Search
132 articles for “physical & mechanical characterization.”
-
A Literature Review on Al-Si-TiB2 In-situ Metal Matrix Composites
Abstract: This review focuses on various aluminium alloys as matrix materials used for synthesis of in-situ metal matrix composites(MMCs) with different reinforcements like graphite, Al2O3, SiC, TiB2 and so on for their excellent characteristic properties. Taking their limitations into account, tailoring the physical, mechanical as well as wear properties of these composites with the use of appropriate type and amount of reinforcement along with optimum process parameters has also been investigated …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 7–19 Read article
-
Investigation of Physical Characteristics and Machining Parameters of Improved Al-SiC MMC Using Dry EDM Process for Aerospace Industries
Abstract: Aluminium-based composite is widely used in aerospace and automobile industries because it is lighter in weight; but the trouble is that it is easily worn-out and life of the components is decreased. To overcome these problems, aluminium silicon carbide composite material has been developed with good wear-resistance, hardness and lighter weight. Silicon carbide has good mechanical properties like wear resistance, hardness, toughness and high melting point. Silicon carbide weight fractions …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 1, 2018 · pp. 15–32 Read article
-
Linear Stability in the Restricted Three-Body Problem with Oblate Primaries
Abstract: We present a study of the linear stability which is based on numerically we find that the critical mass ratio of the primaries forms a smooth surface and absence that c decrease as oblate parameter increase. In the restricted three-body problem the collinear points are unstable and equilateral triangular points are stable for the mass ratio . The numerical calculations give a thorough explanation of how changes in …
Published in Research & Reviews : Journal of Space Science & Technology · Vol. 15, Issue 2, 2026 Read article
-
Development of Robot Arm Fingers with Polymer Soft Materials
Abstract: Lightweight soft material applications have attracted attention to Basalt Fiber Reinforced Polymer (BFRP) laminates because of their impressive mechanical characteristics. The impact response and stress-strain behavior of epoxy resin laminates armored with basalt fiber and banana fiber are investigated during this project using computational and experimental approaches. The hand lay-up method was employed to create laminates with a thickness of 3 mm, dimensions of 300x300 mm², and a layout of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 432–439 Read article
-
Experimental Analysis and Design Proposal of Banana Fiber Reinforced Polymer Composites and Computer Analysis
Abstract: This study presents a comprehensive experimental investigation and design model development using banana fiber reinforced polymer (BFRP) composites. The primary aim is to evaluate the mechanical and physical performance of the composite, with particular emphasis on tensile strength, flexural strength, and water absorption characteristics. These properties are critical for applications in industries such as transportation and construction, where durability, lightweight materials, and cost-effectiveness are essential. Banana fibers, being natural, renewable, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 901–907 Read article
-
Exploring the Applications and Advancements of Copper and Copper Alloys in Modern Manufacturing Processes
Abstract: For industrial uses, copper represents one of the greatest technical materials offered. This review paper discusses on the history of copper and copper alloys, salient features of wrought and cast copper alloys, physical and chemical characteristics of copper alloys, classification of copper alloys, design for manufacturing of copper alloys, mechanical properties of cast copper alloys, role of lead in copper alloys and applications of copper alloys in various engineering industries. …
Published in International Journal of Industrial and Product Design Engineering · Vol. 1, Issue 2, 2023 · pp. 1–9 Read article
-
Assessment on the Physical Characteristics of Polymer Materials for Additive Layer Manufacturing Processes
Abstract: Polymer materials have the capacity to morph into a soft form and flow when heated, then return to their original hardness when cooled, making them excellent for heat fabrication procedures. Acrylonitrile Butadiene Styrene (ABS) is a high-grade polymer with exceptional mechanical qualities and heat resistance that is commonly used in aircraft and vehicle manufacture. These polymers are mixed with other materials to create alloys, which are primarily used in the …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 1–9 Read article
-
Elucidation of Physical Structural Stability of Nickel Nanoparticles Additive-Based Magnetorheological Grease
Abstract: This study investigates the influence of nickel nanoparticles on the physical properties and structural stability of magnetorheological grease (NMRG) as a smart composite. The incorporation of nickel nanoparticles aims to mitigate issues commonly observed in conventional magnetorheological grease (MRG), including particle aggregation within the fibrous matrix, limited material performance, and deformation instability. NMRG samples containing 1–5 wt% nickel nanoparticles were prepared using a mechanical stirring method. The tests focused on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–215 Read article
-
Enhancing Rhizoremediation of Petroleum Hydrocarbon-Contaminated Soil Using Brachiaria ramosa: A Review of Plant Growth Promotion and Degradation Potential
Abstract: This paper examines rhizoremediation as a sustainable and environmentally acceptable remediation technique in response to the growing problem of petroleum hydrocarbon pollution in soils. Brachiaria ramosa, a tropical grass species that may be useful in contaminated settings, is the main emphasis. A critical analysis of the literature on plant growth-promoting rhizobacteria (PGPR), microbial consortia involved in hydrocarbon breakdown, and rhizosphere-mediated degradation is conducted. There is a thorough discussion of important …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 16, Issue 1, 2026 · pp. 24–41 Read article
-
Polymer Composite Phase Change Materials: Materials Design, Processing, Characterization, and Structure–Property Relationships—A Comprehensive Review
Abstract: Polymer composite phase change materials (PCPCMs) have been recognized as an innovative category of multifunctional polymeric materials, which could be tuned by appropriate materials design, composite formation, and interface modification. With the incorporation of phase change materials in polymer matrix systems and functional fillers, PCPCMs show improved mechanical properties, physicochemical stability, and functionality in contrast to traditional phase change materials. With recent advances in polymer science, nanocomposites, and processing techniques, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Mechanical Performance Analysis of PET based Fibre Reinforced Concrete: A Review
