Search
40 articles for “peak value”
-
Development and Validation of a Robust RP-HPLC Method for Rufinamide Quantification in Pharmaceutical Dosage Forms
Abstract: The creation and validation of a simple, precise, and targeted reverse phase high-performance liquid chromatographic (RP-HPLC) approach allowed for the quantification of rufinamide in pharmaceutical dosage forms. With a mobile phase of methanol and water (50:50, v/v), the technique used a gradient mode Symmetry Qualisil gold C18 column (4.6 x 150mm, 5 μm). For the detection method, a flow rate of 1 mL/min was employed at 220 nm. During a …
Published in Emerging Trends in Personalized Medicines · Vol. 1, Issue 1, 2024 · pp. 25–32 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
On the Relationship between Equivalent Potential Temperature (theta-e) and Convective Rain over Nigeria and Togo
Abstract: Convective precipitation is a key feature of West Africa's climate, driven by the West African monsoon system. Accurate forecasting of convective storms is challenging but essential for disaster mitigation in the region. This study investigates the ability of using equivalent potential temperature (theta-e) for predicting convective rainfall events in West Africa. Theta-e combines the thermodynamic effects of moisture and temperature to represent total energy available for convection. Daily rainfall and …
Published in International Journal of Atmosphere · Vol. 3, Issue 1, 2026 · pp. 26–43 Read article
-
Comparative Evaluation of GPBB and CK-MB in Early Diagnosis of Acute Myocardial Infarction in Diabetic and Non-Diabetic Patients
Abstract: Background: Acute myocardial infarction (AMI) continues to be a leading cause of morbidity and death among people worldwide. To lower the risk of problems, early and precise diagnosis is essential, particularly for diabetes patients. The study investigates the diagnostic value of Glycogen Phosphorylase BB (GPBB), a potential early biomarker of myocardial necrosis, and compares it with CK-MB, a widely used cardiac marker, in AMI diagnosis. Inflammatory markers (hs-CRP, IL-6, TNF-α) …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 16, Issue 2, 2025 · pp. 33–37 Read article
-
Comparison of 11-Atom Armchair Graphene Nanoribbons and Zig-Zag Carbon Nanotubes in Polymer Composites Under Various Bias Voltages: A Study of Electronic and Transmission Properties
Abstract: In this research, 11-atom zig-zag carbon nanotubes (ZCNTs) and 11-atom armchair graphene nanoribbons (AGNRs) were studied under applied bias voltages at 50, 150, and 300 millivolt levels. The focus was on understanding their behaviour concerning transmission qualities, current-voltage (I-V) characteristics, and energy-momentum (E-K) diagrams. The Non-Equilibrium Green's Function (NEGF) approach was employed to analyse various electronic properties for ZCNTs and AGNRs, including transmission, E-K relationships, and I-V characteristics. The results …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 126–134 Read article
-
RP-HPLC Analytical Method Development and Validation for Quantitative Estimation of Metoclopramide Hydrochloride in Solid Oral Formulations
Abstract: RP-HPLC technique formulated for the numerical assessment of Metoclopramide Hydrochloride in tablet formulation has been confirmed for reliability. A C18 column facilitated the chromatographic separation using a mobile phase comprising 60:40 (v/v) potassium dihydrogen phosphate buffer: meth anol mixture. Such method was used to detect, where the retained time was 6.78 minutes and Metoclo pramide Hydrochloride produced a clear peaked at 273 nm. Results were in agreement with ICH Q2 …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 12, Issue 2, 2025 · pp. 07–15 Read article
-
Biochar-Filled Soy Protein Composites: Evaluating Thermal and Mechanical Properties for Sustainable Polymer Applications
Abstract: The growing demand for environmentally sustainable and biodegradable materials has intensified interest in alternative solutions for thermal insulation. This study explores the development of composite materials using mango seed shell biochar (MSSB) and soy protein isolate (SPI) as a biodegradable matrix-filler system. Mango seed shells, an abundant agro-industrial waste, were subjected to pyrolysis at 500°C for 2 hours to produce biochar. The resulting MSSB was incorporated into SPI with glycerol …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 60–71 Read article
-
