Search
957 articles for “S/N ratio”
-
Effect of Used Cooking Oil on the Characteristics of Concrete including Gap-graded Aggregate
Abstract: Due to large amounts, more than one billion gallons, of used cooking oil which are produced yearly, there is a need to carry out the sustainability for construction materials. This study aims to investigate the effect of Used Cooking Oil (UCO) on the fresh and hardened properties of concrete using different percentages from this oil with gap-graded aggregate. Ten concrete mixes were conducted in the laboratory for two mixing proportion …
Published in Journal of Construction Engineering, Technology & Management · Vol. 7, Issue 1, 2017 · pp. 55–66 Read article
-
The Mechanical Properties of Manganese Chloride Salt Reinforced [PVA: PVP] Blend Films
Abstract: In this study, pure [PVA: PVP] polymer blend film and MnCl2·4H2O salt reinforced polymer blend films at different weight ratios (10–50) wt%) were prepared by using the casting method. The effect of salt weight ratio on the mechanical properties of the [PVA: PVP] polymer blend films reinforced by MnCl2·4H2O salt was also studied. The experimental results obtained from the tensile test of the [PVA: PVP] polymer blend films reinforced by …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 2, 2021 · pp. 16–23 Read article
-
A Review of Particle Swarm Optimization
Abstract: Particle swam optimization (PSO) is a computational technique that streamlines a problem by attempting to improve the arrangement of an applicant with respect to a given value ratio iteratively. This approaches the problem by having a number of candidate solutions, and then pushes the particles in the search space according to a mathematical equation over the position and velocity of the particles. Researchers and specialists have provided various perspectives and …
Published in Journal of Communication Engineering & Systems · Vol. 11, Issue 2, 2021 · pp. 29–36 Read article
-
Adverse Drug Reactions and Pharmacovigilance of Herbal Medicines in India
Abstract: The use of ayurvedic medicines is popular in India and in recent times has become accepted in other countries. Associated with this increasing use, are growing concerns about the safety of ayurvedic medicines. This paper discusses in brief the ayurvedic concepts of adverse reactions to medicines, the need for pharmacovigilance of ayurvedic medicines, challenges in introducing pharmacovigilance in ayurveda and some recommendations to successfully implement these activities. Pharmacovigilance is the …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 5, Issue 1, 2016 · pp. 10–13 Read article
-
Polymer Nanocomposites As Emerging Platforms in Pharmaceutical Nanotechnology
Abstract: Nanotechnology allows the handling of materials in the 1–100 nm range, where distinct physicochemical phenomena, including quantum effects and higher surface-to-volume ratio, enable disruptive uses in pharmaceuticals and biomedicine. Significant challenges in solubility, stability and targeted biodistribution of therapeutics can be overcome by incorporating nanostructured polymers and polymer-based composites into drug delivery systems. PLGA nanoparticle and other nanocarriers, such as PLGA micelles, dendrimers, and hydrogels, have revealed promising effects on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 268–278 Read article
-
Modeling and Analysis of the Impact of Natural Gas Composition Variations on Combustion in a Dual Fuel Compression Ignition Engine
Abstract: The desire to meet rising energy demands while simultaneously adhering to stringent climate policies has propelled advanced combustion technologies and alternative fuels. Natural gas (NG) is an attractive, domestically-available alternative that has been shown to achieve high efficiencies when used on dual fuel engines. However, the composition of NG can vary significantly depending on the source and these variations may detrimentally impact engine operation. To study these effects, a dual …
Published in Journal of Automobile Engineering and Applications · Vol. 5, Issue 2, 2018 · pp. 1–14 Read article
-
Homeopathy: The Evidence and Basis of Physiological Medicine
Abstract: AbstractIt is time we looked at a fresh, new scientific model for homeopathic remedy action on living systems — one that is logically and rationally based. A paradigm that explains why homeopathy is scientifically “plausible” and how homeopathic remedies exert their biological effects primarily as nanostructures and why physiology, not pharmacology, is the most appropriate discipline for studying and validating the credo. This is imperative to bring two sequels to …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 3, Issue 3, 2014 · pp. 11–18 Read article
