Search
173 articles for “elemental composition”
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Finite Element Analysis of Spur Gear Manufactured of Al7475-SiC Composites
Abstract: The spur gear is used in power transmission systems in industrial and automotive sectors. But sometimes, these gears have problems with their teeth due to excessive stress and wear. Some gears don't work as well, so in the present work better material is used to make them work well. Composite materials, which is known for their optimal strength-to-weight ratio and weight reduction benefits. So, these materials are considered substitutes for …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 279–284 Read article
-
Synthesis and Characterization of VO 2+ doped SrMg 2 (PO 4 ) 2 Nanopowder by Solid State Reaction technique suitable for White LED material
Abstract: VO2+ doped SrMg2(PO4)2 nanopowder was synthesized by using solid state reaction (SSR) technique. Various experimental techniques have been performed on prepared sample. XRD analysis has revealed that prepared nanopowder is in monoclinic phase. The average crystallite size, micro strain and dislocation density evaluated and make an analogy with W-H plot method. SEM micrographs shows that agglomerated stone like structure and EDS spectrum shows elemental compositions of synthesized sample. FTIR spectrum …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 95–110 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
Bio Materials and Nanotechnology: Green Tea (Waste)– Aluminium Nanoparticles (Gt-Al Nps) For Methylene Blue Adsorption
Abstract: This study examines the adsorption of Methylene Blue (MB) dye from aqueous solutions using Aluminium Nanoparticles synthesized with green tea powder as a biological reducing agent. Methylene Blue, an aromatic phenothiazine dye, is widely applied in medical diagnostics and various industrial processes, but its uncontrolled release into water bodies leads to environmental pollution due to its intense colour, stability, and potential toxicity. Therefore, identifying an efficient and eco-friendly adsorbent for …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 96–107 Read article
-
AI-Enabled Optimization of Additively Manufactured Composite Materials for Enhanced Mechanical and Thermal Performance
Abstract: This paper discusses the optimization of multi-objective optimization of enhanced coupling of heat and mechanical properties of 3D printed polymer composite materials by artificial intelligence (AI), as a component of a multi-objective optimization framework. It aims at development of nonlinear printing parameters and material properties relationships to achieve maximum tensile strength and thermal conductivity in polymer composites produced through fused deposition modeling (FDM). Short carbon fiber reinforcement was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 867–891 Read article
-
Synthesis and Study of Different Thioamides as Corrosion Inhibitors
Abstract: Many organic compounds having electron rich atoms in their structures, such as nitrogen, and sulphur are widely use in lubricating additives, in the oil industry to minimize corrosion. The presence of electron rich atoms in the molecules increases its ability to form coordinate covalent bonds with the metal atoms, involved in the corrosion environment. Compounds based on fatty amines, aromatic amines, imidazoline, diamidazoline, and fatty amides are now, uses as …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 3, 2016 · pp. 18–25 Read article
-
Studies on two recently commercialized scintillators for gamma-ray spectroscopy and imaging
Abstract: The present work is aimed to study some characteristics of the two recently commercialized CRY18 and CRY19 crystals (Crytur, Cz), namely the elemental compositions, and the suitability of a TiO 2 -based white-pigment as light-reflector around the blind faces of the scintillators. The energy dispersive X-ray fluorescencetechnique has been used for the first goal while the second one has been performed by comparing the emission spectrum of the first crystal …
Published in Journal of Nuclear Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 24–32 Read article
-
Analysis of Specially Configured Large Ferrocement Water Tank
Abstract: Ferrocement construction technology is quite popular throughout the world for a long time. Ferrocement, a thin element composite of cement concrete mortar, wire mesh with skeleton steel is used as a building construction as well as a repair material. In this work, a special configuration is selected with different bar arrangement used for supporting skeleton steel in a large ferrocement water tank. Welded wire mesh is used in this water …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 12–19 Read article
-
Finite Element, Experimental, and Machine Learning-Based Optimization of Machining Stability for Polymer Composite Material Processing
Abstract: The machining of polymer composite materials, particularly fibre-reinforced polymer-matrix composites, requires stable spindle-tool performance to avoid delamination, fibre pull-out, matrix cracking, thermal softening, poor surface integrity, and premature tool wear. In line with the scope of the Journal of Polymer & Composites, this study presents an integrated finite element, experimental, and machine learning framework for improving machining stability during end-milling of composite material systems. The spindle-tool assembly is modelled using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Study of Strength of Composite Laminates with Ply- Discontinuities Using FEM
Abstract: Present research work attempts to understand the effect of ply-discontinuities on the strength of the FRP Composite. Finite Element Analyses have been performed for specimen undergoing four-point bend loading condition using ABAQUS software. Three specimens consisting of different ply sequences, same resin pocket size and location have been considered for the present analysis. Cohesive zone modelling technique is implemented to simulate and predict crack propagation pattern during failure of composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 89–98 Read article