Recent Advances in Polymer Analysis and Characterization Techniques for High-Performance Materials
Abstract: Polymers play a vital role in various fields, from biomedical engineering to energy storage. Developing high-performance polymers requires a deep understanding of their structure, properties, and behavior. This review paper delves into recent advancements in polymer analysis and characterization techniques. This paper is a comprehensive bibliometric analysis which investigates the research landscape of geopolymer concrete incorporating construction and demolition waste (CDW) by analyzing 389 publications from the Web of Science …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 76–93 Read article
-
Structural and Optical Properties of Nanocomposites of Polyethylene Oxide Embedded with Nano-ZNO
Abstract: Polymer nanocomposites have attracted significant attention in recent years owing to their unique properties and potential applications in a variety of fields. In this study, PEO-ZnO nanocomposites were prepared with different wt.% (5, 10 and 15) nano-ZnO particles incorporated into PEO matrix by a solution casting method. Structural and Optical properties of PEO-ZnO nanocomposites were studied. X-ray diffraction (XRD) studies suggest the incorporation of ZnO NPs into PEO matrix. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 586–600 Read article
-
Electromagnetic and Dielectric Performance of Polymer–Ceramic Composite Substrates for Fractal-Based IoT-Antenna Fabrication
Abstract: Polymer–ceramic composite substrates play a crucial role in determining the electromagnetic performance, mechanical stability, and thermal reliability of radio-frequency devices. In this work, a polymer-based composite substrate is systematically investigated for its suitability in compact IoT and RFID antenna applications. A fractal-structured antenna is employed as a functional test platform to evaluate the dielectric behavior, impedance characteristics, and radiation efficiency of the composite substrate. Novelty of the proposed reader antenna …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1518–1534 Read article
-
A Comparative Study of Zinc Oxide Nano Particles Synthesized by Hydrothermal, Sol-gel and Thermal Decomposition
Abstract: In the proposed work, Zinc oxide nano particles (ZnO NP's) are synthesized using three different methods: Hydrothermal, Sol-gel and Thermal decomposition. The samples are characterized using X- ray diffraction (XRD), UV visible spectroscopy (UV-Vis), Fourier Transform Infrared Spectroscopy (FT-IR) and scanning electron microscopy (SEM). The XRD pattern exhibit single-phase polycrystalline nature of all the samples exhibiting the most intense peak at (101). The diffraction peaks are located at 31.80, 34.46, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 39–45 Read article
-
An Investigation on Influence of Gamma Irradiation and Doping on Chemical Structure and Optical Properties of Conducting Polypyrrole
Abstract: In this study the authors report on effect of gamma irradiation and doping (bromine, iodine and sulfate ion) on chemical structure and optical, electronic properties of poly pyrrole. Optical absorption spectrum of PPY shown absorption bands centered around 36.2.5nm (peak 1), 450 nm (peak2) and 525 nm (peak 3) positions Gamma irradiation resulted in broaden of peak A together with a band shift of 45- 525 nm and disappearance peaks …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Investigation of Dielectric Properties of Lead-Free BaTiO3 Ceramic at Different Sintering Temperatures
Abstract: In the present study, Barium titanate (BaTiO3) was produced using the conventional solid-state sintering technique at three distinct sintering temperatures: 1000, 1100, and 1200°C. It was confirmed by the X-ray diffraction pattern that the perovskite phase was formed without secondary peaks and that the presence of the tetragonal phase was observed near room temperature. Upon conducting a frequency- dependent dielectric study, it was found that ceramic sintered at 1100°C exhibited …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 23–30 Read article
-
Heat Sink-PCM Device for PV Efficiency Improvement
Abstract: This paper is focused on the development of a second stage of a previous work where the PV panel efficiency is improved by using a hybrid system made up of a PCM attached to the rear side of the panel. This evolved stage incorporates a heat sink unit to improve the distribution of the heat removed from the panel; this improvement reduces the elapsed time to reach the steady state …