-
Dielectric Studies of 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 Nanoceramic Fabricated by Chemo-mechanical Process
Abstract: The present investigation is aimed toward investigate a straightforward, inexpensive, and environmentally friendly chemo-mechanical method for preparing high-dielectric materials, specifically 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 (BCT-CCTO), by combining metal nitrate combustion with solid TiO2 powder and titanium isopropoxide, Ti (OR)4. The composite was prepared by the mixing of individual materials of Ba0.8Ca0.2TiO3 and CaCu3Ti4O12 through the chemo-mechanical method. Initially, 99% pure Ba (NO3)3, Cu (NO3)2∙3H2O, TiO2 and glycine were taken in their stoichiometry ratios. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–21 Read article
-
Effect of Particle Size Mix Ratio of Clay and Agro-Based Material for AGO and PMS Treatment on Microbial Growth
Abstract: The characteristics of possible microbes isolated and identified on adsorption process involving AGO and PMS as contaminants in fresh water medium was monitored using agro – based materials. The formulated adsorbent is made of clay with ago-based materials of Banana Ogoni Red (BOR) Banana Native (BN), Plantain Agbagba 1 (PA1), and Plantain Ogoni Red (POR). The particle size mixed ratio of clay to the various agro-based materials were 150𝜇𝑚 R5:5, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 2, 2024 · pp. 05–14 Read article
-
A Dual Material Control Gate Tunnel Field Effect Transistor for an Asymmetric Doping at Source and Drain Regions
Abstract: Double-Gate tunnel FET devices, which uses high-κ gate dielectric, are explored using realistic design parameters, showing an ON-current as high as 0.23 mA, a gate voltage of 1.8 V, an OFF-current of not more than 1 fA (neglecting gate leakage), an improved ordinary subthreshold swing of 57 mV/dec, and a lower point slope of 11 mV/dec. A dual material control gate tunnel field effect transistor for an asymmetric doping at …
Published in Journal of VLSI Design Tools and Technology · Vol. 8, Issue 3, 2018 · pp. 45–53 Read article
-
Design and Dynamic Analysis of W-9 Engine
Abstract: Internal Combustion Engines are used in many applications. In the present competitive world, the Automotive Sector which is rapidly growing up with the use of four-stroke I C engine. Hence in this report the work on W-9 engine is considered. Here, the design of W-9 engine is developed for increasing power of engine and also reducing the cost of manufacturing in an automobile sector. In this thesis, the design of …
Published in Journal of Automobile Engineering and Applications · Vol. 2, Issue 3, 2015 · pp. 30–62 Read article
-
Simulation and Optimization of Syngas Generation Process (GTL Stage I) using ASPEN Hysys
Abstract: The process of gas to liquid (GTL) conversion has been divided into three sections (section I: natural gas treatment and syngas production; section II: is Fischer Tropsch Synthesis sections (Main Reactors) and Stage III: Upgrading and treatment section).This work is mainly for Stage I. whereby Natural gas dehydration unit is simulated using Tri-ethylene Glycol to dehydrate the natural gas which includes (Free Water Knockout Drum (FWKD), Absorber and Distillation). Sweetening …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 48–67 Read article
-
Seismic Analysis of Symmetrical and Unsymmetrical Multistory Building with Shear Wall and Hybrid Shear Wall
Abstract: Shear walls are structural systems which provide stability to structures from lateral loads like wind, seismic load. Shear walls are added to the building interior to provide more strength and stiffness to the building when the exterior walls cannot provide enough strength and stiffness. It is necessary to provide these shear walls when the tolerable span width ratio for the floor or roof diaphragm is exceeded. Shear walls are mainly …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 32–35 Read article
-
Assessment of Sustainable Composite for UAV structural Application
