Experimental Analysis of Steel Fibre Reinforced Concrete
Abstract: The concrete structure when exposed to elevated temperatures, shows the various compound changes in the substantial which prompts weakening of the construction. The principle objective of the review is to diminish the underlying component disappointment when presented to raised temperature, which thusly builds the departure time of the inhabitants during fire mishaps. Further, when the structures are presented to fire, there is the opportunities for the opposite finish of the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 1, 2022 · pp. 11–20 Read article
-
Modeling of Thermocol Waste Polymer Reinforced Asphalt Bitumen
Abstract: The purpose of this research is to investigate the possibility of using thermocol waste as polymer additives in Bituminous Mix. The characteristics of thermocol modified binder obtained by fix mixing temperature, was investigated. The binders were prepared by mixing the PET in 1, 2, 3, 4 and 5% (by the weight of optimum bitumen) with 80/100 penetration grade bitumen at temperature of 150ºC. It may be inferred that PET-modified bituminous …
Published in Trends in Transport Engineering and Applications · Vol. 2, Issue 2, 2015 · pp. 12–16 Read article
-
Effects of Halloysite Nano particle Reinforcement of Epoxy Composite Using a Diglycidyl ether of bisphenol-A Prepared by Ultrasonication Casting
Abstract: This study explores a simple and operative approach for developing stronger epoxy-based composite materials by incorporating halloysite nanotubes (HNTs). The composites were made-up through hydraulic compression casting, combining ultrasonic mixing with applied pressure to produce consolidated composite sheets. HNTs were added to the epoxy resin at concentrations ranging from 1 to 5 wt.% at approximately 60°C, and the subsequent composites were examined to understand their internal structure, nanotube dispersion, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Degradation of Building Materials by Corrosive Pollutants
Abstract: Fiber reinforced polymers (FRP) is used for the corrosion suppression of reinforced concrete structures (RCS). One of the main issues with reinforced concrete constructions is corrosion. It interacts with acids, alkalis and salts to produce disintegration in building materials components. Pollutants and effluents speed up disbanding inside and outside reinforced structures. Bio-wastes come in contact of building materials to develop miro and macro-organism and these organisms release acid substances to …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 15–24 Read article
-
Comparative Investigation on Mechanical Properties of AMCs Fabricated through Liquid and Solid-State Fabrication Process
Abstract: This current research work is primarily focused on comparative experimental study on effect of two distinct fabrication process routes i.e. liquid state and solid state process and their corresponding parameters on microstructure and micro-hardness properties of Aluminium matrix composites (AMCs). In this work, AMCs were fabricated by reinforcing Al2O3 powder materials of 5, 10 and 15 wt.% into pure Aluminum (Al) matrix phase through two distinct processes; liquid state (stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 202–215 Read article
-
Utilization of Recron Fibers for Improving Subgrade Stability of Expansive Soils
Abstract: The major interest in the utilization of synthetic fibers is used as reinforcing material for developing reinforcing effect into the entire soil composition laid bellow the structures whare as construction works are going on. Various articles are published on soil reinforcement, yet some of them fibers used are prepared by using with synthetic materials, one type of synthetic fibers were Recron fiber it is used as a reinforcing element to …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 170–178 Read article