Abstract: AbstractConcrete is characterized by various kinds of defects which include low tensile strength, low ductility, heavy weight and low energy absorption among others. Use of plastic wastes in concrete will result in safe, eco-friendly disposal as well as enhancement of certain physical and mechanical properties of concrete. Due to its certain user friendly and desirable properties such as low density, high tensile and impact strength, fabrication capabilities, long life, light …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 41–46 Read article
-
Crystal Defects and Their Characterization in Modern Materials Science
Abstract: The physical and chemical properties of crystalline solids are fundamentally dictated by deviations from structural perfection, known as crystal defects. From the point-scale vacancies that drive diffusion to the planar boundaries that determine mechanical strength, defects serve as the primary "tuning knobs" in material design. This review provides a comprehensive examination of point, line, and planar defects, exploring their formation energetics and their role in plastic deformation via crystallographic slip. …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 1, 2026 · pp. 15–19 Read article
-
Biodisintegrable Low-Density Polyethylene (LDPE)/Sago Starch (SS) Composites for Food Packaging Applications
Abstract: Research scientists are very interested in polysaccharide-filled plastics as a way to create a biodisintegrable polymer composite. The goal of the current study is to employ SS to create a biodisintegrable polymer composite, which could pave the way for a more user-friendly polymer composite in the future. In this study, LDPE/SS biodisintegrable composites were created by physically blending SS and LDPE in a Brabender mixer. The effects of varying the …
Published in Emerging Trends in Chemical Engineering · Vol. 9, Issue 3, 2022 · pp. 1–12 Read article
-
Material Characterization Analysis of Fiber Reinforced Composites
Abstract: The study investigates the physical characteristics of PAN carbon fabric/epoxy composite which is a material commonly utilized in aerospace, defense, and automotive sectors. The material has exceptional mechanical properties like high specific strength and hardness. The materials utilized in this experiment are T-300 PAN carbon fabric, LY556 Epoxy resin, and HY5200 hardener to create pre-preg materials. Then the laminate was pre- pregged in a die mold of identical shape matched, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 230–243 Read article
-
Green Synthesis of Biologically Active 2, 4, 5- Trisubstituted Imidazoles Catalyzed by Large Pore Zeolite H-BEA through Lophine MCRs
Abstract: 2, 4, 5-triphenyl-1(H)-imidazoles (popularly known as Lophine derivatives) are well known heterocyclic compounds and find significant diversified applications, not only in the area of medicinal chemistry as biologically active drug-like molecules, but also in the other advanced research areas, such as fluorescence labelling, biological imaging and chromospheres for non-linear optic system. In the present endeavour, a green synthesis of Lophine derivatives via multi-component reaction is carried out using benzil/benzoin, substituted …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 3, 2017 · pp. 20–36 Read article
-
An Experimental Investigation on the Characterization of Al6061-Polymer Adhesive Joint by Design of Experiment
Abstract: Aluminium alloys and polymers are the light-weight materials extensively used in structural, aero-space, automobile and marine applications. Al6061 alloy and nylon 6 were joined through the adhesive bond and their characteristics were analyzed. However, joining of these dissimilar materials for the evolution of hybrid engineering structures were complex because of their difference in physical, chemical and mechanical behaviours. The Taguchi’s, Design of Experiment were conducted on the various mixture of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 206–219 Read article
-
Production Methods, Mechanical Characteristics, and Industrial Uses for Metal Matrix Composites
Abstract: Advanced light-weight components known as composites from metal matrix are made of an element the alloy matrix with a second phase incorporated and dispersed throughout to improve certain properties. The composite's property varies according to the remaining phase's size, shape, and quantity. Because of its unique combination of ceramic and metallic features, it has better mechanical and physical qualities. These materials belong to a new breed of engineered materials that …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 1–5 Read article
-
Production Methods, Mechanical Characteristics, and Industrial Uses for Metal Matrix Composites
Abstract: Advanced light-weight components known as composites from metal matrix are made of an element the alloy matrix with a second phase incorporated and dispersed throughout to improve certain properties. The composite's property varies according to the remaining phase's size, shape, and quantity. Because of its unique combination of ceramic and metallic features, it has better mechanical and physical qualities. These materials belong to a new breed of engineered materials that …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 1–5 Read article
-
Mechanical Characterization of Green Composite Brake Pads Reinforced with Coconut Shell Waste
Abstract: In the present work, coconut shell powder proposed as a replacement material for the eco-friendly brake linings. The composites for brake pad were developed with other sizes of the coconut shell particles, namely (200 µm, 300 µm, 400 µm and 500 µm) The developed samples were evaluated for morphological, mechanical, physical and worability properties. The SEM micrograph proved that the coconut shell particulates are well dispersed in the composite everywhere …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
Poly Vinyl Alcohol/Kaolinite Clay/Grafted Cellulosic Fibre Based Hybrid Composite Films: Physical, Mechanical, Optical and Biodegdrability Studies
Abstract: In this study, physical, mechanical, optical, morphological and biodegdrability properties of poly vinyl alcohol (PVA)/kaolinite clay (KC)/grafted barley husk (GBH) based hybrid composite films were prepared by solution casting method. Barley husk was grafted with oleic acid using graft copolymerization method. The hybrid composite films were characterized by FTIR and SEM. Based on the findings from this work, water uptake of the composite films increased with increase in the amount …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 41–52 Read article