Search
490 articles for “movement”
-
Detecting Winding Movement by Fuzzy Logic for Frequency Response of Power Transformer
Abstract: Power transformers are basically one of the most efficient devices that are used in Power Plant or in any substation. Its maintenance is bit some tedious but has to be done to diagnose any severe fault that may damage the transformer. Sweep Frequency Response Analysis (SFRA) is used to detect any winding or core deformation in transformer that would arise during transportation, due to severe short circuits or due to …
Published in Journal of Power Electronics and Power Systems · Vol. 5, Issue 3, 2015 · pp. 25–34 Read article
-
The Influence of Sediment Deposits in the Threshold Criteria of Sediment Movement in Rigid Boundary
Abstract: An effort is made to develop a simplified methods for the estimation of bed shear stress for rigid boundary for initiation of sediment motion using different bed thickness, bed slopes and different sediment particles diameters (ranging between (0.5mm < d50 < 4.78). The findings were compared with the earlier studies demonstrating that critical shear parameter value for fixed beds is less than the reported values in literature. This come in …
Published in Recent Trends in Civil Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 31–39 Read article
-
Controlling Movement of Vehicle Using Ultrasonic Sensor
Abstract: At the present years, the collisions are majorly caused by interruption of the driver to hit the brake or by the negligence by the driver. The present work aims to develop a model system that recommend an automatic braking in vehicle, which is system can operate spontaneouslywith the help of high profile sensors based on relay circuit and some changes in traditional braking system and apply the brake automatically in …
Published in Trends in Opto-electro & Optical Communication · Vol. 10, Issue 3, 2020 · pp. 22–27 Read article
-
Perceived Joint Discomfort Rating in Neck and Back Movement away from Neutral in Sitting and Standing Posture
Abstract: The objectives of the study is to observe the effects of deviation from neutral position on the perceived joint discomfort rating in neck and back in sitting and standing position. It is an observational study. Subjects were recruited from Dolphin (P.G.) Institute of Biomedical and Natural Science, Dehradun. A total of 40 subjects were recruited for the study on the basis of inclusion and exclusion criteria after signing the informed …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 3, Issue 1, 2014 · pp. 13–23 Read article
-
Perceived Joint Discomfort Rating in Neck and Back Movement away from Neutral in Sitting and Standing Posture
Abstract: The objectives of the study is to observe the effects of deviation from neutral position on the perceived joint discomfort rating in neck and back in sitting and standing position. It is an observational study. Subjects were recruited from Dolphin (P.G.) Institute of Biomedical and Natural Science, Dehradun. A total of 40 subjects were recruited for the study on the basis of inclusion and exclusion criteria after signing the informed …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 3, Issue 1, 2014 · pp. 13–23 Read article
-
Numerical Simulation of Mitigation of Soil Swelling Problem under Communication Tower Using Helical Piles
Abstract: AbstractExpansive soils exhibit significant volume changes with variations in soil moisture content. Expansive soils are often considered as problematic soils. It undergoes large volume changes upon wetting and drying and causes huge damages to the structures resting on it. Numerical modeling was carried out by using PLAXIS 3D-2013 software, in which modeling the soil by using hardening soil model was done. Tower rested on expansive soils are subjected to uplift …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 3, 2017 · pp. 35–46 Read article
-
Review of IoT Based Smart Housekeeping Robot
Abstract: AbstractThis project has reviewed and implemented an internet of things (IoT) based indoor mobile robot. The robot is used for the housekeeping service through wireless fidelity (Wi-Fi) and called as “smart housekeeper”. The aim of the project is to implement IoT technology for housekeeping robot working as smart. The robot is equipped with wheel structure, camera holding structure and arm lifting machinery. It applies ATmega32 as the main controller and …
Published in Recent Trends in Electronics Communication Systems · Vol. 5, Issue 1, 2018 · pp. 1–6 Read article
-
Modernized Art for a Smarter Environment
Abstract: Gesture recognition is a technology that uses the mathematical algorithms to identify human gestures. Gesture recognition recognizes the hand, tracks its movements, and provides information about hand position, orientation, and finger flux. This research work describes a sophisticated and user-friendly Human Computer Interaction (HCI) technology that employs the Raspberry Pi to easily translate user intentions into corresponding commands and output. The proposed system overcomes the disadvantages present in the existing …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 10, Issue 1, 2022 · pp. 7–14 Read article
-
A Study to Assess the Effectiveness of Home-based Stretching Exercises on Joint Pain Among Clients with Osteoarthritis in Selected Old Age Home, Rajkot City, Gujarat
Abstract: Osteoarthritis (OA) is a commonly encountered condition in middle-aged and older individuals, marked by its slow development. Strengthening exercises targeting the quadriceps muscles, situated in the front thigh, can mitigate knee pain, and reduce disability associated with OA. The musculoskeletal system encompasses the bones of the skeleton, the joints where these bones connect, and the muscles responsible for enabling and regulating movement. The knee, the largest and most complex joint, …
Published in International Journal of Orthopedic Nursing and Practices · Vol. 1, Issue 2, 2023 · pp. 24–28 Read article
-
Physical Activity Based Vehicle Control Using ESP32
Abstract: This paper introduces an optimized and reliable project named Move-Buddy, a device that encourages physical movement in children. This is a way of engaging children in a game which causes them to move their body in different positions (e.g., wave their arms and move their legs) for the device to move forward, backward, left, and right according to the action performed by the child. The device uses multiple sensors placed …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 11, Issue 3, 2023 · pp. 32–42 Read article