Abstract: Now-a-days aligned with global mission the growth of Unmanned aerial vehicle (UAV) application is enormous in the field of agriculture, defence, surveying etc., This research work investigates the improvement in strength of polymer matrix composite material of adding epoxy polymer resin with novel bio fibers such as Tamarindus and Morinda. The composite material was fabricated by using hand-layup method later its mechanical properties are analysed by numerical method as well …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 359–377 Read article
-
Design and Simulation of Triple Band Microstrip Patch Antenna for Ku-band, K-band and Ka-band Applications
Abstract: AbstractThis paper represents a microstrip patch antenna for future 5G-communication technology. The proposed antenna designs are simulated and their performances are analyzed for different parameters like lower return losses, higher gain, voltage standing wave ratio (VSWR), current distribution, far field radiation and wide bandwidth performance for the tri-frequency band operation in Ku band (12–18 GHz),K-band (18–27 GHz) and Ka-band (27–40 GHz) as per the specified IEEE standard. The proposed antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 7, Issue 1, 2020 · pp. 26–33 Read article
-
Impact of Shape, Size and Crystal Structure on Vacancy Related Properties of Gold Nanoparticles
Abstract: It is necessary to consider defects to explain the electron movement, thermal transport and mechanical properties of materials. In the present study, a simple quantitative model for cohesive energy of nanoparticles is extended to determine the size, shape and crystal structure effect on vacancy formation energy, vacancy entropy, and vibrational frequency in free surface Au nanoparticles. Vacancy entropy variation with size has been studied for spherical, regular octahedral, regular hexahedral …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 223–229 Read article
-
Impact of Specially Prepared Food on Indian Big Carp Growth in West Bengal, India’s Cooch Behar District
Abstract: This four-year longitudinal study (2008–2012) in the Cooch Behar District of West Bengal, India, utilized on-farm ponds to evaluate the comparative growth performance of Indian Major Carps (IMCs) – Catla catla, Labeo rohita, and Cirrhinus mrigala – when subjected to four distinct supplementary feed formulations: fishmeal (A), soybean meal (B), silkworm pupae (C), and mustard oilcake (D). The experimental design contrasted treated ponds receiving formulated feed against control ponds relying …
Published in Research and Reviews : Journal of Veterinary Science and Technology · Vol. 15, Issue 1, 2026 · pp. 7–12 Read article
-
Sustainable Development of Carbon–Sisal Reinforced Polyester Composites through Green Nanotechnology
Abstract: This study presents the sustainable development of carbon–sisal fiber reinforced polyester composites enhanced through green nanotechnology for improved mechanical performance and environmental compatibility. The hybrid composites were fabricated using varying fiber ratios - C1 (70% carbon, 30% sisal), C2 (60% carbon, 40% sisal), and C3 (50% carbon, 50% sisal) - with an optimized addition of 1 wt.% nano-silica (SiO2) synthesized via a green sol–gel route. The tensile, flexural, and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1179–1194 Read article
-
Enhancement of Horizontal Jet Impingement Heat Transfer Analysis on Vertical Flat Plate
Abstract: This research investigates the heat transfer characteristics and heat flux distribution associated with parallel jet impingement on a vertical flat plate. A comprehensive computational fluid dynamics (CFD) analysis is carried out and systematically validated against available experimental data to ensure the accuracy and reliability of the numerical model. The jet length is maintained constant at 12 mm, while the jet-to-plate separation distance is varied at 6, 12, 18, and 24 …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 65–80 Read article
-
Modelling and analysis of machining characteristics of aluminium composite on CNC by Taguchi L9
Abstract: The machining of aluminum silicon oxide is used in high speed CNC milling in light of the fact that such composites have number of applications in the aeronautics industry. The inspiration driving this examination is to explore the effects of machining parameters on surface roughness and material expulsion rate in high exactness CNC machine since industry requires low surface unpleasantness and high material expulsion rate, the model for surface harshness …
Published in Trends in Mechanical Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 1–7 Read article