Search
324 articles for “load analysis”
-
Aerodynamic Effects of Wind on Multi-Story Structures: A Height- and Terrain-Based Analysis
Abstract: Wind loads are a critical consideration in the structural design of buildings, with direct implications for safety and serviceability. This study investigates the aerodynamic behavior of reinforced cement concrete (RCC) buildings under varying heights and terrain conditions, in accordance with IS: 875 (Part 3): 2015. 12 structural models representing 20 m, 35 m, and 50 m tall buildings were analyzed using extended three-dimensional analysis of building system (ETABS) across four …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 3, 2025 · pp. 1–14 Read article
-
Analysis of Steel Chip Fiber Reinforced Composite Dual Pile Under Lateral Load Conditions on Sloping Terrain
Abstract: Pile foundations, in addition to supporting vertical loads from superstructures, are subjected to lateral stresses arising from seismic activities, wind gusts, water currents, and traffic impacts etc. Failure to account for these lateral forces can pose significant risks if the structure is expected to encounter any form of lateral pressure. Previous research has investigated the behavior of individual composite piles under horizontal forces, considering different soil properties, to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 210–220 Read article
-
Seismic-Resilient Structural Systems: Geotechnical Engineering
Abstract: Earthquakes represent one of the most destructive natural hazards, capable of causing severe structural damage, loss of life, and substantial economic disruption. Seismic waves propagating through the ground can induce excessive forces and deformations in buildings, often leading to partial or complete collapse. Statistical records indicate that thousands of earthquakes occur globally each year, including several major events that result in significant damage. Past earthquake disasters have repeatedly demonstrated that …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 1, 2026 · pp. 55–63 Read article
-
Performance-Based Wind Response Analysis of Tall RCC Iregular Structures Using Autodesk Revit and Robot Structural Analysis
Abstract: The increasing trend of vertical construction has made wind effects a critical consideration in the design of tall reinforced concrete (RCC) buildings. The response of such structures is largely governed by their geometric configuration, stiffness characteristics, and modelling accuracy under wind loading conditions Wind loads are evaluated based on standard provisions such as IS 875 (Part 3): 2015, which provide essential guidelines for structural safety This study focuses on evaluating …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 3, 2026 Read article
-
Analysis and Design of Modern Parking Structure by Considering Optimised Bracing Systems Under the Dynamic Load
Abstract: The design and implementation of effective bracing systems are crucial for ensuring the structural stability and safety of G+10 parking buildings, particularly in regions prone to seismic and wind loads. This study evaluates and optimizes various bracing systems, including X-type, V-type, Inverted V-type, and Eccentric bracing, to determine their suitability for use in G+10 parking structures in the Chhatrapati Sambhajinagar City area. The research focuses on assessing each bracing system's …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 61–76 Read article
-
Comparative Seismic Analysis of Multistorey Core in Core Structure Using Beam, Fluid
Abstract: The main objective of this paper is to analyze and study the comparative analysis of multistorey core in core structure with beam, Fluid viscous dampers and bracings using Etabs. Core in core structures, also known as dual core structures, are a structural design concept employed in high-rise buildings to enhance their structural performance and increase resistance to lateral loads such as wind and earthquakes. The concept of core in core …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 212–223 Read article
-
Analysis of an Extradosed Bridge with Single Plane Cable System
Abstract: The extradosed bridge is a bridge that combines elements of a cable-stayed bridge and a prestressed concrete box-girder bridge. This innovative design offers several advantages, including improved aesthetics, reduced construction costs, and enhanced durability. The extradosed cable system provides additional support to the bridge deck while maintaining a lower overall height compared to traditional cable-stayed bridges. This feature makes extradosed bridges particularly suitable for environments where height restrictions are a …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 25–31 Read article
-
Analysis aspects of pressure tank: A review
Abstract: This review paper presents a detailed analysis of pressure vessels, focusing on finite element analysis (FEA) to evaluate structural integrity. Pressure vessels are widely used in industries such as chemical processing, power plants, and oil refineries, where they are subjected to extreme temperature and pressure conditions. Ensuring their safe and efficient operation requires a thorough understanding of stress distribution, deformation characteristics, and failure mechanisms. This study reviews existing research on …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 49–55 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Computation of the Necking in Bars Without Geometrical Imperfection
Abstract: This paper presents a finite element analysis to compute the neck profiles of smooth, circular cylindrical bars in shear-free grip under uniaxial tensile load. The analysis uses 4-node quadrilateral element with linear displacement variation, as well as 8-node Serendipity quadrilateral element with curved sides and a quadratic variation of the displacement field, for power law hardening materials that follow von Mises plasticity. All the elements are based on isoparametric formulation. …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 10–19 Read article
-
An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres
Abstract: The innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable construction material derived from GGBS. The primary objective of the study is to explore the potential of Alccofine particles in varying proportions in combination with 0.5% steel fibers to uplift the flexural strength of the engineered concrete. As concrete is known to be a brittle material once hardened, exhibits …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 87–97 Read article
