Search
98 articles for “reinforced corrosion”
-
Self Healing Material: An Introduction
Abstract: Self-healing materials have emerged as a transformative innovation for sustainable infrastructure and advanced applications such as wearable electronics and smart transportation systems. These materials possess the intrinsic ability to repair damage autonomously or with minimal external intervention, thereby extending service life and reducing maintenance costs. Inspired by biological systems, self-healing mechanisms are broadly classified into extrinsic approaches, such as microcapsule and vascular networks based healing, and intrinsic mechanisms involving reversible …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 604–611 Read article
-
Development of Structural Health and Damage Assessment Chart of a Building
Abstract: As the requirement of infrastructure is increasing day by day, process of new construction is increasing rapidly but the quantity of old infrastructures is more, also new construction has some limitations, so the pre-constructed structures should be maintained properly to achieve their full life and also to reach economic balance. Building structures deteriorate with respect to time due to various environmental conditions like temperature, presence of moisture, humidity and gases, …
Published in Journal of Construction Engineering, Technology & Management · Vol. 7, Issue 2, 2017 · pp. 63–74 Read article
-
Bond Response of RCC Cube by using Glass Fiber Reinforced Polymer Bar
Abstract: The results of an experimental examination into the flexural and bond characteristics of Glass fibre reinforced polymer material in structural concrete are presented in this paper. In this study, glass fibre reinforced polymer bars of varied diameters were used. The performance of these bars with full and partial steel bar replacement is investigated. The major goal of this inquiry is to use Glass fibre reinforced polymer bars in water retaining …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 1–6 Read article
-
Oxidation Behaviour of Plasma Sprayed Carbon Nanotubes-Alumina Coated ASME-SA213-T291 Boiler Tube Steel
Abstract: In this research work, oxidation behaviour of Carbon Nanotubes reinforced Al2O3 coated ASME-SA213-T91 boiler tube steel specimens were investigated at 900°C temperature in air. The different CNTs-Alumina composite coatings were deposited using plasma spray technique and NiCr was used as bond coat before applying CNTs-Al2O3 coatings. The hot corrosion studies were conducted on all coated specimens in air at 900°C under cyclic conditions. The thermogravimetric technique was used to establish …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 3, 2017 · pp. 1–15 Read article
-
A review of nanocomposite coatings for marine applications
Abstract: This paper reviews the performance and material characterization of nanocomposite coatings on the hydraulic pipelines of Ship A-Frame, which were corroded due to seawater exposure. Hydraulic pipe lines made of carbon steel face severe corrosion due to the highly corrosive nature of seawater with high salinity and microorganisms. The shipping industry utilizes organic and inorganic coatings to safeguard the hydraulic and seawater pipe lines of deck machines from marine pollution. …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 1, 2024 · pp. 1–9 Read article
-
Fabrication and Analysis of Al 7075 Based Metal Matrix Composites - A Review
Abstract: Aluminium 7075 alloys are extensively used in aerospace, marine, aviation, and automotive industries due to their superior mechanical properties, high strength-to-weight ratio, and low density. However, to further enhance their performance, aluminium-7075 metal matrix composites (AMMCs) are developed by incorporating various reinforcements. This paper focuses on the influence of reinforcements on the mechanical, tribological, and corrosion behavior of AMMCs. The study examines fabrication techniques, particularly the stir casting method, which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–12 Read article
-
A STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM-4.5%COPPER ALLOY METAL MATRIX COMPOSITES REINFORCED WITH ALUMINA FIBERS USING SQUEEZE CASTING PROCESS
Abstract: Aim of the present investigation is to develop aluminium-4.5% copper alloy metal matrix composites by reinforcing with chopped alumina fibers in varying percentage like 10%, 20% and 30% and so on. The casting can be produced by using Squeeze casting process; these castings were studied for all its mechanical properties like tensile, hardness, wear and microstructure and corrosion analysis. It is observed that increase in reinforcement improves the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 22–31 Read article
-
A comprehensive study on elemental analysis and sustainable integration of CETP (common effluent treatment plant) sludge as a substitute to sand in concrete
Abstract: This study examines the utilization of sludge from common effluent treatment plants (CETP) as a fractional substitute for sand in M20 concrete mixtures. Its aim is to address disposal challenges associated with CETP sludge while promoting sustainable use of natural resources. The research assesses the structural and microstructural attributes of concrete mixes containing varying percentages of CETP sludge (0%, 10%, 20%, 30%, 40%, and 50%). Tests conducted include compressive, flexural, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 49–59 Read article
-
A Study on Tribological Behaviour of Fly Ash Filled Glass Fiber Reinforcement Epoxy Based Composites Using Taguchi Experimental Design
Abstract: Fiber-reinforced polymer composite materials have better corrosion resistance, better wear resistance, reduced weight of structure, good thermal/electrical insulation and conductivity, etc. due to their properties its application field include aircraft, space crafts, automotive, infrastructure, marine, and sporting goods. But a major industrial problem is erosive wear of structure components caused by abrasive particles. Solid particle erosion of engineering/structure components caused due to dusty operational conductions. But, even today, researchers worked …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 1, 2020 · pp. 1–5 Read article
-
Study Analysis of Nano Particle based Fiber Reinforced Plastics (FRP) Composites