-
A Vision to Reduce Orthodontic Treatment Duration
Abstract: There is an increased tendency for researchers to specialise in accelerating methods for tooth movement; thanks to the greater demand of adults for a shorter treatment duration. Long treatment time has many disadvantages such as higher predisposition to caries, gingival recession and root resorption; this increases the demand to increase tooth movement with the least possible disadvantages. Many techniques have been introduced for accelerating the tooth movement. Thus, accelerating orthodontic …
Published in Research and Reviews: A Journal of Dentistry · Vol. 11, Issue 1, 2020 · pp. 29–34 Read article
-
REPEATED MOPs VS DUAL APPROACH IN ACCELERATED ORTHODONTICS
Abstract: In contemporary orthodontics, there is a pressing need to minimize treatment duration, which is often a concern for both orthodontic specialists and patients. Prolonged treatment periods not only pose logistical challenges but also increase the risks of various dental issues such as cavities, periodontal problems, chronic discomfort, and root resorption. Accelerated orthodontics has emerged as a promising solution to address these challenges. Numerous efforts have been undertaken to expedite orthodontic …
Published in Research and Reviews: A Journal of Dentistry · Vol. 15, Issue 1, 2024 · pp. 16–21 Read article
-
Autonomous Vehicle with Obstacle Evasion Capability
Abstract: This paper involves the design and implementation of an obstacle-avoidance vehicle. The goal of this project is to build a vehicle that, when in motion, can recognize obstructions in its route and, in the absence of outside interference, alter course as essential. Based on sensor inputs, the robot determines the new direction to prevent a collision as the direction with the largest distance between the obstacle and the sensor. An …
Published in International Journal of Robotics and Automation in Mechanics · Vol. 2, Issue 1, 2024 · pp. 6–13 Read article
-
Eyes for Machines: A Computer Vision Approach to Enhance Robotic Arm Dexterity and Autonomy
Abstract: By combining sophisticated robotics and visual awareness, computer vision operated robotic arms have revolutionized technology. These devices are having a profound effect on several industries, from manufacturing processes to healthcare. Computer vision–controlled robotic arms are altering the game with their ability to see, comprehend, and interact with their surroundings. In this study we have tried to develop and implement software and hardware to improve the freedom of movement in a …
Published in International Journal of Advanced Control and System Engineering · Vol. 2, Issue 2, 2024 · pp. 28–33 Read article
-
Monitoring of Disable Patients with their Medical conditions using K-NN Classifier Algorithm
Abstract: In this paper a general procedure for the infirmity assessment of patients with ineptitudes is presented. It relies upon consistently activity examination using ordinary accelerometer sensors conveyed by the noticed person while at home without clinical staff present. The k-NN classifier is being used to study six different types of activities after preliminary data pre-planning, followed by further decreases in estimation and confirmation time. Promising results are gotten which could …
Published in Current Trends in Signal Processing · Vol. 12, Issue 2, 2022 · pp. 1–7 Read article
-
Mitigation of Expansive Soil Problems by Using Helical Piles with Additives
Abstract: In this study, nine essential additives in addition to three mixed additives with different ratios have been chosen and implemented during the installation of helical pile. The choice took into consideration that some of the additives were cheap and available in the local market; others were waste materials such as ceramic, brick fragments and coal fly ash. Some relatively expensive additives such as silica fumes were also added because it …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 3, 2015 · pp. 30–40 Read article
-
Improvement in Working Efficiency of Worker by using Micro and Memo Technique in Welding Operation
Abstract: The Micro motion methodology is good suited for those operations or activities which are of small or short duration, and which are repeated many or say hundreds of times. These are the operations or motions which require time (very small), and it is quite difficult to measure time for these motions accurately and the time required by these motions cannot be neglected due to repetitive operations, which are developed in …
Published in Journal of Industrial Safety Engineering · Vol. 9, Issue 1, 2022 · pp. 5–8 Read article
-
Computer Vision Controlled Robotic ARM
Abstract: By combining sophisticated robotics and visual awareness, computer vision operated robotic arms have revolutionized technology. These devices are having a profound effect on a number of industries, from manufacturing processes to healthcare. Computer vision controlled robotic arms are altering the game with their ability to see, comprehend, and interact with their surroundings. In this study we have tried to develop and implement software and hardwares to improve the freedom of …
Published in Journal of Instrumentation Technology & Innovations · Vol. 13, Issue 3, 2023 · pp. 1–6 Read article
-
Voice Controlled Robotic Vehicle for Automated Agricultural Spraying
Abstract: Robotics has a huge scope in various fields. Its purpose is very important for executing complex work into more conveniently way. There are a lot of research going on for effective connection between humans and robots. The paper presents the research of the designing & development of voice controlledrobotic vehicle for automated agricultural spraying. The robotic control system of the movement will be done by the voice commands and the …
Published in Trends in Machine design · Vol. 10, Issue 1, 2023 · pp. 53–58 Read article
-
Human Gesture Based Wireless Robotic Arm Using Matlab
Abstract: Wireless motion control using human gestures is a prominent field. Once this field gets completely explored, there are a lot of advantages. The main advantage of this paper is to reduced hardware, thus making user-friendly motion control. The primary goal of the project is to control every real-time motion of an arm based 4-wheel drive using wearable colored finger bands of suitable intensity. Each color movement corresponds to a particular …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 6, Issue 1, 2018 · pp. 25–28 Read article