-
Influence of Carbonyl Iron Particle Loading on the Dimensional and Rheological Properties of 4D-Printed TPU-Based Magnetorheological Elastomers
Abstract: The advancement of 4D printing technologies has created new opportunities for fabricating smart materials with tunable properties, including magnetorheological elastomers (MREs). This study investigates the fabrication and characterization of thermoplastic polyurethane (TPU)-based MREs with varying carbonyl iron particle (CIP) loadings (10–50 wt.%) using the fused filament fabrication (FFF) method. MRE filaments were produced through a solvent-assisted mixing and extrusion process, ensuring consistent diameters within 1.75 ± 0.10 mm. Test specimens …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 127–138 Read article
-
Production of Injection Moulded Natural Fiber Reinforced Hybrid Composites and Assessment of Hybridization’s Effect on Mechanical Properties
Abstract: Over the past two decades, rising environmental awareness, public concern over waste, and stricter government regulations have encouraged companies to reduce their reliance on petroleum-based fuels and products. Consequently, there is a clear need to find sustainable, eco-friendly substitutes for the materials currently in use. This shift has renewed attention on renewable resources and sparked wider interest in advanced composites and green materials research. With this in mind, the present …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 246–271 Read article
-
Optimal Placement and Sizing of STATCOM for Loss Reduction and Voltage Profile Enhancement Using Genetic Algorithm
Abstract: Electric power distribution networks frequently experience significant power losses and voltage profile deterioration due to increasing load demand and inadequate reactive power compensation. This study investigates the enhancement of the Eleme distribution network in Rivers State through voltage upgrading and optimal deployment of a Static Synchronous Compensator (STATCOM). The existing network consists of a 5.56 km, 11 kV radial distribution system supplying seventeen distribution transformers with a cumulative load demand …
Published in Journal of Power Electronics and Power Systems · Vol. 16, Issue 2, 2026 Read article
-
Low-Weight, High-Durability Crankshaft Development Using Glass Fiber Composites: Numerical and Experimental Investigations
Abstract: The present paper aims towards the weight reduction of crankshaft by replacing conventional medium carbon steel for a two-wheeler with composite material. The replacement is such that it significantly reduces load on other components without compromising structural integrity. It will also serves in terms of operating reliability or durability over its life span. A geometric specifications and dimensions were obtained using a 3D CAD model developed in CATIA V5. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Evaluating Diagrid Systems: A Modern Approach to Lateral Load Resistance Across Varied Building Heights
Abstract: Modern architectural design and engineering often incorporate advanced structural systems, with diagrid structures becoming popular for high-rise buildings due to their unique geometric patterns and aesthetic appeal. Despite considerable global research on diagrids, a detailed comparative analysis of their structural efficiency remains limited. This thesis assesses the structural efficiency and seismic performance of diagrid lateral load-resisting systems. The effectiveness of diagrids was compared to conventional building designs in multi-storey buildings …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 1–12 Read article
-
Structural Assessment of Rigid Pavement Systems Under Heavy Loading Conditions
Abstract: This study presents an analysis of pavement and foundation layer design subjected to heavy vertical loads and upward soil pressure. A total load of 1716 tonnes transmitted from the superstructure is considered acting on the pavement system. Due to upward soil pressure, tensile stresses develop in the foundation layers, requiring adequate thickness of sand and aggregate layers to ensure structural stability. Based on the tensile strength of sand (2 N/mm²), …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 36–48 Read article
-
Topology Optimization of Press Tools for Additive Manufacturing: Reducing Manufacturing Time
Abstract: This research paper presents a topology optimization study of a press tool consisting of a punch and a die, with the aim of optimizing the press tool topology to reduce material usage, and manufacturing time while maintaining necessary strength. The tools will be manufactured using additive manufacturing technology with Polylactic Acid (PLA) material. The Additive Manufacturing method can be used to make prototypes of press tools in the development stages. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 40–56 Read article
-
Experimental Study on Load Transfer Mechanism in Columns Retrofitted by Bonding Precast Segments and FRP Wrapping
Abstract: An experimental study was conducted to investigate the load transfer mechanism in columns retrofitted with precast segments and Fiber-Reinforced Polymer (FRP) wrapping. As the demand for structural retrofitting grows, it becomes crucial to comprehend the behavior and effectiveness of retrofit techniques to ensure the safety and integrity of existing infrastructure. The study involved subjecting a series of column specimens to axial compression loads in order to evaluate the load transfer …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 153–165 Read article
-
Structural Behavior of Flexible and Semi-Rigid Beam-Column Joint Connections by FEM
Abstract: This study investigates the structural behavior of flexible and semi-rigid beam-column joint connections in cold-formed steel (CFS) structures, focusing on the use of Finite Element Modeling (FEM) to simulate their performance under various loading conditions. Traditional analysis methods often oversimplify beam-column connections, treating them as either perfectly rigid or fully flexible, which does not accurately capture real-world joint behavior. In reality, many beam-column joints exhibit semi-rigid characteristics, where the stiffness …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article