Abstract: Utilization of Fiber reinforced plastics (FRP) composites for development of new and modification of already present structures has increased largely in the past few decades. Fiber Reinforced Polymer composites have many qualities like corrosion resistant, longer life time, less weight, specific stiffness and high strength, are effortlessly built, and can be custom-made to fulfill execution prerequisites [1]. Fiber Reinforced Polymer composites are ordinarily manufactured utilizing a polymer framework, for example, …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 17–22 Read article
-
Service Life Prediction of Concretes Incorporated with Ground Granulated Blast Furnace Slag and Icrete with respect to Chloride Ion Penetration
Abstract: The reduced service life of concrete structures in coastal or de-icing salt conditions is commonly attributed to corrosion generated by chloride. Therefore, extensive research is being conducted to estimate the time taken for threshold chloride ions to reach the reinforcement and break the protective layer, initiating the corrosive process. This study conducted an experimental investigation on controlled concrete, concrete incorporating 50% GGBS, and concrete incorporating both 50% GGBS and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 214–226 Read article
-
Corrosion Characterization of Silicon Carbide and Fly Ash Particulates Dispersion Strengthened Aluminium 5083 Composites
Abstract: Corrosion behavior of aluminium metal matrix composites is a major study aimed at evaluating the potential of using the materials for aerospace components. Aluminium 5083 is a specific class of alloy which is known for its corrosion resistance in extreme environments and is used in aerospace components. However, the studies on effect of reinforcements such as silicon carbide and fly ash on corrosion behavior of aluminium 5083 alloy has not …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 2, 2017 · pp. 9–21 Read article
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Service Life Prediction of Concretes Incorporated with Fly Ash and Alccofine with respect to Chloride Ion Penetration
Abstract: Chloride-induced corrosion poses a significant threat to the degradation of reinforced concrete structures, especially in extreme environments such as marine and industrial exposure conditions, where the damage can be particularly severe. This study provides an experimental investigation utilizing three distinct water-binder ratios (0.3, 0.4, and 0.5) applied to three types of concrete mixtures: conventional concrete, concrete blended with 40% fly ash, and concrete blended with 40% fly ash and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 202–213 Read article
-
Stress and Failure Analysis of Hybrid FRP Laminated Tubular Joints
Abstract: Composite tubes have been used in transporting corrosive fluid in petro chemical and paper industries. [Fiber reinforced Polymers] FRP Composite Pipes are even becoming popular in the offshore oil and gas industry. Bonded joints with tubular adherends are finding applications in various piping industry. In the recent times Hybrid Tubular Bonded Lap Joints (HTLJ) have been extensively used to optimize the cost and to enhance the performance of the joint. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 461–471 Read article
-
Thermal Dissipation Performance of Metal–Polymer Composite Heat Exchanger for Enhanced Thermal Management in Compact Electric Geysers
Abstract: Most electric geysers these days are made from all-metal stuff, like stainless steel tanks and copper coils for heating, plus mild steel on the outside. Standby heat losses can be 20 to 40 watts, and a 15-litre unit weighs around 6 to 8 kilograms. Manufacturing costs are higher, too. Hard water makes it worse, with limescale building up on the heating elements and cutting thermal conductivity by 10 to 30 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–651 Read article
-
Multiphysics Optimization of Polymer–Metal Hybrid Electrode Geometry in Electrostatic Precipitators for Enhanced Particle Collection Efficiency
Abstract: Electrostatic precipitators (ESPs) remain one of the most effective technologies for controlling fine particulate emissions in industrial exhaust systems. However, their performance is strongly influenced by electrode geometry and material characteristics, which govern electric field distribution, corona stability, and particle migration behaviour. In this study, a comprehensive numerical investigation is carried out to optimize electrode geometry using a multiphysics modelling framework, while introducing a novel polymer–metal hybrid design to enhance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 701–716 Read article
-
Corrosion Measurement and Hardness Test of Magnesium-Tri Calcium Phosphate Composite Fabricated by Stir Casting
Abstract: Magnesium MMC is preferred in applications requiring high-quality materials and has replaced monolithic materials. Bio-implants traditionally used are titanium, steel, and nickel-titanium alloys, however, their removal necessitates surgery, which is costly and painful. While biodegradable 3D-printed implants are effective and eliminate the need for a second surgery, they remain expensive. After several studies to solve this issue, the development of biodegradable implants is considered. Magnesium possesses good biodegradable properties. An …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 436–447 Read article
-
Advanced Fiber-Reinforced Polymer Composites: Processing, Nano-Modified Adhesive Technologies, Interfacial Engineering, Durability, and Structural Applications—A Comprehensive Review
Abstract: Fiber reinforced polymer (FRP) composites are considered to be one of the most universal categories of advanced engineering materials owing to their unique properties such as outstanding strength-to-weight ratio, corrosion resistance, fatigue durability, and wide opportunities for design. Innovations in the fields of fiber reinforcement, polymer matrix system, composite manufacturing technologies, and nano-modified adhesives technology have greatly extended the range of applications of this type of materials in aerospace, automotive, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 980–990 Read article
-
Application of Industrial Waste in Metal Matrix Composite
Abstract: AbstractKeeping the goals of protecting the environment and exploring low-cost options for the development of metal matrix composites (MMCs) using cheap reinforcing materials which obtained from recycling techniques of agro and industrial waste products become one of the new interest fields of the researchers. The industrial wastes reinforce materials in useful way not only save the manufacturing cost of products but also reduce the environmental pollution. This paper represents a …
Published in Journal of Polymer & Composites · Vol. 4, Issue 3, 2016 · pp. 27–34 Read article