-
Microstructure Analysis and Material Properties of Weld Slag as Fine Aggregate in Concrete
Abstract: To reduce the amount of river sand used, researchers and engineers have developed their own solutions. The well-known technique of submerged-arc welding can create high-quality welds in a variety of thicknesses for ferrous, stainless, and even some non-ferrous metals. The procedure involves an electric current flowing constantly between a welding wire and the work piece, creating an arc. In submerged arc welding, the shielding flux is transformed into slag during …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 13–18 Read article
-
Computational Analysis of Leaf Spring System with Functionally Graded Materials Using ANSYS
Abstract: Leaf springs are important parts of a vehicle’s suspension system, and their main function is to absorb shocks, improve stability, and make the ride more comfortable. Traditionally, ASTM A36 steel is used because it is strong, long-lasting, affordable, and easy to get. However, this type of steel is very dense, which makes vehicles heavier. This extra weight makes the vehicle less efficient and increases emissions. Because of these issues, there …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 380–397 Read article
-
Fracture Analysis of FRP Composites under Thermo-Mechanical Loads for Different Geometry Cutouts
Abstract: Fiber-reinforced composites (FRPs) are used extensively in structural and non-structural components of the aerospace and automotive industries. To utilize these materials for structural applications, it is necessary to understand the fracture behavior of the material. In the present investigation of carbon fiber laminates, studies were carried out to understand the fracture toughness characteristics of the carbon fiber laminates with mechanical, thermal, and thermo-mechanical loadings of modes I, II, and III. …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–10 Read article
-
Static and Dynamic Analysis for Optimum PZT Positioning and Optimum Voltage in a Delaminated Smart Composite Beam
Abstract: This paper conducts a comprehensive static and dynamic analysis of a delaminated composite beam with and without a piezoelectric layer making use of the principle of minimum potential energy. A new finite element model for composite laminate with delamination defect using cohesive zone method is developed using ANSYS APDL. A lead zirconate titanate (PZT) patch is embedded over the delaminated model following the results obtained from static analysis. The work …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 13–27 Read article
-
Synthesis and Characterization of In2S3 Nanoflake Thin Film for Photosensor Applications
Abstract: Indium sulphide (In2S3) thin films in the form of nanoflakes are synthesized by using chemical vapour deposition method on glass substrate with the intension to test its photosensor applications. These as deposited nanoflake thin films are characterized for physicochemical properties using X-ray diffraction (XRD) pattern, energy dispersive X-ray (EDAX) analysis,scanning electron microscopy (SEM) while optoelectronic properties were studied using optical and electrical characteristics obtained through UV-Vis transmission spectroscopy and I-V …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 21–26 Read article
-
Photoluminescent Reduced Graphene Oxide (rGO)–ZnO Nanocomposites Prepared Through one-pot Solvothermal Route
Abstract: In the present article, we report solvothermal synthesis of reduced graphene oxide (rGO)–ZnO nanocomposites through in situ exfoliations of graphite oxide with two different zinc-containing precursors viz. Zinc acetate dihydrate and zinc(II) acetylacetonate in water-diethylene glycol medium with hexamethylenetetramine as a reducing agent. The obtained rGO–ZnO nanocomposites were characterized by X-ray diffraction, and the ZnO lattice parameters were calculated. Raman spectroscopy indicated the presence of characteristic bands of graphene and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 70–80 Read article
-
AI-Driven Prediction of Mechanical and Thermal Properties in Polymer-Based Functionally Graded Composites
Abstract: The proposed architecture of the current paper is an artificial intelligence (AI)-driven model of forecasting mechanical and thermal aspects of polymer-based functionally-graded composites (FGCs). Traditional micromechanical and finite element models, which are practical in homogeneous composites, might not be able to account in nonlinear interaction that is caused by compositional gradient. To overcome the challenge, machine learning (ML) models like artificial neural network (ANN), support vectors regression (SVR), and gradient-boosted …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 70–89 Read article
-
Role of Polymer and Composite Materials in Enhancing Durability and Comfort of Urban Park Furniture for Senior Citizens
Abstract: Parks in urban areas are crucial in facilitating physical activities, socialization, and or mental health to the elderly citizens. Nonetheless, the traditional materials in outdoor park furniture may suffer in the form of low durability, weathering, ergonomics and maintenance, among other aspects and restrict long term applications of such furniture by the elderly population. The research question examined in the proposed study is: How can polymer-based and composite materials improve …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 297–311 Read article
-
Simulation of Propeller Shaft for Composite Material
Abstract: Composites are today widely used to design the automobile components as they have outstanding specific stiffness and strength properties. Weight reduction can be primarily achieved by the introduction of better material. The conventional system uses metallic shaft, has inherent limitations like heavy weight, corrosion, flexibility problems, vibrations, which magnifies with increase in shaft diameter. Advanced composite materials offer the potential to improve propulsion shafting, by reducing weight, bearing loads, alignment …
Published in Current Trends in Signal Processing · Vol. 10, Issue 3, 2020 · pp. 16–31 Read article