Published in Journal of Thermal Engineering and Applications Read article
-
From Outbreak to Output: Uganda’s COVID-19 Research Trajectory Through a Scientometric Lens
Abstract: The COVID-19 pandemic sparked an extraordinary global expansion in scientific research, with notable and growing contributions from low- and middle-income countries, including Uganda. This study presents a comprehensive scientometric analysis of COVID-19 related research output from Uganda, aiming to examine publication trends, authorship patterns, collaboration networks, source impact, and thematic focus. Bibliographic data were retrieved from the PubMed database using an advanced search strategy: “(COVID-19) OR (SARS-CoV-2)) AND (Uganda)” for …
Published in Journal of Advancements in Library Sciences · Vol. 13, Issue 1, 2026 · pp. 48–60 Read article
-
Optimizing Machinability in Wire EDM of AISI P20 Steel Employing Composite Material Wires with Hybrid Neural Network Approach
Abstract: AISI P20+Ni steel is extensively used for forging dies, plastic moulds, and automotive die components due to its excellent polishability, hardness, and homogeneity. This research utilizes Wire Electrical Discharge Machining (WEDM) to process pre-hardened AISI P20+Ni steel, focusing on minimizing both recast layer thickness (RLT) and kerf width (KW). The performance of wires made from composite materials, including zinc-coated brass wire (ZBW), cryogenically treated ZBW (CZBW), and ultrasonic vibration-assisted brass …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1120–1133 Read article
-
Photochemically Assisted LC–MS Method Development and Validation for Stability-Indicating Determination of Glasdegib in Rat Plasma
Abstract: A simple, precise, and cost-effective LC–MS method was successfully developed for the determination of Glasdegib in rat plasma. The method optimization was carried out by systematically varying key chromatographic parameters, including flow rate, injection volume, analyte concentration, and mobile phase composition, to achieve optimal sensitivity and resolution. A C18 Hypersil BDS column (150 mm × 4.6 mm, 3.5 µm particle size) was used for chromatographic separation, offering effective peak shape …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 4, Issue 1, 2026 · pp. 11–20 Read article
-
Seasonal Variation in the Weibull Parameters from In Situ Measurements and Model: A Case Study in the Bay of Bengal
Abstract: Seasonal variation of wind speed (U10) and its distribution are essential for the design of wind energy converters (WEC). In this study, year-round wind speed observations from a deepwater moored buoy at a location in the Bay of Bengal are used to assess the potential for wind power generation and are used to validate the ERA5 model. Model-U10 distribution is confined to low wind speeds with high occurrence in the …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 15, Issue 1, 2024 · pp. 30–40 Read article
-
Development of Web-enabled Smart Hospital Management System: Patient Data Visualization and Real-time Decision Making
Abstract: As everyone is aware, fewer people had access to healthcare services, which prevented many people from receiving the care they needed. The idea that, by WHO criteria, there should be one physician for every 1,000 patients is nearly unbelievable. Yet, India’s current ratio is a staggering 1:1445. This disparity highlights a serious gap in healthcare resources that cannot be ignored. Authors remember speaking with a friend who works in a …
Published in Journal of Instrumentation Technology & Innovations · Vol. 14, Issue 3, 2024 · pp. 41–46 Read article
-
Polymer–Gel Composite Phase Change Materials: A Functional Polymer Composite Approach for Solar-Thermal Energy Storage in Building Facades
Abstract: This study investigates polymer–composite phase change materials (PCMs) in the form of polymer–gel hybrids as multifunctional systems for solar–thermal energy storage in building façades. Paraffin- and PEG-based PCMs were embedded into polyurethane and acrylic gel matrices to create shape-stabilized polymer–composites with high PCM loading (70–80 wt%). Differential Scanning Calorimetry (DSC) confirmed distinct melting/freezing transitions at ~56°C (paraffin) and ~42°C (PEG), with enthalpy values of 120–150 J/g, closely matching theoretical predictions, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 36–51 Read article